[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v10 19/21] i.MX: Add the i.MX25 3DS PDK platefor
From: |
Peter Crosthwaite |
Subject: |
Re: [Qemu-devel] [PATCH v10 19/21] i.MX: Add the i.MX25 3DS PDK plateform |
Date: |
Mon, 6 Jul 2015 00:43:49 -0700 |
On Sun, Jul 5, 2015 at 5:05 PM, Jean-Christophe Dubois
<address@hidden> wrote:
> Signed-off-by: Jean-Christophe Dubois <address@hidden>
> ---
>
> Changes since v1:
> * Added a ds1338 I2C device for qtest purpose.
>
> Changes since v2:
> * none
>
> Changes since v3:
> * Rework GPL header
> * use I2C constructor helper.
>
> Changes since v4:
> * use sysbus_create_simple() instead of I2C constructor helper
>
> Changes since v5:
> * Add ds1338 only for qtest mode.
> * small comment fixes.
>
> Changes since v6:
> * Allow for more than 4 serial if suppoted by Qemu.
>
> Changes since v7:
> * Move the SOC part into its own file.
>
> Changes since v8:
> * rework SDRAM memory initialisation
>
> Changes since v9:
> * no change
>
> hw/arm/Makefile.objs | 2 +-
> hw/arm/imx25_3ds.c | 170
> +++++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 171 insertions(+), 1 deletion(-)
> create mode 100644 hw/arm/imx25_3ds.c
>
> diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
> index b83aaca..dc11c0a 100644
> --- a/hw/arm/Makefile.objs
> +++ b/hw/arm/Makefile.objs
> @@ -13,5 +13,5 @@ obj-y += omap1.o omap2.o strongarm.o
> obj-$(CONFIG_ALLWINNER_A10) += allwinner-a10.o cubieboard.o
> obj-$(CONFIG_STM32F205_SOC) += stm32f205_soc.o
> obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp.o xlnx-ep108.o
> -obj-$(CONFIG_FSL_IMX25) += fsl-imx25.o
> +obj-$(CONFIG_FSL_IMX25) += fsl-imx25.o imx25_3ds.o
> obj-$(CONFIG_FSL_IMX31) += fsl-imx31.o kzm.o
> diff --git a/hw/arm/imx25_3ds.c b/hw/arm/imx25_3ds.c
> new file mode 100644
> index 0000000..fef462a
> --- /dev/null
> +++ b/hw/arm/imx25_3ds.c
> @@ -0,0 +1,170 @@
> +/*
> + * Copyright (c) 2013 Jean-Christophe Dubois <address@hidden>
> + *
> + * 3Dstack Board System emulation.
> + *
Should it be called the PDK board?
Regards,
Peter
> + * Based on hw/arm/kzm.c
> + *
> + * Copyright (c) 2008 OKL and 2011 NICTA
> + * Written by Hans at OK-Labs
> + * Updated by Peter Chubb.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but
> WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
> + * for more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include "hw/arm/fsl-imx25.h"
> +#include "hw/boards.h"
> +#include "qemu/error-report.h"
> +#include "exec/address-spaces.h"
> +#include "sysemu/qtest.h"
> +#include "hw/i2c/i2c.h"
> +
> +/* Memory map for 3D-Stack Emulation Baseboard:
> + * 0x00000000-0x7fffffff See i.MX25 SOC fr support
> + * 0x80000000-0x87ffffff RAM + Alias EMULATED
> + * 0x90000000-0x9fffffff RAM + Alias EMULATED
> + * 0xa0000000-0xa7ffffff Flash IGNORED
> + * 0xa8000000-0xafffffff Flash IGNORED
> + * 0xb0000000-0xb1ffffff SRAM IGNORED
> + * 0xb2000000-0xb3ffffff SRAM IGNORED
> + * 0xb4000000-0xb5ffffff CS4 IGNORED
> + * 0xb6000000-0xb8000fff Reserved IGNORED
> + * 0xb8001000-0xb8001fff SDRAM CTRL reg IGNORED
> + * 0xb8002000-0xb8002fff WEIM CTRL reg IGNORED
> + * 0xb8003000-0xb8003fff M3IF CTRL reg IGNORED
> + * 0xb8004000-0xb8004fff EMI CTRL reg IGNORED
> + * 0xb8005000-0xbaffffff Reserved IGNORED
> + * 0xbb000000-0xbb000fff NAND flash area buf IGNORED
> + * 0xbb001000-0xbb0011ff NAND flash reserved IGNORED
> + * 0xbb001200-0xbb001dff Reserved IGNORED
> + * 0xbb001e00-0xbb001fff NAN flash CTRL reg IGNORED
> + * 0xbb012000-0xbfffffff Reserved IGNORED
> + * 0xc0000000-0xffffffff Reserved IGNORED
> + */
> +
> +typedef struct imx25_3ds {
> + FslImx25State soc;
> + MemoryRegion ram[2];
> + MemoryRegion ram_alias;
> +} imx25_3ds;
> +
> +#define IMX25_3DS_ADDRESS (FSL_IMX25_SDRAM0_ADDR)
> +
> +static struct arm_boot_info imx25_3ds_binfo;
> +
> +static void imx25_3ds_init(MachineState *machine)
> +{
> + imx25_3ds *s = g_new0(imx25_3ds, 1);
> + Error *err = NULL;
