[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v2 4/4] migration: Fail migration blocker for --
From: |
Ashijeet Acharya |
Subject: |
Re: [Qemu-devel] [PATCH v2 4/4] migration: Fail migration blocker for --only-migratble |
Date: |
Wed, 4 Jan 2017 15:55:57 +0530 |
On Fri, Dec 16, 2016 at 4:44 PM, Greg Kurz <address@hidden> wrote:
> On Fri, 16 Dec 2016 15:23:44 +0530
> Ashijeet Acharya <address@hidden> wrote:
>
>> migrate_add_blocker should rightly fail if the '--only-migratable'
>> option was specified and the device in use should not be able to
>> perform the action which results in an unmigratable VM.
>>
>> Make migrate_add_blocker return -EACCES in this case.
>>
>> Signed-off-by: Ashijeet Acharya <address@hidden>
>> ---
>> block/qcow.c | 7 +++++--
>> block/vdi.c | 7 +++++--
>> block/vhdx.c | 8 +++++---
>> block/vmdk.c | 7 +++++--
>> block/vpc.c | 7 +++++--
>> block/vvfat.c | 8 +++++---
>> hw/9pfs/9p.c | 9 +++++++--
>> hw/display/virtio-gpu.c | 9 +++++++--
>> hw/intc/arm_gic_kvm.c | 7 +++++--
>> hw/intc/arm_gicv3_its_kvm.c | 5 ++++-
>> hw/intc/arm_gicv3_kvm.c | 5 ++++-
>> hw/misc/ivshmem.c | 10 ++++++++--
>> hw/scsi/vhost-scsi.c | 10 ++++++----
>> hw/virtio/vhost.c | 8 +++++---
>> migration/migration.c | 7 +++++++
>> target-i386/kvm.c | 7 +++++--
>> 16 files changed, 88 insertions(+), 33 deletions(-)
>>
>> diff --git a/block/qcow.c b/block/qcow.c
>> index 11526a1..7e5003ac 100644
>> --- a/block/qcow.c
>> +++ b/block/qcow.c
>> @@ -253,8 +253,11 @@ static int qcow_open(BlockDriverState *bs, QDict
>> *options, int flags,
>> "does not support live migration",
>> bdrv_get_device_or_node_name(bs));
>> ret = migrate_add_blocker(s->migration_blocker, errp);
>> - if (ret < 0) {
>> - error_free(s->migration_blocker);
>> + if (ret) {
>> + if (ret == -EACCES) {
>> + error_append_hint(errp, "Cannot use a node with qcow format as "
>> + "it does not support live migration");
>> + }
>> goto fail;
>> }
>>
>> diff --git a/block/vdi.c b/block/vdi.c
>> index 2b56f52..df45df4 100644
>> --- a/block/vdi.c
>> +++ b/block/vdi.c
>> @@ -472,8 +472,11 @@ static int vdi_open(BlockDriverState *bs, QDict
>> *options, int flags,
>> "does not support live migration",
>> bdrv_get_device_or_node_name(bs));
>> ret = migrate_add_blocker(s->migration_blocker, errp);
>> - if (ret < 0) {
>> - error_free(s->migration_blocker);
>> + if (ret) {
>> + if (ret == -EACCES) {
>> + error_append_hint(errp, "Cannot use a node with vdi format as "
>> + "it does not support live migration");
>> + }
>> goto fail_free_bmap;
>> }
>>
>> diff --git a/block/vhdx.c b/block/vhdx.c
>> index d81941b..118134e 100644
>> --- a/block/vhdx.c
>> +++ b/block/vhdx.c
>> @@ -996,11 +996,13 @@ static int vhdx_open(BlockDriverState *bs, QDict
>> *options, int flags,
>> "does not support live migration",
>> bdrv_get_device_or_node_name(bs));
>> ret = migrate_add_blocker(s->migration_blocker, errp);
>> - if (ret < 0) {
>> - error_free(s->migration_blocker);
>> + if (ret) {
>> + if (ret == -EACCES) {
>> + error_append_hint(errp, "Cannot use a node with vhdx format as "
>> + "it does not support live migration");
>> + }
>> goto fail;
>> }
>> -
>> if (flags & BDRV_O_RDWR) {
>> ret = vhdx_update_headers(bs, s, false, NULL);
>> if (ret < 0) {
>> diff --git a/block/vmdk.c b/block/vmdk.c
>> index 4a45a83..cd6a641 100644
>> --- a/block/vmdk.c
>> +++ b/block/vmdk.c
>> @@ -977,8 +977,11 @@ static int vmdk_open(BlockDriverState *bs, QDict
>> *options, int flags,
>> "does not support live migration",
>> bdrv_get_device_or_node_name(bs));
>> ret = migrate_add_blocker(s->migration_blocker, errp);
>> - if (ret < 0) {
>> - error_free(s->migration_blocker);
>> + if (ret) {
>> + if (ret == -EACCES) {
