gnokii installation problems (was: Trying to make gnokii work)

[Rodolfo Medina]

Rodolfo Medina <address@hidden> writes:

> According to the howto at:
>
>  http://wiki.splitbrain.org/nokia_6630
>
> , I put in ~/.gnokiirc the following stuff:
>
> ------------------------------------------
>  [global]
>  port = /dev/ttyACM0
>  model = AT-HW
>  initlength = default
>  connection = serial
>  use_locking = yes
>  serial_baudrate = 19200
>  smsc_timeout = 10
>
>  [gnokiid]
>  bindir = /usr/sbin/
>  
>  [connect_script]
>  TELEPHONE = 12345678
>
>  [disconnect_script]
>
>  [logging]
>  debug = off
>  rlpdebug = off
>  xdebug = off
> ------------------------------------------
>
> , then connected my Nokia 6630 with its own USB cable to the PC
> and started gnokii.
> Some commands worked, some not:
>
>  $ gnokii --identify
>  GNOKII Version 0.6.5
>  IMEI         : 356657005008450
>  Manufacturer : Nokia
>  Model        : Nokia 6630
>  Revision     : V 04wk47_m_v5
>
>  $ gnokii --getphonebook SM 1
>  GNOKII Version 0.6.5
>  Error: Unknown error - well better than nothing!!
>
>  $ gnokii --monitor
>  GNOKII Version 0.6.5
>  Entering monitor mode...
>  RFLevel: 8
>  Battery: 7
>  Power Source: battery
>  Network: vodafone (Italy), LAC: afe1, CellID: 30f4
>  CALL0: IDLE
>  CALL1: IDLE
>  RFLevel: 8
>  Battery: 7
>  Power Source: battery
>  [etc.]
>
>  $ gnokii --displayoutput
>  GNOKII Version 0.6.5
>  Lockfile /var/lock/LCK..ttyACM0 is stale. Overriding it..
>  Error: Command called isn't implemented in model.
>
>  $ gnokii --getdatetime
>  GNOKII Version 0.6.5
>  Error: Command called isn't implemented in model.
>
>  $ gnokii --getsms SM 1
>  GNOKII Version 0.6.5
>  GetSMS SM 1 failed! (Command failed.)



"Pawel Kot" <address@hidden> writes:

> Certainly you miss recent version. What you use is more than 1 year old.
> Please also refer to the documentation what information is needed for
> us to help you with sloving problems.



I downloaded gnokii-0.6.13.tar.gz and untarred it.
The `./configure' step seemed to go well, but then the `make' step
ended up with:

 collect2: ld returned 1 exit status
 make[1]: *** [gnokiid] Error 1
 make[1]: Leaving directory `/home/rodolfo/tmp/gnokii-0.6.13/gnokiid'
 make: *** [gnokiid] Error 2

. Please any help?
Thanks,
Rodolfo