[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Devel] FT 2.1.9: Minor fixits/Consolidated make procedure for OpenVMS
From: |
zinser |
Subject: |
[Devel] FT 2.1.9: Minor fixits/Consolidated make procedure for OpenVMS |
Date: |
Sun, 7 Nov 2004 18:37:52 +0100 |
Hello,
I checked out 2.1.9 recently and compiled it on OpenVMS. There are only
very few minor compile messages.
CC/define=(FT_CONFIG_OPTION_SYSTEM_ZLIB)/include=([--.include],[--.src.cache]) F
TCACHE.C
if ( family && --family->num_nodes <= 0 )
...................^
%CC-I-QUESTCOMPARE, In this statement, the unsigned expression "--family->num_no
des" is being compared with a relational operator to a constant whose value is n
ot greater than zero. This might not be what you intended.
at line number 50 in file DISK$USER:[ZINSER.TMP.FT2.SRC.CACHE]ftcglyph.c;1
--> Explicit cast to int
CC/define=(FT_CONFIG_OPTION_SYSTEM_ZLIB)/include=([--.include],[--.src.truetype]
) TRUETYPE.C
if ( ( error = FT_NEW_ARRAY( delta_xy, n_points ) ) )
.........^
%CC-W-UNDEFVARMOD, In this statement, the expression "(error=((error=(FT_Alloc(.
..)))!=0))" modifies the variable "error" more than once without an intervening
sequence point. This behavior is undefined.
at line number 1322 in file DISK$USER:[ZINSER.TMP.FT2.SRC.TRUETYPE]ttgxvar.c;1
--> error =... is already part of the FT_NEW_ARRAY macro, changed accordingly
Thanks bunches for your continued work on Freetype2.
I did further tweaks to the vms_make.com toplevel make procedure.
With this version all of the individual descrip.mms files in the
subdirectories are obsolete and can be removed from the source tree,
they will be created on the fly by vms_make.com
if building on a VMS system. Other small enhancements (like the abilitity to
link against the sharebable version of Zlib) have been added.
Since the build procedure for VMS has changed quite a bit over the last
couple of releases I did update docs/INSTALL.VMS to reflect the current
status.
Also included is a reworked vms_make.com for the ft2demos, which is working
together with the new Freetype2 build system.
Greetings, Martin
*** src/cache/ftcglyph.c.orig 2004-10-29 16:10:24.013086310 -0500
--- src/cache/ftcglyph.c 2004-10-29 16:16:56.846017412 -0500
***************
*** 47,53 ****
gnode->family = NULL;
! if ( family && --family->num_nodes <= 0 )
FTC_MruList_Remove( &FTC_GCACHE( cache )->families,
(FTC_MruNode)family );
}
--- 47,53 ----
gnode->family = NULL;
! if ( family && (int)(--family->num_nodes) <= 0 )
FTC_MruList_Remove( &FTC_GCACHE( cache )->families,
(FTC_MruNode)family );
}
*** src/truetype/ttgxvar.c.orig 2004-10-29 16:10:50.095165611 -0500
--- src/truetype/ttgxvar.c 2004-10-29 16:17:15.971140703 -0500
***************
*** 1319,1325 ****
return TT_Err_Invalid_Argument;
/* to be freed by the caller */
! if ( ( error = FT_NEW_ARRAY( delta_xy, n_points ) ) )
goto Exit;
*deltas = delta_xy;
--- 1319,1325 ----
return TT_Err_Invalid_Argument;
/* to be freed by the caller */
! if ( ( FT_NEW_ARRAY( delta_xy, n_points ) ) )
goto Exit;
*deltas = delta_xy;
*** docs/INSTALL.VMS.orig 2004-10-29 18:41:28.201737295 -0500
--- docs/INSTALL.VMS 2004-10-27 08:17:56.000000000 -0500
***************
*** 1,14 ****
How to build the freetype2 library on VMS
-----------------------------------------
! Just type one of the following depending on the type of external entries
! you want:
- mms
! or
! mms/macro=("COMP_FLAGS=/name=(as_is,short)")
The library is avalaible in the directory
--- 1,30 ----
How to build the freetype2 library on VMS
-----------------------------------------
! Building
! It is actually very straightforward to install the Freetype2 library.
! Just execute vms_make.com from the toplevel directory to build the library.
! This procedure currently accepts the following options:
! DEBUG
! Build the library with debug information and without optimization.
!
! lopts=<value>
! Options to pass to the link command e.g. lopts=/traceback
!
! ccopt=<value>
! Options to pass to the C compiler e.g. ccopt=/float=ieee
!
! In case you did download the demos, place them in a separate directory
! directly below the the toplevel directory of Freetype2 and follow the
! same instructions as above for the demos from there. The build
! process relies on this to figure the location of the Freetype2 include files.
!
!
! To rebuild the sources it is neccessary to have MMS/MMK installed on the
! system.
The library is avalaible in the directory
***************
*** 30,36 ****
Any problems can be reported to
! Jouk Jansen <address@hidden>
--- end of INSTALL.VMS ---
--- 46,53 ----
Any problems can be reported to
! Jouk Jansen <address@hidden> or
! Martin P.J. Zinser <address@hidden>
--- end of INSTALL.VMS ---
$! make Freetype2 under OpenVMS
$!
$! External libraries (like Freetype, XPM, etc.) are supported via the
$! config file VMSLIB.DAT. Please check the sample file, which is part of this
$! distribution, for the information you need to provide
$!
$! This procedure currently does support the following commandline options
$! in arbitrary order
$!
$! * DEBUG - Compile modules with /noopt/debug and link shareable image
$! with /debug
$! * LOPTS - Options to be passed to the link command
$! * CCOPT - Options to be passed to the C compiler
$!
$! In case of problems with the install you might contact me at
$! address@hidden(preferred) or
$! address@hidden (work)
$!
$! Make procedure history for Freetype2
$!
$!------------------------------------------------------------------------------
$! Version history
$! 0.01 20040401 First version to receive a number
$! 0.02 20041030 Add error handling, Freetype 2.1.9
$!
$ on error then goto err_exit
$ true = 1
$ false = 0
$ tmpnam = "temp_" + f$getjpi("","pid")
$ tt = tmpnam + ".txt"
$ tc = tmpnam + ".c"
$ th = tmpnam + ".h"
$ its_decc = false
$ its_vaxc = false
$ its_gnuc = false
$!
$! Setup variables holding "config" information
$!
$ Make = ""
$ ccopt = ""
$ lopts = ""
$ dnsrl = ""
$ aconf_in_file = "config.hin"
$ name = "Freetype2"
$ mapfile = name + ".map"
$ optfile = name + ".opt"
$ s_case = false
$ liblist = ""
$!
$ whoami = f$parse(f$enviornment("Procedure"),,,,"NO_CONCEAL")
$ mydef = F$parse(whoami,,,"DEVICE")
$ mydir = f$parse(whoami,,,"DIRECTORY") - "]["
$ myproc = f$parse(whoami,,,"Name") + f$parse(whoami,,,"type")
$!
$! Check for MMK/MMS
$!
$ If F$Search ("Sys$System:MMS.EXE") .nes. "" Then Make = "MMS"
$ If F$Type (MMK) .eqs. "STRING" Then Make = "MMK"
$!
