[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


From: Dinesh Shah
Subject: Re: SMS on CDMA USB/PCMCIA Data Cards
Date: Sun, 23 Nov 2008 01:16:10 +0530

Hi Daniele,

Sorry for the top post. I am on stupid iPhone and don't have access to PC right now.

I will have to try gnokii with this USB card. So far I did not as I am not sure which driver to use. Should I try gnokii with AT driver?

Will post more details later.

Thanks for your help and pointer
With regards,
--Dinesh Shah :-)
Shah Micro System
Sent from iPhone!

On 22-Nov-08, at 22:27, "Daniele Forsi" <address@hidden> wrote:

2008/11/22 Dinesh Shah wrote:

I have Qualcomm Model 220 CDMA USB Data Card.

I tried many other + and $ extended commands but no success in reading
or sending SMS.

but did you try gnokii with it? which commands work and which don't?
copy error messages here

most or all commands that are supported also by GSM phones should
work, but sending SMS will probably fail with a CDMA phone

I am interested in using/adding support for these CDMA USB/PCMCIA
cards to gnokii

you need to find if they support the AT+CMGS command in "PDU mode"
(just try gnokii --sendsms, if they don't then you need to add "Text
mode" to gnokii, join #gnokii on freenode for advice) and if they need
the SMSC number (this might be operator specific)

Daniele Forsi

gnokii-users mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]