[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Devel] using PFR fonts with freetype2 from CVS
From: |
Detlef Würkner |
Subject: |
Re: [Devel] using PFR fonts with freetype2 from CVS |
Date: |
Thu, 20 Jun 2002 16:54:08 +0200 |
address@hidden (Sven Neumann) wrote:
> However one of the fonts I've tested places the stem of the 'i'
> character way off. It appears one pixel to the left and way up while
> the 'i'-point seems to appear at the correct position. The font in
> question can be downloaded here:
>
> http://www.truedoc.com/pfrs/Zurich.pfr
Just want to confirm that the problem is still there even with the
current PFR driver. It appears with the first font (face index 0) of
Zurich.pfr and also with
Exotc350DmBd.pfr
ZurichBlkEx.pfr
ZurichXCn.pfr
Btw, the inverted exclamation mark (¡) can be used for comparisons in
the Zurich fonts, it looks like the i is expected to do. And some other
'i' variants are also affected: For ÍÎÌíîì (upper and lower i with
acute, circumflex, grave) the 'i' is positioned left of the accent
instead of just below of it. A composite problem?
Ciao, Detlef
--
_ // address@hidden
\X/ Detlef Wuerkner, Langgoens/Germany
- Re: [Devel] using PFR fonts with freetype2 from CVS,
Detlef Würkner <=