$! Which command parameters were given
$!
$ gosub check_opts
$!
$! Create option file
$!
$ open/write optf 'optfile'
$!
$! Pull in external libraries
$!
$ create libs.opt
$ gosub check_create_vmslib
$!
$! Create objects
$!
$ if libdefs .nes. ""
$ then
$ ccopt = ccopt + "/define=(" + f$extract(0,f$length(libdefs)-1,libdefs) + ")"
$ endif
$!
$ if f$locate("AS_IS",f$edit(ccopt,"UPCASE")) .lt. f$length(ccopt) -
then s_case = true
$ gosub crea_mms
$!
$ 'Make' /macro=(comp_flags="''ccopt'")
$ purge/nolog [...]descrip.mms
$!
$! Add them to options
$!
$FLOOP:
$ file = f$edit(f$search("[...]*.obj"),"UPCASE")
$ if (file .nes. "")
$ then
$ if f$locate("DEMOS",file) .eqs. f$length(file) then write optf file
$ goto floop
$ endif
$!
$ close optf
$!
$!
$! Alpha gets a shareable image
$!
$ If f$getsyi("HW_MODEL") .gt. 1024
$ Then
$ write sys$output "Creating freetype2shr.exe"
$ call anal_obj_axp 'optfile' _link.opt
$ open/append optf 'optfile'
$ if s_case then WRITE optf "case_sensitive=YES"
$ close optf
$ LINK_/NODEB/SHARE=[.lib]freetype2shr.exe -
'optfile'/opt,libs.opt/opt,_link.opt/opt
$ endif
$!
$ exit
$!
$
$ERR_LIB:
$ write sys$output "Error reading config file vmslib.dat"
$ goto err_exit
$FT2_ERR:
$ write sys$output "Could not locate Freetype 2 include files"
$ goto err_exit
$ERR_EXIT:
$ set message/facil/ident/sever/text
$ close/nolog optf
$ close/nolog out
$ close/nolog libdata
$ close/nolog in
$ close/nolog atmp
$ close/nolog xtmp
$ write sys$output "Exiting..."
$ exit 2
$!
$!------------------------------------------------------------------------------
$!
$! If MMS/MMK are available dump out the descrip.mms if required
$!
$CREA_MMS:
$ write sys$output "Creating descrip.mms files ..."
$ write sys$output "... Main directory"
$ create descrip.mms
$ open/append out descrip.mms
$ copy sys$input: out
$ deck
#
# FreeType 2 build system -- top-level Makefile for OpenVMS
#
# Copyright 2001 by
# David Turner, Robert Wilhelm, and Werner Lemberg.
#
# This file is part of the FreeType project, and may only be used, modified,
# and distributed under the terms of the FreeType project license,
# LICENSE.TXT. By continuing to use, modify, or distribute this file you
# indicate that you have read the license and understand and accept it
# fully.
$ EOD
$ write out "CFLAGS = ", ccopt
$ copy sys$input: out
$ deck
all :
define freetype [--.include.freetype]
define psaux [-.psaux]
define autofit [-.autofit]
define autohint [-.autohint]
define base [-.base]
define cache [-.cache]
define cff [-.cff]
define cid [-.cid]
define pcf [-.pcf]
define psnames [-.psnames]
define raster [-.raster]
define sfnt [-.sfnt]
define smooth [-.smooth]
define truetype [-.truetype]
define type1 [-.type1]
define winfonts [-.winfonts]
if f$search("lib.dir") .eqs. "" then create/directory [.lib]
set default [.builds.vms]
$(MMS)$(MMSQUALIFIERS)
# set default [--.src.autofit]
# $(MMS)$(MMSQUALIFIERS)
set default [--.src.autohint]
$(MMS)$(MMSQUALIFIERS)
set default [-.base]
$(MMS)$(MMSQUALIFIERS)
set default [-.bdf]
$(MMS)$(MMSQUALIFIERS)
set default [-.cache]
$(MMS)$(MMSQUALIFIERS)
set default [-.cff]
$(MMS)$(MMSQUALIFIERS)
set default [-.cid]
$(MMS)$(MMSQUALIFIERS)
set default [-.gzip]
$(MMS)$(MMSQUALIFIERS)
set default [-.lzw]
$(MMS)$(MMSQUALIFIERS)
set default [-.pcf]
$(MMS)$(MMSQUALIFIERS)
set default [-.pfr]
$(MMS)$(MMSQUALIFIERS)
set default [-.psaux]
$(MMS)$(MMSQUALIFIERS)
set default [-.pshinter]
$(MMS)$(MMSQUALIFIERS)
set default [-.psnames]
$(MMS)$(MMSQUALIFIERS)
set default [-.raster]
$(MMS)$(MMSQUALIFIERS)
set default [-.sfnt]
$(MMS)$(MMSQUALIFIERS)
set default [-.smooth]
$(MMS)$(MMSQUALIFIERS)
set default [-.truetype]
$(MMS)$(MMSQUALIFIERS)
set default [-.type1]
$(MMS)$(MMSQUALIFIERS)
set default [-.type42]
$(MMS)$(MMSQUALIFIERS)
set default [-.winfonts]
$(MMS)$(MMSQUALIFIERS)
set default [--]
# EOF
$ eod
$ close out
$ write sys$output "... [.builds.vms] directory"
$ create [.builds.vms]descrip.mms
$ open/append out [.builds.vms]descrip.mms
$ copy sys$input: out
$ deck
#
# FreeType 2 system rules for VMS
#
# Copyright 2001 by
# David Turner, Robert Wilhelm, and Werner Lemberg.
#
# This file is part of the FreeType project, and may only be used, modified,
# and distributed under the terms of the FreeType project license,
# LICENSE.TXT. By continuing to use, modify, or distribute this file you
# indicate that you have read the license and understand and accept it
# fully.
CFLAGS=$(COMP_FLAGS)$(DEBUG)/include=([],[--.include],[--.src.base])
OBJS=ftsystem.obj
all : $(OBJS)
library/create [--.lib]freetype.olb $(OBJS)
ftsystem.obj : ftsystem.c ftconfig.h
# EOF
$ eod
$ close out
$ write sys$output "... [.src.autofit] directory"
$ create [.src.autofit]descrip.mms
$ open/append out [.src.autofit]descrip.mms
$ copy sys$input: out
$ deck
#
# FreeType 2 auto-fit module compilation rules for VMS
#
# Copyright 2002 by
# David Turner, Robert Wilhelm, and Werner Lemberg.
#
# This file is part of the FreeType project, and may only be used, modified,
# and distributed under the terms of the FreeType project license,
# LICENSE.TXT. By continuing to use, modify, or distribute this file you
# indicate that you have read the license and understand and accept it
# fully.
CFLAGS=$(COMP_FLAGS)$(DEBUG)/include=([--.include],[--.src.autofit])
OBJS=afangles.obj,afhints.obj,aflatin.obj
all : $(OBJS)
library [--.lib]freetype.olb $(OBJS)
# EOF
$ eod
$ close out
$ write sys$output "... [.src.autohint] directory"
