[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avr-gcc-list] Re: [avr-chat] Kdevelop for avr-gcc?
From: |
David Kelly |
Subject: |
Re: [avr-gcc-list] Re: [avr-chat] Kdevelop for avr-gcc? |
Date: |
Mon, 7 Mar 2005 21:40:51 -0600 |
On Mar 6, 2005, at 11:15 PM, Matthew MacClary wrote:
verify: $(PRG).hex
uisp --verify -dprog=stk200 -dpart=atmega128
-dlpt=/dev/parport0 --erase --upload if=$(PRG).hex
# uisp --verify -dprog=stk200 -dpart=atmega128 -dlpt=/dev/ppi0
--erase --upload if=$(PRG).hex # FreeBSD specific
If using devfs (which is most likely if FreeBSD 5.x) then you could add
this one line at the end of /etc/devfs.conf and forever (next reboot)
use the same Makefile rather than toggle comments as shown above:
link ppi0 parport0
Of course for a quick fix without reboot:
# ln -s /dev/ppi0 /dev/parport0
Maybe it would be better if you used "uisp0" on both Linux and FreeBSD
than to link the FreeBSD parallel port to the Linux name? Then if you
had more than one parallel port uisp0 could always be pointed and the
appropriate one.
--
David Kelly N4HHE, address@hidden
========================================================================
Whom computers would destroy, they must first drive mad.
- [avr-chat] Kdevelop for avr-gcc?, Kishore, 2005/03/05
- RE: [avr-chat] Kdevelop for avr-gcc?, Matt.VanDeWerken, 2005/03/06
- Re: [avr-chat] Kdevelop for avr-gcc?, Trevor White, 2005/03/07
- Re: [avr-chat] Kdevelop for avr-gcc?, Kishore, 2005/03/08
- Re: [avr-chat] Kdevelop for avr-gcc?, Joerg Wunsch, 2005/03/08
- Re: [avr-chat] Kdevelop for avr-gcc?, Trevor White, 2005/03/08
- Re: [avr-chat] Kdevelop for avr-gcc?, Joerg Wunsch, 2005/03/09
- Re: [avr-chat] Kdevelop for avr-gcc?, Kishore, 2005/03/09
- Re: [avr-chat] Kdevelop for avr-gcc?, Joerg Wunsch, 2005/03/09