>> + error_append_hint(errp, "Cannot use a node with vmdk format as "
>> + "it does not support live migration");
>> + }
>> goto fail;
>> }
>>
>> diff --git a/block/vpc.c b/block/vpc.c
>> index 299a8c8..c935962 100644
>> --- a/block/vpc.c
>> +++ b/block/vpc.c
>> @@ -427,8 +427,11 @@ static int vpc_open(BlockDriverState *bs, QDict
>> *options, int flags,
>> "does not support live migration",
>> bdrv_get_device_or_node_name(bs));
>> ret = migrate_add_blocker(s->migration_blocker, errp);
>> - if (ret < 0) {
>> - error_free(s->migration_blocker);
>> + if (ret) {
>> + if (ret == -EACCES) {
>> + error_append_hint(errp, "Cannot use a node with vpc format as "
>> + "it does not support live migration");
>> + }
>> goto fail;
>> }
>>
>> diff --git a/block/vvfat.c b/block/vvfat.c
>> index 3de3320..f9a5f9b 100644
>> --- a/block/vvfat.c
>> +++ b/block/vvfat.c
>> @@ -1192,8 +1192,11 @@ static int vvfat_open(BlockDriverState *bs, QDict
>> *options, int flags,
>> "does not support live migration",
>> bdrv_get_device_or_node_name(bs));
>> ret = migrate_add_blocker(s->migration_blocker, errp);
>> - if (ret < 0) {
>> - error_free(s->migration_blocker);
>> + if (ret) {
>> + if (ret == -EACCES) {
>> + error_append_hint(errp, "Cannot use a node with vvfat
>> format "
>> + "as it does not support live migration");
>> + }
>> goto fail;
>> }
>> }
>> @@ -1202,7 +1205,6 @@ static int vvfat_open(BlockDriverState *bs, QDict
>> *options, int flags,
>> init_mbr(s, cyls, heads, secs);
>> }
>>
>> - // assert(is_consistent(s));
>> qemu_co_mutex_init(&s->lock);
>>
>> ret = 0;
>> diff --git a/hw/9pfs/9p.c b/hw/9pfs/9p.c
>> index e72ef43..01dd67f 100644
>> --- a/hw/9pfs/9p.c
>> +++ b/hw/9pfs/9p.c
>> @@ -1020,12 +1020,17 @@ static void coroutine_fn v9fs_attach(void *opaque)
>> */
>> if (!s->migration_blocker) {
>> int ret;
>> + Error *local_err;
>> s->root_fid = fid;
>> error_setg(&s->migration_blocker,
>> "Migration is disabled when VirtFS export path '%s' is
>> mounted in the guest using mount_tag '%s'",
>> s->ctx.fs_root ? s->ctx.fs_root : "NULL", s->tag);
>> - ret = migrate_add_blocker(s->migration_blocker, NULL);
>> - if (ret < 0) {
>> + ret = migrate_add_blocker(s->migration_blocker, &local_err);
>> + if (ret) {
>
> Why s/ret < 0/ret/ ? The migrate_add_blocker() function in this v2 only
> returns 0 or a negative errno...
No reason, maybe I forgot to change it back because I got no logical
error after compiling but I have fixed this at all occurrences.
>
>> + if (ret == -EACCES) {
>> + error_append_hint(&local_err, "Failed to mount VirtFS as it
>> "
>> + "does not support live migration");
>
> And then local_err is leaked...
Yes, I have freed it with error_free().
>
> BTW, I'm not even sure if this useful since this is a guest originated action.
>
>> + }
>
> This errno will be ultimately be returned to the mount(2) caller in the guest.
>
> When reading the manpage, it looks like EBUSY definitely makes more sense than
> EACCES:
>
> EACCES A component of a path was not searchable. (See also path_reso‐
> lution(7).) Or, mounting a read-only filesystem was attempted
> without giving the MS_RDONLY flag. Or, the block device source
> is located on a filesystem mounted with the MS_NODEV option.
>
> EBUSY source is already mounted. Or, it cannot be remounted read-
> only, because it still holds files open for writing. Or, it
> cannot be mounted on target because target is still busy (it is
> the working directory of some thread, the mount point of another
> device, has open files, etc.).
>
Reading the manpages definitely make your argument stronger but I am
not sure if I will be able to differentiate between what caused
the migrate_add_blocker to fail if I get -EBUSY for both the cases.
