Re: Synology DS110j Command Timeout

[Woolers]

Daniele Forsi <dforsi <at> gmail.com> writes:

> 
> 2010/8/13 Woolers:
> 
> > However, smsd which is also built at the same time as gnokii has the same
> > original problem. Typing smsd leads to a message being sent to the phone but
> > the phone not replying. It times out after 3 attempts.
> 
> did you remove the older version?
> can you show the debug log of this timeout?
> 
> > In addition, there is a
> > message about a spooling directory which I've no idea about.
> 
> that's for the file module, search for "spool" in man smsd for this


Hi Daniele,

When I run gnokii --identify I get the following:


DiskStation> gnokii --identify
GNOKII Version 0.6.28
LOG: debug mask is 0x1
LOG: xdebug mask is 0x1
Config read from file /root/.gnokiirc.
phone instance config:
model = series40
port = 1
connection = dku2libusb
initlength = default
serial_baudrate = 19200
serial_write_usleep = 10000
handshake = software
require_dcd = 0
smsc_timeout = 20
rfcomm_channel = 0
sm_retry = 0
Connecting
Serial device: opening device USB
Ignoring extra header, type 171, length 5
Found FBUS interface
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
Message received: 0x1b / 0x0032
01 43 00 08 00 01 58 2c 00 26 56 20 30 35 2e 32 |  C    X, &V 05.2
34 0a 32 35 2d 31 31 2d 30 34 0a 52 48 31 32 5f | 4 25-11-04 RH12_
32 38 5f 2d 0a 47 53 4d 20 50 31 2e 31 0a 43 00 | 28_- GSM P1.1 C 
00 00                                           |                 
Received message type 1b
model length: 9
Received model RH12_28_-
Found model "RH12_28_-"
Identifying...
Message sent: 0x1b / 0x0005
00 01 00 00 41                                  |     A           
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
Message received: 0x1b / 0x001a
01 43 00 01 00 01 41 14 00 10 33 35 35 36 36 35 |  C    A   355665
30 30 38 33 36 30 34 30 37 00                   | 008360407       
Received message type 1b
Received imei 355665008360407
Message received: 0x1b / 0x0032
01 43 00 08 00 01 58 2c 00 26 56 20 30 35 2e 32 |  C    X, &V 05.2
34 0a 32 35 2d 31 31 2d 30 34 0a 52 48 31 32 5f | 4 25-11-04 RH12_
32 38 5f 2d 0a 47 53 4d 20 50 31 2e 31 0a 43 00 | 28_- GSM P1.1 C 
00 00                                           |                 
Received message type 1b
Received revision V 05.24
model length: 9
Received model RH12_28_-
IMEI         : 355665008360407
Manufacturer : Nokia
Found model "RH12_28_-"
Model        : 6230
Product name : RH12_28_-
Revision     : V 05.24
Serial device: closing device

However, when I run smsd I get:


DiskStation> smsd -u root -dsms -clocalhost -mmysql
smsd - version 1.4.4 from gnokii 0.6.28
LOG: debug mask is 0x1
LOG: xdebug mask is 0x1
Config read from file /root/.gnokiirc.
phone instance config:
model = series40
port = 1
connection = dku2libusb
initlength = default
serial_baudrate = 19200
serial_write_usleep = 10000
handshake = software
require_dcd = 0
smsc_timeout = 20
rfcomm_channel = 0
sm_retry = 0
Connecting
Serial device: opening device USB
Ignoring extra header, type 171, length 5
Found FBUS interface
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
Serial device: closing device
Telephone interface init failed: Command timed out.
Quitting.
fbusinit: error 11
GSM/FBUS init failed! (Unknown model?). Quitting.
Command timed out.

I removed the old gnokii before building this new version.

Any insight you can give me would be very welcome!

Many thanks,

Woolers