$ create [.src.autohint]descrip.mms
$ open/append out [.src.autohint]descrip.mms
$ copy sys$input: out
$ deck
#
# FreeType 2 auto-hinter module compilation rules for VMS
#
# Copyright 2001, 2002 Catharon Productions Inc.
#
# This file is part of the Catharon Typography Project and shall only
# be used, modified, and distributed under the terms of the Catharon
# Open Source License that should come with this file under the name
# `CatharonLicense.txt'. By continuing to use, modify, or distribute
# this file you indicate that you have read the license and
# understand and accept it fully.
#
# Note that this license is compatible with the FreeType license.
CFLAGS=$(COMP_FLAGS)$(DEBUG)/incl=([--.include],[--.src.autohint])
OBJS=autohint.obj
all : $(OBJS)
library [--.lib]freetype.olb $(OBJS)
# EOF
$ eod
$ close out
$ write sys$output "... [.src.base] directory"
$ create [.src.base]descrip.mms
$ open/append out [.src.base]descrip.mms
$ copy sys$input: out
$ deck
#
# FreeType 2 base layer compilation rules for VMS
#
# Copyright 2001, 2003 by
# David Turner, Robert Wilhelm, and Werner Lemberg.
#
# This file is part of the FreeType project, and may only be used, modified,
# and distributed under the terms of the FreeType project license,
# LICENSE.TXT. By continuing to use, modify, or distribute this file you
# indicate that you have read the license and understand and accept it
# fully.
CFLAGS=$(COMP_FLAGS)$(DEBUG)/include=([--.builds.vms],[--.include],[--.src.base])
OBJS=ftbase.obj,ftinit.obj,ftglyph.obj,ftdebug.obj,ftbdf.obj,ftmm.obj,\
fttype1.obj,ftxf86.obj,ftpfr.obj,ftstroke.obj,ftwinfnt.obj
all : $(OBJS)
library [--.lib]freetype.olb $(OBJS)
# EOF
$ eod
$ close out
$ write sys$output "... [.src.bdf] directory"
$ create [.src.bdf]descrip.mms
$ open/append out [.src.bdf]descrip.mms
$ copy sys$input: out
$ deck
#
# FreeType 2 BDF driver compilation rules for VMS
#
# Copyright 2002 by
# David Turner, Robert Wilhelm, and Werner Lemberg.
#
# This file is part of the FreeType project, and may only be used, modified,
# and distributed under the terms of the FreeType project license,
# LICENSE.TXT. By continuing to use, modify, or distribute this file you
# indicate that you have read the license and understand and accept it
# fully.
CFLAGS=$(COMP_FLAGS)$(DEBUG)/include=([--.include],[--.src.bdf])
OBJS=bdf.obj
all : $(OBJS)
library [--.lib]freetype.olb $(OBJS)
# EOF
$ eod
$ close out
$ write sys$output "... [.src.cache] directory"
$ create [.src.cache]descrip.mms
$ open/append out [.src.cache]descrip.mms
$ copy sys$input: out
$ deck
#
# FreeType 2 Cache compilation rules for VMS
#
# Copyright 2001, 2002, 2003, 2004 by
# David Turner, Robert Wilhelm, and Werner Lemberg.
#
# This file is part of the FreeType project, and may only be used, modified,
# and distributed under the terms of the FreeType project license,
# LICENSE.TXT. By continuing to use, modify, or distribute this file you
# indicate that you have read the license and understand and accept it
# fully.
CFLAGS=$(COMP_FLAGS)$(DEBUG)/include=([--.include],[--.src.cache])
OBJS=ftcache.obj
all : $(OBJS)
library [--.lib]freetype.olb $(OBJS)
ftcache.obj : ftcache.c ftcbasic.c ftccache.c ftccmap.c ftcglyph.c ftcimage.c \
ftcmanag.c ftcmru.c ftcsbits.c
# EOF
$ eod
$ close out
$ write sys$output "... [.src.cff] directory"
$ create [.src.cff]descrip.mms
$ open/append out [.src.cff]descrip.mms
$ copy sys$input: out
$ deck
#
# FreeType 2 OpenType/CFF driver compilation rules for VMS
#
# Copyright 2001, 2002 by
# David Turner, Robert Wilhelm, and Werner Lemberg.
#
# This file is part of the FreeType project, and may only be used, modified,
# and distributed under the terms of the FreeType project license,
# LICENSE.TXT. By continuing to use, modify, or distribute this file you
# indicate that you have read the license and understand and accept it
# fully.
CFLAGS=$(COMP_FLAGS)$(DEBUG)/include=([--.include],[--.src.cff])
OBJS=cff.obj
all : $(OBJS)
library [--.lib]freetype.olb $(OBJS)
# EOF
$ eod
$ close out
$ write sys$output "... [.src.cid] directory"
$ create [.src.cid]descrip.mms
$ open/append out [.src.cid]descrip.mms
$ copy sys$input: out
$ deck
#
# FreeType 2 CID driver compilation rules for VMS
#
# Copyright 2001 by
# David Turner, Robert Wilhelm, and Werner Lemberg.
#
# This file is part of the FreeType project, and may only be used, modified,
# and distributed under the terms of the FreeType project license,
# LICENSE.TXT. By continuing to use, modify, or distribute this file you
# indicate that you have read the license and understand and accept it
# fully.
CFLAGS=$(COMP_FLAGS)$(DEBUG)/include=([--.include],[--.src.cid])
OBJS=type1cid.obj
all : $(OBJS)
library [--.lib]freetype.olb $(OBJS)
# EOF
$ eod
$ close out
$ write sys$output "... [.src.gzip] directory"
$ create [.src.gzip]descrip.mms
$ open/append out [.src.gzip]descrip.mms
$ copy sys$input: out
$ deck
#
# FreeType 2 GZip support compilation rules for VMS
#
# Copyright 2002 by
# David Turner, Robert Wilhelm, and Werner Lemberg.
#
# This file is part of the FreeType project, and may only be used, modified,
# and distributed under the terms of the FreeType project license,
# LICENSE.TXT. By continuing to use, modify, or distribute this file you
# indicate that you have read the license and understand and accept it
# fully.
$EOD
$ if libincs .nes. "" then write out "LIBINCS = ", libincs - ",", ","
$ write out "COMP_FLAGS = ", ccopt
$ copy sys$input: out
$ deck
CFLAGS=$(COMP_FLAGS)$(DEBUG)/include=($(LIBINCS)[--.include],[--.src.gzip])
OBJS=ftgzip.obj
all : $(OBJS)
library [--.lib]freetype.olb $(OBJS)
# EOF
$ eod
$ close out
$ write sys$output "... [.src.lzw] directory"
