[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[uracoli-devel] Zigbit variants
From: |
Charles Goyard |
Subject: |
[uracoli-devel] Zigbit variants |
Date: |
Mon, 06 Dec 2010 00:49:53 +0000 |
User-agent: |
Mozilla/5.0 (X11; U; Linux i686; fr; rv:1.9.2.12) Gecko/20101027 Lightning/1.0b2 Mnenhy/0.8.3 Thunderbird/3.1.6 |
Hi all,
I'm in the process of adding the boards I use for the juggle balls into
uracoli (there's about 4 of them), so it will make a good check for the
"adding your board" documentation.
However, there's something with zigbit modules I can't solve : the ones
built by Meshnetics use RF230 rev A and the newer ones from Atmel use
RF230 rev B. Some of my boards use RF230A, and some RF230B (about 50 of
each).
- should I use a #define ZIGBIT_230A / ZIGBIT_230B ?
- or should I make a new base_zdma1280B.h for the newer zigbit modules ?
- or more generally can we consider RF230A and RF230B are the same and
pass the test in trx_identify() ? (probably not a good idea, but I can't
find the "migration note" pointed out in the datasheet)
Thanks for any suggestions,
--
Charlot
- [uracoli-devel] Zigbit variants,
Charles Goyard <=