`tty->TS_ins_line` (al) is supprted.
`tty->TS_ins_multi_lines` (AL) is supprted.
`tty->TS_del_line` (dl) is supprted.
`tty->TS_del_multi_lines` (DL) is supprted.
to verify that I used `tput <cap_name>`.
I think, that is sufficient for `tty->line_ins_del_ok` to be true, but fo completeness:
`tty->TS_fwd_scroll` (sf) is supprted.
`tty->TS_rev_scroll` (sr) is supprted.
`tty->TS_set_window` (wi) is NOT supprted.
`tty->TS_set_scroll_region` (cs) is supprted.
`tty->TS_set_scroll_region_1` (cS) is NOT supprted.
BUt I do not know how to verify `tty->Wcm->cm_abs`.
```
tty->scroll_region_ok
= (tty->Wcm->cm_abs
&& (tty->TS_set_window || tty->TS_set_scroll_region || tty->TS_set_scroll_region_1));
```
```
tty->line_ins_del_ok
= (((tty->TS_ins_line || tty->TS_ins_multi_lines)
&& (tty->TS_del_line || tty->TS_del_multi_lines))
|| (tty->scroll_region_ok
&& tty->TS_fwd_scroll && tty->TS_rev_scroll));
```
On Tue, Aug 30, 2022 at 4:09 AM Eli Zaretskii <
eliz@gnu.org> wrote:
> From: Gerd Möllmann <gerd.moellmann@gmail.com>
> Cc: Eli Zaretskii <eliz@gnu.org>, 57434@debbugs.gnu.org
> Date: Tue, 30 Aug 2022 08:09:33 +0200
>
> Dmitrii Kuragin <kuragin@google.com> writes:
>
> > So far:
> > ```
> > :~/Desktop% tput al; echo $?
> > 0
> > :~/Desktop% tput AL; echo $?
> > 1%dL0
> > :~/Desktop% tput dl; echo $?
> > 0
> > :~/Desktop% tput DL; echo $?
> > 1%dM0
> > :~/Desktop% tput sf; echo $?
> >
> > 0
> > 0~/Desktop% tput sr; echo $?
> > :~/Desktop% tput wi; echo $?
> > tput: unknown terminfo capability 'wi'
> > 4
> > :~/Desktop% tput cs; echo $?
> > %p1%d;%p2%dr0
> > :~/Desktop% tput cS; echo $?
> > tput: unknown terminfo capability 'cS'
> > 4
> > ```
>
> Same here.
Thanks.
But I'm quite confused by all of this, because you don't show all the
relevant capabilities, AFAICT.
We have in term.c:
tty->scroll_region_ok
= (tty->Wcm->cm_abs
&& (tty->TS_set_window || tty->TS_set_scroll_region || tty->TS_set_scroll_region_1));
tty->line_ins_del_ok
= (((tty->TS_ins_line || tty->TS_ins_multi_lines)
&& (tty->TS_del_line || tty->TS_del_multi_lines))
|| (tty->scroll_region_ok
&& tty->TS_fwd_scroll && tty->TS_rev_scroll));
Please try all of the relevant capabilities and tell me which ones are
supported and which aren't. (Please also mention both the capability
string and its term.c flag name, so that I shouldn't need to jump
back-and-forth in the source looking up each one to understand what it
means.)
Then we have in dispnew.c:
/* If we cannot insert/delete lines, it's no use trying it. */
if (!FRAME_LINE_INS_DEL_OK (f))
inhibit_id_p = 1;
[...]
/* Try doing i/d line, if not yet inhibited. */
if (!inhibit_id_p && i < desired_matrix->nrows)
force_p |= scrolling (f);
Which means that 'scrolling', and thus 'scrolling_1' (where the
problem happens) will not be called if the line_ins_del_ok flag is not
set.
Furthermore, we have in scrolling_1:
if (FRAME_SCROLL_REGION_OK (frame))
{
calculate_direct_scrolling (frame, matrix, window_size,
unchanged_at_bottom,
draw_cost, old_draw_cost,
old_hash, new_hash, free_at_end);
do_direct_scrolling (frame, frame->current_matrix,
matrix, window_size, unchanged_at_top);
}
else
{
calculate_scrolling (frame, matrix, window_size, unchanged_at_bottom,
draw_cost, old_hash, new_hash,
free_at_end);
do_scrolling (frame,
frame->current_matrix, matrix, window_size,
unchanged_at_top);
}
which means do_direct_scrolling (which causes the problem) will not be
called if the terminal's scroll_region_ok flag is not set.
So given all of this, can you tell whether Emacs does TRT here? That
is:
Sorry, what does TRT mean?
. are all the capabilities that are supposed to be available for
these two flags are indeed available?
How can I verify it?
. do we need to check any additional capabilities, which are in fact
used in the problematic scenario, but not tested as part of
setting these two flags?
It makes sense to me, but since the output is still correct after the glitch, doesn't it mean that capabilities work correctly?
Assuming that Emacs does TRT, i.e. sets the flags correctly and uses
only the capabilities that are conditions for the flags set, then the
next important question is: why doesn't Gerd see the flickering on a
very similar system and the same terminal emulator? Is it possible
that some other local software configuration on Dmitrii's machine
causes this, directly or indirectly? E.g., Dmitrii, do you have some
display-related software/driver that has some "optimization" features
turned on? If so, can you turn them off and try again?
Thanks.
--
*If you get an email from me outside of the 9-5 it is not because I'm always on or expect an immediate response from you; it is because of work flexibility. Evening and weekend emails are a sign I allocated some regular working hours for other things (such as family, gym, friends,...). And I encourage you to feel free to do the same.