> + unsigned int ram_size;
> + int i;
> +
> + object_initialize(&s->soc, sizeof(s->soc), TYPE_FSL_IMX25);
> + object_property_add_child(OBJECT(machine), "soc", OBJECT(&s->soc),
> + &error_abort);
> +
> + object_property_set_bool(OBJECT(&s->soc), true, "realized", &err);
> + if (err != NULL) {
> + error_report("%s", error_get_pretty(err));
> + exit(1);
> + }
> +
> + /* We need to initialize our memory */
> +
> + if (machine->ram_size > (FSL_IMX25_SDRAM0_SIZE + FSL_IMX25_SDRAM1_SIZE))
> {
> + error_report("WARNING: RAM size " RAM_ADDR_FMT " above max supported,
> "
> + "reduced to %x", machine->ram_size,
> + FSL_IMX25_SDRAM0_SIZE + FSL_IMX25_SDRAM1_SIZE);
> + machine->ram_size = FSL_IMX25_SDRAM0_SIZE + FSL_IMX25_SDRAM1_SIZE;
> + }
> +
> + ram_size = machine->ram_size;
> + i = 0;
> +
> + /* create our main memory */
> + while (ram_size && (i < 2)) {
> + unsigned int size;
> + char ram_name[20];
> + static const struct {
> + hwaddr addr;
> + unsigned int size;
> + } ram[2] = {
> + { FSL_IMX25_SDRAM0_ADDR, FSL_IMX25_SDRAM0_SIZE },
> + { FSL_IMX25_SDRAM1_ADDR, FSL_IMX25_SDRAM1_SIZE },
> + };
> +
> + if (ram_size > ram[i].size) {
> + size = ram[i].size;
> + } else {
> + size = ram_size;
> + }
> +
> + sprintf(ram_name, "imx25.ram%d", i);
> +
> + ram_size -= size;
> +
> + memory_region_init_ram(&s->ram[i], NULL, ram_name, size,
> + &error_abort);
> + vmstate_register_ram_global(&s->ram[i]);
> + memory_region_add_subregion(get_system_memory(), ram[i].addr,
> + &s->ram[i]);
> + if (size < ram[i].size) {
> + memory_region_init_alias(&s->ram_alias, NULL, "ram.alias",
> + &s->ram[i], 0, ram[i].size - size);
> + memory_region_add_subregion(get_system_memory(),
> + ram[i].addr + size, &s->ram_alias);
> + }
> +
> + i++;
> + }
> +
> + imx25_3ds_binfo.ram_size = machine->ram_size;
> + imx25_3ds_binfo.kernel_filename = machine->kernel_filename;
> + imx25_3ds_binfo.kernel_cmdline = machine->kernel_cmdline;
> + imx25_3ds_binfo.initrd_filename = machine->initrd_filename;
> + imx25_3ds_binfo.loader_start = IMX25_3DS_ADDRESS;
> + imx25_3ds_binfo.board_id = 1771,
> + imx25_3ds_binfo.nb_cpus = 1;
> +
> + /*
> + * We test explicitly for qtest here as it is not done (yet?) in
> + * arm_load_kernel(). Without this the "make check" command would
> + * fail.
> + */
> + if (!qtest_enabled()) {
> + arm_load_kernel(&s->soc.cpu, &imx25_3ds_binfo);
> + } else {
> + /*
> + * This I2C device doesn't exist on the real board.
> + * We add it here (only on qtest usage) to be able to do a bit
> + * of simple qtest. See "make check" for details.
> + */
> + i2c_create_slave((I2CBus *)qdev_get_child_bus(DEVICE(&s->soc.i2c[0]),
> + "i2c"),
> + "ds1338", 0x68);
> + }
> +}
> +
> +static QEMUMachine imx25_3ds_machine = {
> + .name = "imx25_3ds",
> + .desc = "ARM i.MX25 PDK board (ARM926)",
> + .init = imx25_3ds_init,
> +};
> +
> +static void imx25_3ds_machine_init(void)
> +{
> + qemu_register_machine(&imx25_3ds_machine);
> +}
> +
> +machine_init(imx25_3ds_machine_init)
> --
> 2.1.4
>
>
- Re: [Qemu-devel] [PATCH v10 14/21] i.MX: Add SOC support for i.MX31, (continued)
- [Qemu-devel] [PATCH v10 15/21] i.MX: KZM now uses the standalone i.MX31 SOC support, Jean-Christophe Dubois, 2015/07/05
- [Qemu-devel] [PATCH v10 16/21] i.MX: Add I2C controller emulator, Jean-Christophe Dubois, 2015/07/05
- [Qemu-devel] [PATCH v10 17/21] i.MX: Add FEC Ethernet Emulator, Jean-Christophe Dubois, 2015/07/05
- [Qemu-devel] [PATCH v10 18/21] i.MX: Add SOC support for i.MX25, Jean-Christophe Dubois, 2015/07/05
- [Qemu-devel] [PATCH v10 19/21] i.MX: Add the i.MX25 3DS PDK plateform, Jean-Christophe Dubois, 2015/07/05
- Re: [Qemu-devel] [PATCH v10 19/21] i.MX: Add the i.MX25 3DS PDK plateform,
Peter Crosthwaite <=
- [Qemu-devel] [PATCH v10 20/21] i.MX: Add qtest support for I2C device emulator., Jean-Christophe Dubois, 2015/07/05
- [Qemu-devel] [PATCH v10 21/21] i.MX: Adding i2C devices to i.MX31 SOC, Jean-Christophe Dubois, 2015/07/05