[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avr-chat] OT: will trade JtagIce2's for Dragon's
From: |
Preston Wilson |
Subject: |
Re: [avr-chat] OT: will trade JtagIce2's for Dragon's |
Date: |
Fri, 13 Feb 2009 17:38:03 -0500 |
User-agent: |
Microsoft-Entourage/11.4.0.080122 |
"Steve Franks" wrote:
> I hope this isn't inappropriate for this list. I've 3 jtagice2's with
> broken cables. I'll trade any of them for dragons. I never debug
> anyway. The cables are broken, so I cannot guarantee they function,
> but problems appear related to wiggling cables, and then they work
> intermittently. Tried to replace cables as per previous discussions
> on this list, but Atmel, in their infinite wisdom (1) used a flimsy
> 0.5mm cable for something that gets beat around the lab in the first
> place, and (2) stripped opposite sides of the cable on opposite ends,
> making something that can only be replaced by someone with the
> capability to strip flex. You have been warned. I've also
> disassembled them, and there appears no good place to solder headers
> inside to pick up the jtag signals. Anyway, $900 of scrap laying
> around my lab as far as I'm concerned...
>
> I suggest off-list replies if anyone with a flex stripper has interest in
> them.
>
> Steve
You can purchase new cables with the circuit board on the end from Digi-Key
and Mouser.
Search for ATJTAGPROBE at either site. They cost ~$40.00 US.
Molex carries individual cables that I believe will work as a replacement.
The 9" version is part number: 0210200332
http://www.molex.com/molex/products/datasheet.jsp?part=active/0210200332_CAB
LE.xml
Molex is good about sending samples, but in my experience they are not quick
to ship them.
-Preston