Ashijeet
>> err = ret;
>> clunk_fid(s, fid);
>> goto out;
>> diff --git a/hw/display/virtio-gpu.c b/hw/display/virtio-gpu.c
>> index 6e60b8c..1b02f4b 100644
>> --- a/hw/display/virtio-gpu.c
>> +++ b/hw/display/virtio-gpu.c
>> @@ -1102,6 +1102,7 @@ static void virtio_gpu_device_realize(DeviceState
>> *qdev, Error **errp)
>> VirtIOGPU *g = VIRTIO_GPU(qdev);
>> bool have_virgl;
>> int i;
>> + int ret;
>>
>> if (g->conf.max_outputs > VIRTIO_GPU_MAX_SCANOUTS) {
>> error_setg(errp, "invalid max_outputs > %d",
>> VIRTIO_GPU_MAX_SCANOUTS);
>> @@ -1120,8 +1121,12 @@ static void virtio_gpu_device_realize(DeviceState
>> *qdev, Error **errp)
>>
>> if (virtio_gpu_virgl_enabled(g->conf)) {
>> error_setg(&g->migration_blocker, "virgl is not yet migratable");
>> - if (migrate_add_blocker(g->migration_blocker, errp) < 0) {
>> - error_free(g->migration_blocker);
>> + ret = migrate_add_blocker(g->migration_blocker, errp);
>> + if (ret) {
>> + if (ret == -EACCES) {
>> + error_append_hint(errp, "Cannot use virgl as it does not "
>> + "support live migration yet");
>> + }
>> return;
>> }
>> }
>> diff --git a/hw/intc/arm_gic_kvm.c b/hw/intc/arm_gic_kvm.c
>> index 3614daa..b40ad5f 100644
>> --- a/hw/intc/arm_gic_kvm.c
>> +++ b/hw/intc/arm_gic_kvm.c
>> @@ -514,8 +514,11 @@ static void kvm_arm_gic_realize(DeviceState *dev, Error
>> **errp)
>> error_setg(&s->migration_blocker, "This operating system kernel
>> does "
>> "not support vGICv2 migration");
>> ret = migrate_add_blocker(s->migration_blocker, errp);
>> - if (ret < 0) {
>> - error_free(s->migration_blocker);
>> + if (ret) {
>> + if (ret == -EACCES) {
>> + error_append_hint(errp, "Failed to realize vGICv2 as its"
>> + " migrataion is not implemented yet");
>> + }
>> return;
>> }
>> }
>> diff --git a/hw/intc/arm_gicv3_its_kvm.c b/hw/intc/arm_gicv3_its_kvm.c
>> index 950a02f..3474642 100644
>> --- a/hw/intc/arm_gicv3_its_kvm.c
>> +++ b/hw/intc/arm_gicv3_its_kvm.c
>> @@ -70,7 +70,10 @@ static void kvm_arm_its_realize(DeviceState *dev, Error
>> **errp)
>> error_setg(&s->migration_blocker, "vITS migration is not implemented");
>> ret = migrate_add_blocker(s->migration_blocker, errp);
>> if (ret < 0) {
>> - error_free(s->migration_blocker);
>> + if (ret == -EACCES) {
>> + error_append_hint(errp, "Failed to realize vITS as its
>> migration "
>> + "is not implemented yet");
>> + }
>> return;
>> }
>>
>> diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c
>> index 06f6f30..be7b97c 100644
>> --- a/hw/intc/arm_gicv3_kvm.c
>> +++ b/hw/intc/arm_gicv3_kvm.c
>> @@ -118,7 +118,10 @@ static void kvm_arm_gicv3_realize(DeviceState *dev,
>> Error **errp)
>> error_setg(&s->migration_blocker, "vGICv3 migration is not
>> implemented");
>> ret = migrate_add_blocker(s->migration_blocker, errp);
>> if (ret < 0) {
>> - error_free(s->migration_blocker);
>> + if (ret == -EACCES) {
>> + error_append_hint(errp, "Failed to realize vGICv3 as its
>> migration"
>> + "is not implemented yet");
>> + }
>> return;
>> }
>>
>> diff --git a/hw/misc/ivshmem.c b/hw/misc/ivshmem.c
>> index 585cc5b..58f27b1 100644
>> --- a/hw/misc/ivshmem.c
>> +++ b/hw/misc/ivshmem.c
>> @@ -837,6 +837,7 @@ static void ivshmem_common_realize(PCIDevice *dev, Error
>> **errp)
>> {
>> IVShmemState *s = IVSHMEM_COMMON(dev);
>> Error *err = NULL;
>> + int ret;
>> uint8_t *pci_conf;
>> uint8_t attr = PCI_BASE_ADDRESS_SPACE_MEMORY |
>> PCI_BASE_ADDRESS_MEM_PREFETCH;
>> @@ -910,8 +911,13 @@ static void ivshmem_common_realize(PCIDevice *dev,
>> Error **errp)
>> if (!ivshmem_is_master(s)) {
>> error_setg(&s->migration_blocker,
