[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] UHD last in git unable to recv
From: |
Josh Blum |
Subject: |
Re: [Discuss-gnuradio] UHD last in git unable to recv |
Date: |
Mon, 20 Jun 2011 08:06:49 -0700 |
User-agent: |
Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.17) Gecko/20110516 Lightning/1.0b2 Thunderbird/3.1.10 |
Its fine, just see the --help before running. And thanks for the patch.
-Josh
On 06/20/2011 05:29 AM, Gaetano Mendola wrote:
> Hi all,
> I got last version from git compiled and installed, installed the
> images UHD-images-003.001.002.tar.gz
> as well. The device is a USRP N210 with a WBX.
>
> It seems now the device is unable to receive any data, the
> benchmark_rate example gives
>
> ./benchmark_rate
> linux; GNU C++ version 4.4.3; Boost_104000; UHD_003.001.002-bc87971
>
>
> Creating the usrp device with: ...
> -- Opening a USRP2/N-Series device...
> -- Current recv frame size: 1472 bytes
> -- Current send frame size: 1472 bytes
> -- mboard0 is MIMO master
> Using Device: Single USRP:
> Device: USRP2/N Series device
> Mboard 0: USRP-N210 mboard
> RX Channel: 0
> RX DSP: USRP-N210 ddc0
> RX Dboard: USRP-N210 dboard (rx unit)
> RX Subdev: WBX RX + Simple GDB
> TX Channel: 0
> TX DSP: USRP-N210 duc0
> TX Dboard: USRP-N210 dboard (tx unit)
> TX Subdev: WBX TX + Simple GDB
>
>
> Benchmark rate summary:
> Num received samples: 0
> Num dropped samples: 0
> Num overflows detected: 0
> Num transmitted samples: 0
> Num sequence errors: 0
> Num underflows detected: 0
>
>
> Done!
>
>
> I have also noticed that the led "B" now is on, is it normal ?
>
> Regards
> Gaetano
>