$ create [.src.lzw]descrip.mms
$ open/append out [.src.lzw]descrip.mms
$ copy sys$input: out
$ deck
#
# FreeType 2 LZW support compilation rules for VMS
#
# Copyright 2004 by
# David Turner, Robert Wilhelm, and Werner Lemberg.
#
# This file is part of the FreeType project, and may only be used, modified,
# and distributed under the terms of the FreeType project license,
# LICENSE.TXT. By continuing to use, modify, or distribute this file you
# indicate that you have read the license and understand and accept it
# fully.
$EOD
$ if libincs .nes. "" then write out "LIBINCS = ", libincs - ",", ","
$ write out "COMP_FLAGS = ", ccopt
$ copy sys$input: out
$ deck
CFLAGS=$(COMP_FLAGS)$(DEBUG)/include=($(LIBINCS)[--.include],[--.src.lzw])
OBJS=ftlzw.obj
all : $(OBJS)
library [--.lib]freetype.olb $(OBJS)
# EOF
$ eod
$ close out
$ write sys$output "... [.src.otlayout] directory"
$ create [.src.otlayout]descrip.mms
$ open/append out [.src.otlayout]descrip.mms
$ copy sys$input: out
$ deck
#
# FreeType 2 OT layout compilation rules for VMS
#
# Copyright 2004 by
# David Turner, Robert Wilhelm, and Werner Lemberg.
#
# This file is part of the FreeType project, and may only be used, modified,
# and distributed under the terms of the FreeType project license,
# LICENSE.TXT. By continuing to use, modify, or distribute this file you
# indicate that you have read the license and understand and accept it
# fully.
CFLAGS=$(COMP_FLAGS)$(DEBUG)/include=([--.include],[--.src.otlayout])
OBJS=otlbase.obj,otlcommn.obj,otlgdef.obj,otlgpos.obj,otlgsub.obj,\
otljstf.obj,otlparse.obj
all : $(OBJS)
library [--.lib]freetype.olb $(OBJS)
# EOF
$ eod
$ close out
$ write sys$output "... [.src.pcf] directory"
$ create [.src.pcf]descrip.mms
$ open/append out [.src.pcf]descrip.mms
$ copy sys$input: out
$ deck
#
# FreeType 2 pcf driver compilation rules for VMS
#
# Copyright (C) 2001, 2002 by
# Francesco Zappa Nardelli
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
# THE SOFTWARE.
CFLAGS=$(COMP_FLAGS)$(DEBUG)/include=([--.include],[--.src.pcf])
OBJS=pcf.obj
all : $(OBJS)
library [--.lib]freetype.olb $(OBJS)
# EOF
$ eod
$ close out
$ write sys$output "... [.src.pfr] directory"
$ create [.src.pfr]descrip.mms
$ open/append out [.src.pfr]descrip.mms
$ copy sys$input: out
$ deck
#
# FreeType 2 PFR driver compilation rules for VMS
#
# Copyright 2002 by
# David Turner, Robert Wilhelm, and Werner Lemberg.
#
# This file is part of the FreeType project, and may only be used, modified,
# and distributed under the terms of the FreeType project license,
# LICENSE.TXT. By continuing to use, modify, or distribute this file you
# indicate that you have read the license and understand and accept it
# fully.
CFLAGS=$(COMP_FLAGS)$(DEBUG)/include=([--.include],[--.src.pfr])
OBJS=pfr.obj
all : $(OBJS)
library [--.lib]freetype.olb $(OBJS)
# EOF
$ eod
$ close out
$ write sys$output "... [.src.psaux] directory"
$ create [.src.psaux]descrip.mms
$ open/append out [.src.psaux]descrip.mms
$ copy sys$input: out
$ deck
#
# FreeType 2 PSaux driver compilation rules for VMS
#
# Copyright 2001, 2002 by
# David Turner, Robert Wilhelm, and Werner Lemberg.
#
# This file is part of the FreeType project, and may only be used, modified,
# and distributed under the terms of the FreeType project license,
# LICENSE.TXT. By continuing to use, modify, or distribute this file you
# indicate that you have read the license and understand and accept it
# fully.
CFLAGS=$(COMP_FLAGS)$(DEBUG)/include=([--.include],[--.src.psaux])
OBJS=psaux.obj
all : $(OBJS)
library [--.lib]freetype.olb $(OBJS)
# EOF
$ eod
$ close out
$ write sys$output "... [.src.pshinter] directory"
$ create [.src.pshinter]descrip.mms
$ open/append out [.src.pshinter]descrip.mms
$ copy sys$input: out
$ deck
#
# FreeType 2 PSHinter driver compilation rules for OpenVMS
#
# Copyright 2001, 2002 by
# David Turner, Robert Wilhelm, and Werner Lemberg.
#
# This file is part of the FreeType project, and may only be used, modified,
# and distributed under the terms of the FreeType project license,
# LICENSE.TXT. By continuing to use, modify, or distribute this file you
# indicate that you have read the license and understand and accept it
# fully.
CFLAGS=$(COMP_FLAGS)$(DEBUG)/include=([--.include],[--.src.psnames])
OBJS=pshinter.obj
all : $(OBJS)
library [--.lib]freetype.olb $(OBJS)
# EOF
$ eod
$ close out
$ write sys$output "... [.src.psnames] directory"
$ create [.src.psnames]descrip.mms
$ open/append out [.src.psnames]descrip.mms
$ copy sys$input: out
$ deck
#
# FreeType 2 PSNames driver compilation rules for VMS
#
# Copyright 2001, 2002 by
# David Turner, Robert Wilhelm, and Werner Lemberg.
#
# This file is part of the FreeType project, and may only be used, modified,
# and distributed under the terms of the FreeType project license,
# LICENSE.TXT. By continuing to use, modify, or distribute this file you
# indicate that you have read the license and understand and accept it
# fully.
CFLAGS=$(COMP_FLAGS)$(DEBUG)/include=([--.include],[--.src.psnames])
OBJS=psnames.obj
all : $(OBJS)
library [--.lib]freetype.olb $(OBJS)
# EOF
$ eod
$ close out
$ write sys$output "... [.src.raster] directory"
$ create [.src.raster]descrip.mms
$ open/append out [.src.raster]descrip.mms
$ copy sys$input: out
$ deck
#
# FreeType 2 renderer module compilation rules for VMS
#
# Copyright 2001 by
# David Turner, Robert Wilhelm, and Werner Lemberg.
#
# This file is part of the FreeType project, and may only be used, modified,
# and distributed under the terms of the FreeType project license,
# LICENSE.TXT. By continuing to use, modify, or distribute this file you
# indicate that you have read the license and understand and accept it
# fully.
CFLAGS=$(COMP_FLAGS)$(DEBUG)/include=([--.include],[--.src.raster])
OBJS=raster.obj
all : $(OBJS)
library [--.lib]freetype.olb $(OBJS)
# EOF
$ eod
$ close out
$ write sys$output "... [.src.sfnt] directory"
$ create [.src.sfnt]descrip.mms
$ open/append out [.src.sfnt]descrip.mms
$ copy sys$input: out
$ deck
#
# FreeType 2 SFNT driver compilation rules for VMS
#
# Copyright 2001, 2002 by
# David Turner, Robert Wilhelm, and Werner Lemberg.
#
# This file is part of the FreeType project, and may only be used, modified,
# and distributed under the terms of the FreeType project license,
# LICENSE.TXT. By continuing to use, modify, or distribute this file you
# indicate that you have read the license and understand and accept it
# fully.
CFLAGS=$(COMP_FLAGS)$(DEBUG)/include=([--.include],[--.src.sfnt])
OBJS=sfnt.obj
all : $(OBJS)
library [--.lib]freetype.olb $(OBJS)
# EOF
$ eod
$ close out
$ write sys$output "... [.src.smooth] directory"
