[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Bug-gsl] cannot ls after installing gsl-1.5

From: Brian Gough
Subject: Re: [Bug-gsl] cannot ls after installing gsl-1.5
Date: Sun, 25 Jul 2004 17:52:10 +0100

Brian Austin writes:
 > The attached file includes the output you requested, plus a little bit at 
 > the beginning and end to demonstrate that ls works before the 
 > installation, doesn't afterwords, and how I fixed it.

Thanks.  Since the log file doesn's show anything related to
libpthread I assume the link must be created by an external command
such as /usr/bin/install or, more likely, ldconfig.  You could try
executing some examples of those commands from the log output
individually to see where the problem is occurring.

It definitely looks like an issue with FC2 rather than GSL -- I would
recommend raising it on their mailing list too.  I think it is likely
that you will see the same problem with any package installed using

Brian Gough

Network Theory Ltd,
Commercial support for GSL --- http://www.network-theory.co.uk/gsl/

reply via email to

[Prev in Thread] Current Thread [Next in Thread]