[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] usrper fails in usb_claim_interface
From: |
Larry Doolittle |
Subject: |
[Discuss-gnuradio] usrper fails in usb_claim_interface |
Date: |
Tue, 5 Apr 2005 12:03:00 -0700 |
User-agent: |
Mutt/1.5.8i |
Hi -
I have an Avnet Virtex 4 evaluation board, intended for
projects similar in concept to GNU Radio. It uses the
same CY7C68013 chip as USRP.
I used USRP as a software reference design, and started
splicing in some code of my own. I think that part is
in good shape, after coming up to speed on SDCC etc.
When I go to download my .ihx file, usrper says:
# usrper -x load_firmware ${FOO}/usrp_main.ihx
lt-usrper: found unconfigured FX2; needs firmware.
usrp_open_interface:usb_claim_interface: failed interface 0
could not claim interface 0: Device or resource busy
lt-usrper: failed to open_cmd_interface
#
I am running this as root, to avoid possible permissions
problems. The Linux kernel is 2.6.10-9-amd64-k8, base
distribution is debian sid.
The curious thing is that both fxload and fx2_programmer
seem to work; with fxload, I have even confirmed (by watching
I/O pins with a scope) that my .ihx file loads and runs.
strace shows a non-surprising:
open("/proc/bus/usb/005/005", O_RDWR) = 3
ioctl(3, USBDEVFS_SETCONFIGURATION, 0x7fbffffb2c) = 0
ioctl(3, USBDEVFS_CLAIMINTERFACE, 0x7fbffffb2c) = -1 EBUSY (Device or resource
busy)
write(2,
"usrp_open_interface:usb_claim_in"...,60usrp_open_interface:usb_claim_interface:
failed interface 0
) = 60
I found http://comsec.com/wiki?UsrpInstall, where this message
is listed, and it says to use USB 2.0 instead of USB 1.1.
If I read my kernel logs correctly, I _do_ have USB 2.0 active:
2005-04-05 11:20:16.200324500 <6>usb 5-1: new high speed USB device using
ehci_hcd and address 6
2005-04-05 11:20:16.264596500 <6>usbtest 5-1:1.0: FX2 device
2005-04-05 11:20:16.264640500 <6>usbtest 5-1:1.0: high speed {control bulk-in
bulk-out} tests (+alt)
2005-04-05 11:20:45.881313500 <4>usb 5-1: usbfs: interface 0 claimed while
'lt-usrper' sets config #1
2005-04-05 11:35:07.626327500 <4>usb 5-1: usbfs: interface 0 claimed while
'lt-usrper' sets config #1
Anybody have a clue they can share with me?
- Larry
signature.asc
Description: Digital signature
- [Discuss-gnuradio] usrper fails in usb_claim_interface,
Larry Doolittle <=
- Re: [Discuss-gnuradio] usrper fails in usb_claim_interface, mgray, 2005/04/05
- Re: [Discuss-gnuradio] usrper fails in usb_claim_interface, Eric Blossom, 2005/04/05
- Re: [Discuss-gnuradio] usrper fails in usb_claim_interface, Larry Doolittle, 2005/04/06
- Re: [Discuss-gnuradio] usrper fails in usb_claim_interface, Matt Ettus, 2005/04/06
- Re: [Discuss-gnuradio] usrper fails in usb_claim_interface, James Cooley, 2005/04/27
- Re: [Discuss-gnuradio] usrper fails in usb_claim_interface, Eric Blossom, 2005/04/27
- Re: [Discuss-gnuradio] usrper fails in usb_claim_interface, James Cooley, 2005/04/27
- Re: [Discuss-gnuradio] usrper fails in usb_claim_interface, Eric Blossom, 2005/04/27
- Re: [Discuss-gnuradio] usrper fails in usb_claim_interface, James Cooley, 2005/04/29
- Re: [Discuss-gnuradio] usrper fails in usb_claim_interface, Eric Blossom, 2005/04/29