Re: [Discuss-gnuradio] USRP2 Ethernet link Issues

[Josh Blum]

On 03/31/2011 09:29 AM, Praveen Vikram wrote:
> Sorry for the late reply, just got into my lab.
> 
> When I start the USRP2, This is what happens:
> F lights up first,
> then all the LEDS flash
> and D and F stay on.
> 
> I tried burning txrx_raw_eth_20100608.bin/u2_rev3-20100603.bin as my fw/fpga
> on the SD card and even that does the same thing.
> I'am using the Kingston 2gb SD card I got with the USRP2.
> 

This may help: when using the images found here:
http://code.ettus.com/redmine/ettus/projects/uhd/wiki

"""
This is how the LEDs should light up after power cycle when using the
UHD images on your USRP2. Notice at the very end of the video how the
ethernet link light comes on (very faint LED on the left).
"""
http://www.youtube.com/watch?v=REDK7M-83WQ

Hope that helps,
-Josh