[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Tlf-devel] Test-driving 0.9.5

From: Rein Couperus
Subject: Re: [Tlf-devel] Test-driving 0.9.5
Date: Tue, 04 Nov 2003 14:32:21 +0100
User-agent: KMail/1.5.4

On Monday 03 November 2003 05:01, Wilbert Knol wrote:
> Although I haven't used this version in anger, I had a play with it
> last night. Suggestions (some of which I may have mentioned before, I
> can't be sure):
> 1. Rig type 1901 (rpc rig daemon) does not work. The work-around is to
> shut down the daemon (su -c "rcrigd stop") and let tlf drive the rig
> directly.
> However, I have another app that uses the rig, and being able to use
> rpc rig would be really good. It should actually be easier than a
> normal rig, as no hardware is needed (port and port speed).
> 2. My Linux console runs 100x37 mode, which means tlf (80x25) goes in
> the top left hand corner, which looks a bit strange. Most Linux boxes
> have seen use console resolutions better than 80x25 (all the ones in
> the office do). I have set a boot option to get 80x25 VGA mode.
> I guess changing tlf to fit 100x32, 100x37, 100x40 etc etc consoles
> would be a major undertaking. I've had a sniff of this with my
> home-brew logger, which doesn't have as many windows as tlf.

My linux terminal is 160 x 75 :-) 
> 3. Tlf starts off at 20 WPM (the cwdaemon default) but picks up the
> correct tlf default when I try to wind it up via the ALT-V window.
This happens to the cwdaemon when tlf is started (tlf-0.9.5):

gollum:/home/rein/tlf/cwdaemon-0.7 # /usr/local/sbin/cwdaemon -n
cwdaemon: Not forking...
cwdaemon: Device used: parport0
cwdaemon: Press ^C to quit
cwdaemon: Parallel port opened
cwdaemon: Speed: 30 wpm
cwdaemon: Weight: 1
cwdaemon: PTT delay(TOD): 2 ms
cwdaemon: Tone: 800 Hz

as you see tlf does indeed set the cw speed to 30 wpm...

73, Rein PA0R

> WIlbert, ZL2BSJ
> _______________________________________________
> Tlf-devel mailing list
> address@hidden

address@hidden or address@hidden

reply via email to

[Prev in Thread] Current Thread [Next in Thread]