$ create [.src.smooth]descrip.mms
$ open/append out [.src.smooth]descrip.mms
$ copy sys$input: out
$ deck
#
# FreeType 2 smooth renderer module compilation rules for VMS
#
# Copyright 2001 by
# David Turner, Robert Wilhelm, and Werner Lemberg.
#
# This file is part of the FreeType project, and may only be used, modified,
# and distributed under the terms of the FreeType project license,
# LICENSE.TXT. By continuing to use, modify, or distribute this file you
# indicate that you have read the license and understand and accept it
# fully.
CFLAGS=$(COMP_FLAGS)$(DEBUG)/include=([--.include],[--.src.smooth])
OBJS=smooth.obj
all : $(OBJS)
library [--.lib]freetype.olb $(OBJS)
# EOF
$ eod
$ close out
$ write sys$output "... [.src.truetype] directory"
$ create [.src.truetype]descrip.mms
$ open/append out [.src.truetype]descrip.mms
$ copy sys$input: out
$ deck
#
# FreeType 2 TrueType driver compilation rules for VMS
#
# Copyright 2001, 2002 by
# David Turner, Robert Wilhelm, and Werner Lemberg.
#
# This file is part of the FreeType project, and may only be used, modified,
# and distributed under the terms of the FreeType project license,
# LICENSE.TXT. By continuing to use, modify, or distribute this file you
# indicate that you have read the license and understand and accept it
# fully.
CFLAGS=$(COMP_FLAGS)$(DEBUG)/include=([--.include],[--.src.truetype])
OBJS=truetype.obj
all : $(OBJS)
library [--.lib]freetype.olb $(OBJS)
# EOF
$ eod
$ close out
$ write sys$output "... [.src.type1] directory"
$ create [.src.type1]descrip.mms
$ open/append out [.src.type1]descrip.mms
$ copy sys$input: out
$ deck
#
# FreeType 2 Type1 driver compilation rules for VMS
#
# Copyright 1996-2000, 2002 by
# David Turner, Robert Wilhelm, and Werner Lemberg.
#
# This file is part of the FreeType project, and may only be used, modified,
# and distributed under the terms of the FreeType project license,
# LICENSE.TXT. By continuing to use, modify, or distribute this file you
# indicate that you have read the license and understand and accept it
# fully.
CFLAGS=$(COMP_FLAGS)$(DEBUG)/include=([--.include],[--.src.type1])
OBJS=type1.obj
all : $(OBJS)
library [--.lib]freetype.olb $(OBJS)
type1.obj : type1.c t1parse.c t1load.c t1objs.c t1driver.c t1gload.c t1afm.c
# EOF
$ eod
$ close out
$ write sys$output "... [.src.type42] directory"
$ create [.src.type42]descrip.mms
$ open/append out [.src.type42]descrip.mms
$ copy sys$input: out
$ deck
#
# FreeType 2 Type 42 driver compilation rules for VMS
#
# Copyright 2002 by
# David Turner, Robert Wilhelm, and Werner Lemberg.
#
# This file is part of the FreeType project, and may only be used, modified,
# and distributed under the terms of the FreeType project license,
# LICENSE.TXT. By continuing to use, modify, or distribute this file you
# indicate that you have read the license and understand and accept it
# fully.
CFLAGS=$(COMP_FLAGS)$(DEBUG)/include=([--.include],[--.src.type42])
OBJS=type42.obj
all : $(OBJS)
library [--.lib]freetype.olb $(OBJS)
# EOF
$ eod
$ close out
$ write sys$output "... [.src.winfonts] directory"
$ create [.src.winfonts]descrip.mms
$ open/append out [.src.winfonts]descrip.mms
$ copy sys$input: out
$ deck
#
# FreeType 2 Windows FNT/FON driver compilation rules for VMS
#
# Copyright 2001, 2002 by
# David Turner, Robert Wilhelm, and Werner Lemberg.
#
# This file is part of the FreeType project, and may only be used, modified,
# and distributed under the terms of the FreeType project license,
# LICENSE.TXT. By continuing to use, modify, or distribute this file you
# indicate that you have read the license and understand and accept it
# fully.
CFLAGS=$(COMP_FLAGS)$(DEBUG)/include=([--.include],[--.src.winfonts])
OBJS=winfnt.obj
all : $(OBJS)
library [--.lib]freetype.olb $(OBJS)
# EOF
$ eod
$ close out
$ return
$!------------------------------------------------------------------------------
$!
$! Check command line options and set symbols accordingly
$!
$ CHECK_OPTS:
$ i = 1
$ OPT_LOOP:
$ if i .lt. 9
$ then
$ cparm = f$edit(p'i',"upcase")
$ if cparm .eqs. "DEBUG"
$ then
$ ccopt = ccopt + "/noopt/deb"
$ lopts = lopts + "/deb"
$ endif
$ if f$locate("CCOPT=",cparm) .lt. f$length(cparm)
$ then
$ start = f$locate("=",cparm) + 1
$ len = f$length(cparm) - start
$ ccopt = ccopt + f$extract(start,len,cparm)
$ endif
$ if cparm .eqs. "LINK" then linkonly = true
$ if f$locate("LOPTS=",cparm) .lt. f$length(cparm)
$ then
$ start = f$locate("=",cparm) + 1
$ len = f$length(cparm) - start
$ lopts = lopts + f$extract(start,len,cparm)
$ endif
$ if f$locate("CC=",cparm) .lt. f$length(cparm)
$ then
$ start = f$locate("=",cparm) + 1
$ len = f$length(cparm) - start
$ cc_com = f$extract(start,len,cparm)
if (cc_com .nes. "DECC") .and. -
(cc_com .nes. "VAXC") .and. -
(cc_com .nes. "GNUC")
$ then
$ write sys$output "Unsupported compiler choice ''cc_com' ignored"
$ write sys$output "Use DECC, VAXC, or GNUC instead"
$ else
$ if cc_com .eqs. "DECC" then its_decc = true
$ if cc_com .eqs. "VAXC" then its_vaxc = true
$ if cc_com .eqs. "GNUC" then its_gnuc = true
$ endif
$ endif
$ if f$locate("MAKE=",cparm) .lt. f$length(cparm)
$ then
$ start = f$locate("=",cparm) + 1
$ len = f$length(cparm) - start
$ mmks = f$extract(start,len,cparm)
$ if (mmks .eqs. "MMK") .or. (mmks .eqs. "MMS")
$ then
$ make = mmks
$ else
$ write sys$output "Unsupported make choice ''mmks' ignored"
$ write sys$output "Use MMK or MMS instead"
$ endif
$ endif
$ i = i + 1
$ goto opt_loop
$ endif
$ return
$!------------------------------------------------------------------------------
$!
$! Take care of driver file with information about external libraries
$!
$! Version history
$! 0.01 20040220 First version to receive a number
$! 0.02 20040229 Echo current procedure name; use general error exit handler
$! Remove xpm hack -> Replaced by more general dnsrl handling
$CHECK_CREATE_VMSLIB:
$!
$ if f$search("VMSLIB.DAT") .eqs. ""
$ then
$ type/out=vmslib.dat sys$input
!
! This is a simple driver file with information used by vms_make.com to
! check if external libraries (like t1lib and freetype) are available on
! the system.
!
! Layout of the file:
!
