Re: [Tlf-devel] cwdaemon 0.9.4

[Rob Vance]

Sorry, I should have said that the pins numbers I was referring to were
on the parallel port.


On Fri, 2007-12-07 at 22:37 -0800, Rob Vance wrote:
> Hi All,
> 
> I am using Gutsy Gibbon (Ubuntu 7.10) with tlf 0.9.30 and cwdaemon
> 0.9.4.
> 
> I am having troubles with my set-up and I noticed that the pins that are
> supposed to toggle voltage for PTT are not working.
> 
> According to my voltmeter pin 16 is not toggling when sending a
> voice-keyer message.  Pin 17 works; it is toggling voltages for CW
> transmission (in CW mode).  Also, when I Apt-P to turn on PTT, neither
> pin changes voltage.
> 
> The rest of my set-up has other problems, but I measured this response
> straight off the parallel port of the PC.  I seemed to recall it worked
> last year, but I am not absolutely certain.
> 
> Rob, N6ROB
> 
> 
> 
> _______________________________________________
> Tlf-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/tlf-devel