[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[gpsd-users] Cannot assign requested address

From: Dario Arena
Subject: [gpsd-users] Cannot assign requested address
Date: Sun, 26 May 2013 14:55:34 -0000

Hello guys. I hope you can give me a hand with this.

I'm using a bluetooth usb dongle to connect to my GPS receiver.
This seems to work as if I use the command:

cat /dev/rfcomm0

I receive data from the GPS. I also did a symbolic link and If I try:

cat /dev/ttyS0007

I receive the same data so until here, everything seems to work.
I can't say so for gpsd. I can't run it.
I also tried "sudo dpkg-reconfigure gpsd e followed the wizard
with the path /dev/rfcomm0 or /dev/ttyS0007 but then if I start
gpspipe -r or cgps or xgps, none of them seem to see gpsd
as it's not even running.

If I try to run it manually with:

gpsd -N -D3 /dev/ttyS0007

I get this:

gpsd:INFO: launching (Version 3.6)
gpsd:ERROR: can't bind to IPv4 port gpsd, Cannot assign requested address
gpsd:ERROR: can't create IPv6 socket
gpsd:DATA: command sockets creation failed, netlib errors -1, -1

Please, can you give me a hand? :( Thanks a lot!

reply via email to

[Prev in Thread] Current Thread [Next in Thread]