[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [USRP-users] daughter board coherency on N310

From: Rob Kossler
Subject: Re: [USRP-users] daughter board coherency on N310
Date: Fri, 20 Nov 2020 10:49:40 -0600

Hi Cameron,
Yes, this is possible.  I'm not too familiar with gnuradio but in the end you need to use a "timed start" to the receive streams.  

On Fri, Nov 20, 2020 at 7:34 AM Cameron Matson via USRP-users <usrp-users@lists.ettus.com> wrote:
Hello all,

I'm trying to implement a MIMO receiver using the 4 RF chains of the N310.  To test the timing of the system, at the transmitter I'm simply sending a short pulse from one transmit antenna of one USRP.  At the receiver it looks like there is up to a ~20 ms delay/offset between the pairs of antennas 0/1 and 2/3 and that this delay changes each time I restart my GNURadio flowgraph.  I can see the delay both in GNURadio GUI Time Sink and in actual samples that I write to file.  I've tried various pulse widths and sampling rates at both the tx and rx, and it seems invariant to these.

I'd really like to be able to synchronize the 4 RF chains in time simultaneously.  Is that possible?

Cameron Matson
USRP-users mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]