[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: smsd doesn't work with Siemens MC35?

From: Andrija Petrovic
Subject: RE: smsd doesn't work with Siemens MC35?
Date: Mon, 1 Nov 2004 11:02:53 +0100

Thanks for help,
I found a workaround:
issue an AT+CPMS "SM", "SM", "SM"
It takes about 35 seconds for the MC35 to fill up its ME memory with dummy
messages, so it will be full from now on.
Now all incoming messages (routed or not) will be stored in the SM memory,
and smsd will pick them up.

Best regards,

-----Original Message-----
From: address@hidden
[mailto:address@hidden Behalf Of
Florin Vancea
Sent: Friday, October 29, 2004 3:20 PM
To: Discussion forum for gnokii users.
Subject: Re: smsd doesn't work with Siemens MC35?

AFAIR, MC35 has an odd way of storing messages. It groups (read
concatenates) both internal storage and SIM storage into one single storage
type (either ME or SM - cannot remember which one).
I.e. if I have a 40-slot SIM, locations 1-40 of ME are actually from SIM and
locations 41-xx are real ME.

(it's been some time now since I had my hands on a MC35 and there's a
possibility that my memory fails me, so take the above with a grain of


----- Original Message -----
From: "Andrija Petrovic" <address@hidden>
To: <address@hidden>
Sent: Friday, October 29, 2004 3:31 PM
Subject: smsd doesn't work with Siemens MC35?

> Hi to all,
> I've got a Siemens MC35 terminal (GSM modem).
> It works fine with the gnokii program - I can identify the device, read
> delete SMSes, etc.
> However, smsd seems not to be communicating correctly with the MC35: it
> issues the AT+CPMS command to tell the modem to receive SMSes in the SM
> memory. However, all incoming SMSes get stored in the ME memory, so the
> doesn't see them. I get nothing in the inbox table.
> Everything works fine with a Nokia 7110.
> While smsd was running, i connected to the MC35 using the minicom program.
> got in the way of smsd<=>MC35 communication, and saw the AT+CPMS commands
> being issued, and the MC35 answering correctly. (Since minicom got in the
> way, smsd was reporting errors in GetSMSStatus). I simply cannot
> why the SMSes keep being stored in the ME memory when smsd asks for the SM
> memory.
> Help, anyone? I'd really appreciate it...
> Best regards,
> Andrija
> _______________________________________________
> gnokii-users mailing list
> address@hidden

gnokii-users mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]