[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [gpsd-users] GPSD -G Option Doesn't Always Work

From: B.W. Guffey
Subject: Re: [gpsd-users] GPSD -G Option Doesn't Always Work
Date: Wed, 17 May 2017 06:07:11 -0400

That's essentially what I concluded...  It's not used enough by others
for them to understand what I was attempting to achieve, and I'm not
programmer enough to fix it myself.

I did notice, however, that the client gpsd would fail immediately upon
connection attempt - not the server gpsd.   I was still able to telnet
to the 2947 port after a failed connection attemt.

I wrote about it here so the error messages are somewhere in the list
archive along with the code that I think is to blame.

On Wed, 2017-05-17 at 08:14 +0200, Florian Petry wrote:
> When I was investigating this some time ago, I also asked in the IRC
> channel, and the -G in combination with "gpsd://..." seems to be a
> relatively seldom used function.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]