Re: gnokii installation problems (was: Trying to make gnokii work)

[Rodolfo Medina]

I'm sending it again, hoping for help:

> Rodolfo Medina <address@hidden> writes:
>
>> According to the howto at:
>>
>>  http://wiki.splitbrain.org/nokia_6630
>>
>> , I put in ~/.gnokiirc the following stuff:
>>
>> ------------------------------------------
>>  [global]
>>  port = /dev/ttyACM0
>>  model = AT-HW
>>  initlength = default
>>  connection = serial
>>  use_locking = yes
>>  serial_baudrate = 19200
>>  smsc_timeout = 10
>>
>>  [gnokiid]
>>  bindir = /usr/sbin/
>>  
>>  [connect_script]
>>  TELEPHONE = 12345678
>>
>>  [disconnect_script]
>>
>>  [logging]
>>  debug = off
>>  rlpdebug = off
>>  xdebug = off
>> ------------------------------------------
>>
>> , then connected my Nokia 6630 with its own USB cable to the PC
>> and started gnokii.
>> Some commands worked, some not:
>>
>>  $ gnokii --identify
>>  GNOKII Version 0.6.5
>>  IMEI         : 356657005008450
>>  Manufacturer : Nokia
>>  Model        : Nokia 6630
>>  Revision     : V 04wk47_m_v5
>>
>>  $ gnokii --getphonebook SM 1
>>  GNOKII Version 0.6.5
>>  Error: Unknown error - well better than nothing!!
>>
>>  $ gnokii --monitor
>>  GNOKII Version 0.6.5
>>  Entering monitor mode...
>>  RFLevel: 8
>>  Battery: 7
>>  Power Source: battery
>>  Network: vodafone (Italy), LAC: afe1, CellID: 30f4
>>  CALL0: IDLE
>>  CALL1: IDLE
>>  RFLevel: 8
>>  Battery: 7
>>  Power Source: battery
>>  [etc.]
>>
>>  $ gnokii --displayoutput
>>  GNOKII Version 0.6.5
>>  Lockfile /var/lock/LCK..ttyACM0 is stale. Overriding it..
>>  Error: Command called isn't implemented in model.
>>
>>  $ gnokii --getdatetime
>>  GNOKII Version 0.6.5
>>  Error: Command called isn't implemented in model.
>>
>>  $ gnokii --getsms SM 1
>>  GNOKII Version 0.6.5
>>  GetSMS SM 1 failed! (Command failed.)
>
>
>
> "Pawel Kot" <address@hidden> writes:
>
>> Certainly you miss recent version. What you use is more than 1 year old.
>> Please also refer to the documentation what information is needed for
>> us to help you with sloving problems.
>
>
>
> I downloaded gnokii-0.6.13.tar.gz and untarred it.
> The `./configure' step seemed to go well, but then the `make' step
> ended up with:
>
>  collect2: ld returned 1 exit status
>  make[1]: *** [gnokiid] Error 1
>  make[1]: Leaving directory `/home/rodolfo/tmp/gnokii-0.6.13/gnokiid'
>  make: *** [gnokiid] Error 2
>
> . Please any help?
> Thanks,
> Rodolfo