! - Lines starting with ! are treated as comments
! - Elements in a data line are separated by # signs
! - The elements need to be listed in the following order
! 1.) Name of the Library (only used for informative messages
! from vms_make.com)
! 2.) Location where the object library can be found
! 3.) Location where the include files for the library can be found
! 4.) Include file used to verify library location
! 5.) CPP define to pass to the build to indicate availability of
! the library
!
! Example: The following lines show how definitions
! might look like. They are site specific and the locations of the
! library and include files need almost certainly to be changed.
!
! Location: All of the libaries can be found at the following addresses
!
! ZLIB: http://zinser.no-ip.info/vms/sw/zlib.htmlx
!
!ZLIB # pubbin:libzshr.exe # public$root:[util.libs.zlib] # zlib.h #
FT_CONFIG_OPTION_SYSTEM_ZLIB
$ write sys$output "New driver file vmslib.dat created."
$ write sys$output "Please customize libary locations for your site"
$ write sys$output "and afterwards re-execute ''myproc'"
$ goto err_exit
$ endif
$!
$! Init symbols used to hold CPP definitons and include path
$!
$ libdefs = ""
$ libincs = ""
$!
$! Open data file with location of libraries
$!
$ open/read/end=end_lib/err=err_lib libdata VMSLIB.DAT
$LIB_LOOP:
$ read/end=end_lib libdata libline
$ libline = f$edit(libline, "UNCOMMENT,COLLAPSE")
$ if libline .eqs. "" then goto LIB_LOOP ! Comment line
$ libname = f$edit(f$element(0,"#",libline),"UPCASE")
$ write sys$output "Processing ''libname' setup ..."
$ libloc = f$element(1,"#",libline)
$ libsrc = f$element(2,"#",libline)
$ testinc = f$element(3,"#",libline)
$ cppdef = f$element(4,"#",libline)
$ old_cpp = f$locate("=1",cppdef)
$ if old_cpp.lt.f$length(cppdef) then cppdef = f$extract(0,old_cpp,cppdef)
$ if f$search("''libloc'").eqs. ""
$ then
$ write sys$output "Can not find library ''libloc' - Skipping ''libname'"
$ goto LIB_LOOP
$ endif
$ libsrc_elem = 0
$ libsrc_found = false
$LIBSRC_LOOP:
$ libsrcdir = f$element(libsrc_elem,",",libsrc)
$ if (libsrcdir .eqs. ",") then goto END_LIBSRC
$ if f$search("''libsrcdir'''testinc'") .nes. "" then libsrc_found = true
$ libsrc_elem = libsrc_elem + 1
$ goto LIBSRC_LOOP
$END_LIBSRC:
$ if .not. libsrc_found
$ then
$ write sys$output "Can not find includes at ''libsrc' - Skipping ''libname'"
$ goto LIB_LOOP
$ endif
$ if (cppdef .nes. "") then libdefs = libdefs + cppdef + ","
$ libincs = libincs + "," + libsrc
$ lqual = "/lib"
$ libtype = f$edit(f$parse(libloc,,,"TYPE"),"UPCASE")
$ if f$locate("EXE",libtype) .lt. f$length(libtype) then lqual = "/share"
$ write optf libloc , lqual
$ if (f$trnlnm("topt") .nes. "") then write topt libloc , lqual
$!
$! Nasty hack to get the freetype includes to work
$!
$ ft2def = false
$ if ((libname .eqs. "FREETYPE") .and. -
(f$locate("FREETYPE2",cppdef) .lt. f$length(cppdef)))
$ then
$ if ((f$search("freetype:freetype.h") .nes. "") .and. -
(f$search("freetype:[internal]ftobjs.h") .nes. ""))
$ then
$ write sys$output "Will use local definition of freetype logical"
$ else
$ ft2elem = 0
$FT2_LOOP:
$ ft2srcdir = f$element(ft2elem,",",libsrc)
$ if f$search("''ft2srcdir'''testinc'") .nes. ""
$ then
$ if f$search("''ft2srcdir'internal.dir") .nes. ""
$ then
$ ft2dev = f$parse("''ft2srcdir'",,,"device","no_conceal")
$ ft2dir = f$parse("''ft2srcdir'",,,"directory","no_conceal")
$ ft2conc = f$locate("][",ft2dir)
$ ft2len = f$length(ft2dir)
$ if ft2conc .lt. ft2len
$ then
$ ft2dir = f$extract(0,ft2conc,ft2dir) + -
f$extract(ft2conc+2,ft2len-2,ft2dir)
$ endif
$ ft2dir = ft2dir - "]" + ".]"
$ define freetype 'ft2dev''ft2dir','ft2srcdir'
$ ft2def = true
$ else
$ goto ft2_err
$ endif
$ else
$ ft2elem = ft2elem + 1
$ goto ft2_loop
$ endif
$ endif
$ endif
$ goto LIB_LOOP
$END_LIB:
$ close libdata
$ return
$!------------------------------------------------------------------------------
$!
$! Analyze Object files for OpenVMS AXP to extract Procedure and Data
$! information to build a symbol vector for a shareable image
$! All the "brains" of this logic was suggested by Hartmut Becker
$! (address@hidden). All the bugs were introduced by me
$! (address@hidden), so if you do have problem reports please do not
$! bother Hartmut/HP, but get in touch with me
$!
$! Version history
$! 0.01 20040006 Skip over shareable images in option file
$!
$ ANAL_OBJ_AXP: Subroutine
$ V = 'F$Verify(0)
$ SAY := "WRITE_ SYS$OUTPUT"
$
$ IF F$SEARCH("''P1'") .EQS. ""
$ THEN
$ SAY "ANAL_OBJ_AXP-E-NOSUCHFILE: Error, inputfile ''p1' not available"
$ goto exit_aa
$ ENDIF
$ IF "''P2'" .EQS. ""
$ THEN
$ SAY "ANAL_OBJ_AXP: Error, no output file provided"
$ goto exit_aa
$ ENDIF
$
$ open/read in 'p1
$ create a.tmp
$ open/append atmp a.tmp
$ loop:
$ read/end=end_loop in line
$ if f$locate("/SHARE",f$edit(line,"upcase")) .lt. f$length(line)
$ then
$ write sys$output "ANAL_SKP_SHR-i-skipshare, ''line'"
$ goto loop
$ endif
$ f= f$search(line)
$ if f .eqs. ""
$ then
$ write sys$output "ANAL_OBJ_AXP-w-nosuchfile, ''line'"
$ goto loop
$ endif
$ def/user sys$output nl:
$ def/user sys$error nl:
$ anal/obj/gsd 'f /out=x.tmp
$ open/read xtmp x.tmp
$ XLOOP:
$ read/end=end_xloop xtmp xline
$ xline = f$edit(xline,"compress")
$ write atmp xline
$ goto xloop
$ END_XLOOP:
$ close xtmp
$ goto loop
$ end_loop:
$ close in
$ close atmp
$ if f$search("a.tmp") .eqs. "" -
then $ exit
$ ! all global definitions
$ search a.tmp "symbol:","EGSY$V_DEF 1","EGSY$V_NORM 1"/out=b.tmp
$ ! all procedures
$ search b.tmp "EGSY$V_NORM 1"/wind=(0,1) /out=c.tmp
$ search c.tmp "symbol:"/out=d.tmp
$ def/user sys$output nl:
$ edito/edt/command=sys$input d.tmp
sub/symbol: "/symbol_vector=(/whole
sub/"/=procedure)/whole
exit
$ ! all data
$ search b.tmp "EGSY$V_DEF 1"/wind=(0,1) /out=e.tmp
$ search e.tmp "symbol:"/out=f.tmp
$ def/user sys$output nl:
$ edito/edt/command=sys$input f.tmp
sub/symbol: "/symbol_vector=(/whole
sub/"/=data)/whole
exit
$ sort/nodupl d.tmp,f.tmp 'p2'
$ delete a.tmp;*,b.tmp;*,c.tmp;*,d.tmp;*,e.tmp;*,f.tmp;*
$ if f$search("x.tmp") .nes. "" -
then $ delete x.tmp;*
$!