>> "Migration is disabled when using feature 'peer mode' in
>> device 'ivshmem'");
>> - if (migrate_add_blocker(s->migration_blocker, errp) < 0) {
>> - error_free(s->migration_blocker);
>> + ret = migrate_add_blocker(s->migration_blocker, errp);
>> + if (ret) {
>> + if (ret == -EACCES) {
>> + error_append_hint(errp, "Cannot use the 'peer mode' feature
>> "
>> + "in device 'ivshmem' as it does not "
>> + "support live migration");
>> + }
>> return;
>> }
>> }
>> diff --git a/hw/scsi/vhost-scsi.c b/hw/scsi/vhost-scsi.c
>> index ff503d0..0c571f8 100644
>> --- a/hw/scsi/vhost-scsi.c
>> +++ b/hw/scsi/vhost-scsi.c
>> @@ -244,8 +244,12 @@ static void vhost_scsi_realize(DeviceState *dev, Error
>> **errp)
>> error_setg(&s->migration_blocker,
>> "vhost-scsi does not support migration");
>> ret = migrate_add_blocker(s->migration_blocker, errp);
>> - if (ret < 0) {
>> - goto free_blocker;
>> + if (ret) {
>> + if (ret == -EACCES) {
>> + error_append_hint(errp, "Cannot use vhost-scsi as it does not "
>> + "support live migration");
>> + }
>> + goto close_fd;
>> }
>>
>> s->dev.nvqs = VHOST_SCSI_VQ_NUM_FIXED + vs->conf.num_queues;
>> @@ -272,8 +276,6 @@ static void vhost_scsi_realize(DeviceState *dev, Error
>> **errp)
>> free_vqs:
>> migrate_del_blocker(s->migration_blocker);
>> g_free(s->dev.vqs);
>> - free_blocker:
>> - error_free(s->migration_blocker);
>> close_fd:
>> close(vhostfd);
>> return;
>> diff --git a/hw/virtio/vhost.c b/hw/virtio/vhost.c
>> index 416fada..1c4a4f9 100644
>> --- a/hw/virtio/vhost.c
>> +++ b/hw/virtio/vhost.c
>> @@ -1159,9 +1159,11 @@ int vhost_dev_init(struct vhost_dev *hdev, void
>> *opaque,
>> if (hdev->migration_blocker != NULL) {
>> Error *local_err;
>> r = migrate_add_blocker(hdev->migration_blocker, &local_err);
>> - if (r < 0) {
>> - error_report_err(local_err);
>> - error_free(hdev->migration_blocker);
>> + if (r) {
>> + if (r == -EACCES) {
>> + error_append_hint(&local_err, "Cannot use vhost drivers as "
>> + "it does not support live migration");
>> + }
>> goto fail_busyloop;
>> }
>> }
>> diff --git a/migration/migration.c b/migration/migration.c
>> index 713e012..ab34328 100644
>> --- a/migration/migration.c
>> +++ b/migration/migration.c
>> @@ -1115,9 +1115,16 @@ int migrate_add_blocker(Error *reason, Error **errp)
>> {
>> if (migration_is_idle(NULL)) {
>> migration_blockers = g_slist_prepend(migration_blockers, reason);
>> + error_free(reason);
>> return 0;
>> }
>>
>> + if (only_migratable) {
>> + error_setg(errp, "Failed to add migration blocker:
>> --only-migratable "
>> + "was specified");
>> + return -EACCES;
>> + }
>> +
>> error_setg(errp, "Cannot block a migration already in-progress");
>> return -EBUSY;
>> }
>> diff --git a/target-i386/kvm.c b/target-i386/kvm.c
>> index 6031a1c..05c8365 100644
>> --- a/target-i386/kvm.c
>> +++ b/target-i386/kvm.c
>> @@ -962,7 +962,11 @@ int kvm_arch_init_vcpu(CPUState *cs)
>> "State blocked by non-migratable CPU device"
>> " (invtsc flag)");
>> r = migrate_add_blocker(invtsc_mig_blocker, NULL);
>> - if (r < 0) {
>> + if (r) {
>> + if (r == -EACCES) {
>> + error_report("kvm: non-migratable CPU device but"
>> + " --only-migratable was specified");
>> + }
>> error_report("kvm: migrate_add_blocker failed");
>> goto efail;
>> }
>> @@ -1009,7 +1013,6 @@ int kvm_arch_init_vcpu(CPUState *cs)
>> fail:
>> migrate_del_blocker(invtsc_mig_blocker);
>> efail:
>> - error_free(invtsc_mig_blocker);
>> return r;
>> }
>>
>
- Re: [Qemu-devel] [PATCH v2 4/4] migration: Fail migration blocker for --only-migratble,
Ashijeet Acharya <=