Re: [Discuss-gnuradio] Issues in burning UHD images into SD card.

[sumitstop]

Ohh.. thanks Josh I wil post it there then.

Josh Blum-2 wrote:
> 
> Sorry dude, wrong mailing list:
> http://code.ettus.com/redmine/ettus/projects/uhd/wiki#Help-and-Support
> 
> -Josh
> 
> On 05/09/2011 10:48 PM, sumitstop wrote:
>> 
>> Hi,
>> I unluckily formatted the SD card given with USRP2 package.
>> Now I am not knowing where to start.I have to use Matlab with USRP2.
>> I went through the forums and I found that through UHD one can make the
>> USRP2 interact with GNURadio,Labview,Matlab.For this UHD needed to be
>> burnt
>> on the SD card.
>> 
>> Hence i downloaded it through the following link
>> 
>> git clone git://code.ettus.com/ettus/uhd.git
>> 
>> It said "initialized empty Git repository in /home/cogwsn/uhd/.git/"
>> 
>> After that i checked that folder named uhd.
>> 
>> There were four sub-folders in side that folder named
>> firmware,fpga,host,imaes and a file also named fix-copyright-years.
>> 
>> My question is that shall I burn all of them to the SD card using the
>> command 
>> 
>> sudo <install-path>/share/uhd/utils/usrp2_card_burner_gui.py
>> 
>> 1.If no then what has to be burnt and how.
>> 
>> 2.If yes then I actually tried the above command but the GUI which popped
>> out gives option to select the firmware and fpga images only.
>> 
>> I already have downloaded the firmware and fpga images from the link 
>> 
>> http://code.ettus.com/redmine/ettus/projects/public/wiki/U2binaries
>> 
>> The fpga image file is --->>>>Raw Ethernet   rel-20100603    d488c6b2        
>> June
>> 3,
>> 2010  
>> and the firmware image file is --- >>>> Raw Ethernet, with XCVR2450  
>> v3.3.1git    Jun 08, 2010    
>> 
>> I have XCVR2450 daughter board with me and I am using ubuntu10.10.
>> I have landed in a total confusion.Wish i could havn't formatted the card
>> :(
>> 
>> I will appreciate very much if someone will tell me a step by step
>> approach.
>> (I am a windows guy and this ubuntu is giving a lot of pain :-(    )
>> 
>> 
>> I am desperate to run my code and transmit data through USRP2 but since 2
>> days I am not even able to make the device working.
>>  :-(
>> 
>> -----
>> Sumit Kr.
>> Research Assistant
>> Communication Research center
>> IIIT Hyderabad
>> India
> 
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> 
> 


-----
Sumit Kr.
Research Assistant
Communication Research center
IIIT Hyderabad
India
-- 
View this message in context: 
http://old.nabble.com/Issues-in-burning-UHD-images-into-SD-card.-tp31582897p31583098.html
Sent from the GnuRadio mailing list archive at Nabble.com.