$ EXIT_AA:
$ if V then set verify
$ endsubroutine
$!---------------vms_make.com for Freetype2 demos ------------------------------
$! make Freetype2 under OpenVMS
$!
$! In case of problems with the build you might want to contact me at
$! address@hidden (preferred) or
$! address@hidden (Work)
$!
$!------------------------------------------------------------------------------
$!
$ on error then goto err_exit
$!
$! Just some general constants
$!
$ Make = ""
$ true = 1
$ false = 0
$!
$! Setup variables holding "config" information
$!
$ name = "FT2demos"
$ optfile = name + ".opt"
$ ccopt = ""
$ lopts = ""
$!
$! Check for MMK/MMS
$!
$ If F$Search ("Sys$System:MMS.EXE") .nes. "" Then Make = "MMS"
$ If F$Type (MMK) .eqs. "STRING" Then Make = "MMK"
$!
$! Which command parameters were given
$!
$ gosub check_opts
$!
$! Create option file
$!
$ open/write optf 'optfile'
$ If f$getsyi("HW_MODEL") .gt. 1024
$ Then
$ write optf "[-.lib]freetype2shr.exe/share"
$ else
$ write optf "[-.lib]freetype.olb/lib"
$ endif
$ gosub check_create_vmslib
$ write optf "sys$share:decw$xlibshr.exe/share"
$ close optf
$!
$ gosub crea_mms
$ 'Make'
$ purge/nolog descrip.mms
$!
$ exit
$!
$ERR_LIB:
$ write sys$output "Error reading config file [-]vmslib.dat"
$ goto err_exit
$FT2_ERR:
$ write sys$output "Could not locate Freetype 2 include files"
$ goto err_exit
$ERR_EXIT:
$ set message/facil/ident/sever/text
$ close/nolog optf
$ close/nolog out
$ close/nolog libdata
$ write sys$output "Exiting..."
$ exit 2
$!------------------------------------------------------------------------------
$!
$! If MMS/MMK are available dump out the descrip.mms if required
$!
$CREA_MMS:
$ write sys$output "Creating descrip.mms..."
$ create descrip.mms
$ open/append out descrip.mms
$ copy sys$input: out
$ deck
# This file is part of the FreeType project.
#
# DESCRIP.MMS: Make file for OpenVMS using MMS or MMK
# Created by Martin P.J. Zinser
# (address@hidden (preferred) or address@hidden (work))
$EOD
$ write out "CCOPT = ", ccopt
$ write out "LOPTS = ", lopts
$ copy sys$input: out
$ deck
.FIRST
define freetype [-.include.freetype]
CC = cc
# location of src for Test programs
SRCDIR = [.src]
GRAPHSRC = [.graph]
GRX11SRC = [.graph.x11]
OBJDIR = [.obj]
# include paths
INCLUDES = /include=([-.include],[.graph])
GRAPHOBJ = $(OBJDIR)grblit.obj, \
$(OBJDIR)grobjs.obj, \
$(OBJDIR)grfont.obj, \
$(OBJDIR)grinit.obj, \
$(OBJDIR)grdevice.obj,\
$(OBJDIR)grx11.obj, \
$(OBJDIR)gblender.obj, \
$(OBJDIR)gblblit.obj
# C flags
CFLAGS = $(CCOPT)$(INCLUDES)/obj=$(OBJDIR)
ALL : ftchkwd.exe ftdump.exe ftlint.exe ftmemchk.exe ftmulti.exe ftview.exe \
ftstring.exe fttimer.exe ftbench.exe testname.exe
ftbench.exe : $(OBJDIR)ftbench.obj,$(OBJDIR)common.obj
link $(LOPTS) $(OBJDIR)ftbench.obj,$(OBJDIR)common.obj,-
[]ft2demos.opt/opt
ftchkwd.exe : $(OBJDIR)ftchkwd.obj,$(OBJDIR)common.obj
link $(LOPTS) $(OBJDIR)ftchkwd.obj,$(OBJDIR)common.obj,-
[]ft2demos.opt/opt
ftdump.exe : $(OBJDIR)ftdump.obj,$(OBJDIR)common.obj
link $(LOPTS) $(OBJDIR)ftdump.obj,common.obj,[]ft2demos.opt/opt
ftlint.exe : $(OBJDIR)ftlint.obj
link $(LOPTS) $(OBJDIR)ftlint.obj,[]ft2demos.opt/opt
ftmemchk.exe : $(OBJDIR)ftmemchk.obj
link $(LOPTS) $(OBJDIR)ftmemchk.obj,[]ft2demos.opt/opt
ftmulti.exe : $(OBJDIR)ftmulti.obj,$(OBJDIR)common.obj,$(GRAPHOBJ)
link $(LOPTS)
$(OBJDIR)ftmulti.obj,common.obj,$(GRAPHOBJ),[]ft2demos.opt/opt
ftview.exe : $(OBJDIR)ftview.obj,$(OBJDIR)common.obj,$(GRAPHOBJ)
link $(LOPTS)
$(OBJDIR)ftview.obj,common.obj,$(GRAPHOBJ),[]ft2demos.opt/opt
ftstring.exe : $(OBJDIR)ftstring.obj,$(OBJDIR)common.obj,$(GRAPHOBJ)
link $(LOPTS)
$(OBJDIR)ftstring.obj,common.obj,$(GRAPHOBJ),[]ft2demos.opt/opt
fttimer.exe : $(OBJDIR)fttimer.obj
link $(LOPTS) $(OBJDIR)fttimer.obj,[]ft2demos.opt/opt
testname.exe : $(OBJDIR)testname.obj
link $(LOPTS) $(OBJDIR)testname.obj,[]ft2demos.opt/opt
$(OBJDIR)common.obj : $(SRCDIR)common.c , $(SRCDIR)common.h
$(OBJDIR)ftbench.obj : $(SRCDIR)ftbench.c
$(OBJDIR)ftchkwd.obj : $(SRCDIR)ftchkwd.c
$(OBJDIR)ftlint.obj : $(SRCDIR)ftlint.c
$(OBJDIR)ftmemchk.obj : $(SRCDIR)ftmemchk.c
$(OBJDIR)ftdump.obj : $(SRCDIR)ftdump.c
$(OBJDIR)testname.obj : $(SRCDIR)testname.c
$(OBJDIR)ftview.obj : $(SRCDIR)ftview.c
$(OBJDIR)grblit.obj : $(GRAPHSRC)grblit.c
$(OBJDIR)grobjs.obj : $(GRAPHSRC)grobjs.c
$(OBJDIR)grfont.obj : $(GRAPHSRC)grfont.c
$(OBJDIR)gblender.obj : $(GRAPHSRC)gblender.c
$(OBJDIR)gblblit.obj : $(GRAPHSRC)gblblit.c
$(OBJDIR)grinit.obj : $(GRAPHSRC)grinit.c
set def $(GRAPHSRC)
$(CC)$(CCOPT)/include=([.x11],[])/define=(DEVICE_X11)/obj=[-.obj]
grinit.c
set def [-]
$(OBJDIR)grx11.obj : $(GRX11SRC)grx11.c
set def $(GRX11SRC)
$(CC)$(CCOPT)/obj=[--.obj]/include=([-]) grx11.c
set def [--]
$(OBJDIR)grdevice.obj : $(GRAPHSRC)grdevice.c
$(OBJDIR)ftmulti.obj : $(SRCDIR)ftmulti.c
$(OBJDIR)ftstring.obj : $(SRCDIR)ftstring.c
$(OBJDIR)fttimer.obj : $(SRCDIR)fttimer.c
CLEAN :
delete $(OBJDIR)*.obj;*,[]ft2demos.opt;*
# EOF
$ eod
$ close out
$ return
$!------------------------------------------------------------------------------
$!
