Re: [Discuss-gnuradio] ( An attempt ) to run GNURadio on WinTV : )

[Hew How Chee]

Hi Jim,

The card I use last time is PV-TV304P+ (REV .2B) with FMRC (FM and Remote Control) . The chipset used is CX23881. The card from newegg.com is using CX23883. Can't tell it is compatible or not. The data I got is 8 bit unsigned. Didn't try out 10 bit since I was quite dissapointed by the noise in the 8 bit digitized signal. Nevertheless, it is still possbile to digitize the 10.7 MHz FM IF with hardware mods.

Note that the source code at http://www.geocities.com/how_chee/cx23881.htm can't compile and run in Linux kernel 2.6 and is not hooked up to GNURadio. It was developed using Knoppix Live CD 3.4 running kernel 2.4.x.

Best regards,
Hew


Jim Perkins <address@hidden> wrote:
>         Hew,
>  Aren't you the guy how figured out
>  how to get the ADC data from the CX23881 card into the PC?  I found your website http://www.geocities.com/how_chee/cx23881.htm and looked at the data.  I think I'm going to get one of these cards to play with.  What model number do you have?  I can find PROLINK PV-TV304P+FMRC for $30 at newegg.com.  The Prolink website says it's 8 or 10 bits so I'm wondering if that is the right card.
>  -Jim
>

---

Any questions?  Get answers on any topic at Yahoo! Answers. Try it now.