[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Problem with two nokia phones connected via USB
From: |
Krzysztof Śniadoch |
Subject: |
Problem with two nokia phones connected via USB |
Date: |
Fri, 1 Jun 2007 14:48:27 +0200 |
User-agent: |
KMail/1.9.5 |
Hi,
as in subject, I have problem with two nokia phones connected at the same
time :/ Ok, here's detailed situation:
I have two nokia 6021 connected via USB cable CA-42,
after plugging in the first CA-42 cable, kernel says:
usb 1-1: pl2303 converter now attached to ttyUSB1 (so everything is great,
kernel sees the cable)
and nokia 6021 attached to the cable responds correctly:
address@hidden:~> gnokii --config /gnokiirc_tel1 --identify
GNOKII Version 0.6.14
LOG: debug mask is 0x1
LOG: rlpdebug mask is 0x1
Config read from file /gnokiirc_tel1.
phone instance config:
model: 6021
port_device: /dev/ttyUSB0
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 310
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Connecting
Serial device: opening device /dev/ttyUSB0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
[Received Ack of type 1b, seq: 80]
....
the /gnokiirc_tel1 configuration is:
[global]
port = /dev/ttyUSB0
model = 6021
initlength = default
connection = serial
smsc_timeout = 31
so, gnokii via /dev/ttyUSB0 can communicate with my phone without any problems
And now, let's plug in the second cable ....
kernel reports:
usb 1-1: pl2303 converter now attached to ttyUSB1 (great, that's what we're
looking for)
but ...
address@hidden:~> gnokii --config /gnokiirc_tel2 --identify
GNOKII wersja 0.6.14
LOG: debug mask is 0x1
LOG: rlpdebug mask is 0x1
Config read from file /gnokiirc_tel2.
phone instance config:
model: 6021
port_device: /dev/ttyUSB1
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 310
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Connecting
Serial device: opening device /dev/ttyUSB1
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
....
and we see the final note:
Telephone interface init failed: Command timed out.
the /gnokiirc_tel2 configuration is:
[global]
port = /dev/ttyUSB1
model = 6021
initlength = default
connection = serial
smsc_timeout = 31
so, the gnokii can't communicate with the phone via /dev/ttyUSB1 :(
I'm out of idea what to try next, tried to change modules, cables, phones ...
everything, without success :/ communication via /dev/ttyUSB1 somehow can't
be established :(
I appreciate any help or even suggestion what might be wrong :/ I really need
to get that two phones working via USB :/
Regards,
Krzychu
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Problem with two nokia phones connected via USB,
Krzysztof Śniadoch <=