$! Check commandline options and set symbols accordingly
$!
$ CHECK_OPTS:
$ i = 1
$ OPT_LOOP:
$ if i .lt. 9
$ then
$ cparm = f$edit(p'i',"upcase")
$ if cparm .eqs. "DEBUG"
$ then
$ ccopt = ccopt + "/noopt/deb"
$ lopts = lopts + "/deb"
$ endif
$! if cparm .eqs. "link $(LOPTS)" then link only = true
$ if f$locate("LOPTS",cparm) .lt. f$length(cparm)
$ then
$ start = f$locate("=",cparm) + 1
$ len = f$length(cparm) - start
$ lopts = lopts + f$extract(start,len,cparm)
$ endif
$ if f$locate("CCOPT",cparm) .lt. f$length(cparm)
$ then
$ start = f$locate("=",cparm) + 1
$ len = f$length(cparm) - start
$ ccopt = ccopt + f$extract(start,len,cparm)
$ endif
$ i = i + 1
$ goto opt_loop
$ endif
$ return
$!------------------------------------------------------------------------------
$!
$! Take care of driver file with information about external libraries
$!
$! Version history
$! 0.01 20040220 First version to receive a number
$! 0.02 20040229 Echo current procedure name; use general error exit handler
$! Remove xpm hack -> Replaced by more general dnsrl handling
$! ---> Attention slightly changed version to take into account special
$! Situation for Freetype2 demos
$CHECK_CREATE_VMSLIB:
$!
$ if f$search("[-]VMSLIB.DAT") .eqs. ""
$ then
$ write sys$output "Freetype2 driver file [-]vmslib.dat not found."
$ write sys$output "Either Ft2demos have been installed in the wrong location"
$ write sys$output "or Freetype2 has not yet been configured."
$ write sys$output "Exiting..."
$ goto err_exit
$ endif
$!
$! Init symbols used to hold CPP definitons and include path
$!
$ libdefs = ""
$ libincs = ""
$!
$! Open data file with location of libraries
$!
$ open/read/end=end_lib/err=err_lib libdata [-]VMSLIB.DAT
$LIB_LOOP:
$ read/end=end_lib libdata libline
$ libline = f$edit(libline, "UNCOMMENT,COLLAPSE")
$ if libline .eqs. "" then goto LIB_LOOP ! Comment line
$ libname = f$edit(f$element(0,"#",libline),"UPCASE")
$ write sys$output "Processing ''libname' setup ..."
$ libloc = f$element(1,"#",libline)
$ libsrc = f$element(2,"#",libline)
$ testinc = f$element(3,"#",libline)
$ cppdef = f$element(4,"#",libline)
$ old_cpp = f$locate("=1",cppdef)
$ if old_cpp.lt.f$length(cppdef) then cppdef = f$extract(0,old_cpp,cppdef)
$ if f$search("''libloc'").eqs. ""
$ then
$ write sys$output "Can not find library ''libloc' - Skipping ''libname'"
$ goto LIB_LOOP
$ endif
$ libsrc_elem = 0
$ libsrc_found = false
$LIBSRC_LOOP:
$ libsrcdir = f$element(libsrc_elem,",",libsrc)
$ if (libsrcdir .eqs. ",") then goto END_LIBSRC
$ if f$search("''libsrcdir'''testinc'") .nes. "" then libsrc_found = true
$ libsrc_elem = libsrc_elem + 1
$ goto LIBSRC_LOOP
$END_LIBSRC:
$ if .not. libsrc_found
$ then
$ write sys$output "Can not find includes at ''libsrc' - Skipping ''libname'"
$ goto LIB_LOOP
$ endif
$ if (cppdef .nes. "") then libdefs = libdefs + cppdef + ","
$ libincs = libincs + "," + libsrc
$ lqual = "/lib"
$ libtype = f$edit(f$parse(libloc,,,"TYPE"),"UPCASE")
$ if f$locate("EXE",libtype) .lt. f$length(libtype) then lqual = "/share"
$ write optf libloc , lqual
$ if (f$trnlnm("topt") .nes. "") then write topt libloc , lqual
$!
$! Nasty hack to get the freetype includes to work
$!
$ ft2def = false
$ if ((libname .eqs. "FREETYPE") .and. -
(f$locate("FREETYPE2",cppdef) .lt. f$length(cppdef)))
$ then
$ if ((f$search("freetype:freetype.h") .nes. "") .and. -
(f$search("freetype:[internal]ftobjs.h") .nes. ""))
$ then
$ write sys$output "Will use local definition of freetype logical"
$ else
$ ft2elem = 0
$FT2_LOOP:
$ ft2srcdir = f$element(ft2elem,",",libsrc)
$ if f$search("''ft2srcdir'''testinc'") .nes. ""
$ then
$ if f$search("''ft2srcdir'internal.dir") .nes. ""
$ then
$ ft2dev = f$parse("''ft2srcdir'",,,"device","no_conceal")
$ ft2dir = f$parse("''ft2srcdir'",,,"directory","no_conceal")
$ ft2conc = f$locate("][",ft2dir)
$ ft2len = f$length(ft2dir)
$ if ft2conc .lt. ft2len
$ then
$ ft2dir = f$extract(0,ft2conc,ft2dir) + -
f$extract(ft2conc+2,ft2len-2,ft2dir)
$ endif
$ ft2dir = ft2dir - "]" + ".]"
$ define freetype 'ft2dev''ft2dir','ft2srcdir'
$ ft2def = true
$ else
$ goto ft2_err
$ endif
$ else
$ ft2elem = ft2elem + 1
$ goto ft2_loop
$ endif
$ endif
$ endif
$ goto LIB_LOOP
$END_LIB:
$ close libdata
$ return
Dr. Martin P.J. Zinser Email: address@hidden
2512 Victor Avenue Phone: +1 312 523 6659
Glenview, IL, 60025 FAX: +1 312 408 3071
USA
- [Devel] FT 2.1.9: Minor fixits/Consolidated make procedure for OpenVMS,
zinser <=