[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v10 15/21] i.MX: KZM now uses the standalone i.M
From: |
Peter Crosthwaite |
Subject: |
Re: [Qemu-devel] [PATCH v10 15/21] i.MX: KZM now uses the standalone i.MX31 SOC support |
Date: |
Mon, 6 Jul 2015 00:31:33 -0700 |
On Sun, Jul 5, 2015 at 5:05 PM, Jean-Christophe Dubois
<address@hidden> wrote:
> Tested by booting a minimal linux system on the emulated plateform
"Linux" "platform"
>
> Note: Qdev construction helper functions are removed with this patch.
>
So is the goal of the inline header movements to minimise the file
scope of this patch? I would say it is ok to have this one touch them
all or if you are worried about it, what I suggest is you do the soc
conversion as a patch and leave the _create helpers as dead functions.
GCC won't complain about non-static unused functions so it is ok to
leave them dead.
> Signed-off-by: Jean-Christophe Dubois <address@hidden>
> ---
>
> Changes since v1:
> * not present on v1
>
> Changes since v2:
> * not present on v2
>
> Changes since v3:
> * not present on v3
>
> Changes since v4:
> * not present on v4
>
> Changes since v5:
> * not present on v5
>
> Changes since v6:
> * not present on v6
>
> Changes since v7:
> * update KZM target to use new emulators
>
> Changes since v8:
> * update KZM to user i.MX31 SOC
> * rework SDRAM memory initialisation
>
> Changes since v9:
> * remove all Qdev construction helper fucntions.
>
> hw/arm/Makefile.objs | 4 +-
> hw/arm/kzm.c | 213
> ++++++++++++++++++++++++++-------------------------
> include/hw/arm/imx.h | 72 -----------------
> 3 files changed, 112 insertions(+), 177 deletions(-)
> delete mode 100644 include/hw/arm/imx.h
>
> diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
> index f35f731..2fbe344 100644
> --- a/hw/arm/Makefile.objs
> +++ b/hw/arm/Makefile.objs
> @@ -1,6 +1,6 @@
> obj-y += boot.o collie.o exynos4_boards.o gumstix.o highbank.o
> obj-$(CONFIG_DIGIC) += digic_boards.o
> -obj-y += integratorcp.o kzm.o mainstone.o musicpal.o nseries.o
> +obj-y += integratorcp.o mainstone.o musicpal.o nseries.o
> obj-y += omap_sx1.o palm.o realview.o spitz.o stellaris.o
> obj-y += tosa.o versatilepb.o vexpress.o virt.o xilinx_zynq.o z2.o
> obj-$(CONFIG_ACPI) += virt-acpi-build.o
> @@ -13,4 +13,4 @@ obj-y += omap1.o omap2.o strongarm.o
> obj-$(CONFIG_ALLWINNER_A10) += allwinner-a10.o cubieboard.o
> obj-$(CONFIG_STM32F205_SOC) += stm32f205_soc.o
> obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp.o xlnx-ep108.o
> -obj-$(CONFIG_FSL_IMX31) += fsl-imx31.o
> +obj-$(CONFIG_FSL_IMX31) += fsl-imx31.o kzm.o
> diff --git a/hw/arm/kzm.c b/hw/arm/kzm.c
> index d7af230..6925833 100644
> --- a/hw/arm/kzm.c
> +++ b/hw/arm/kzm.c
> @@ -13,131 +13,138 @@
> * i.MX31 SoC
> */
>
> -#include "hw/sysbus.h"
> +#include "hw/arm/fsl-imx31.h"
> +#include "hw/boards.h"
> +#include "qemu/error-report.h"
> #include "exec/address-spaces.h"
> -#include "hw/hw.h"
> -#include "hw/arm/arm.h"
> -#include "hw/devices.h"
> #include "net/net.h"
> -#include "sysemu/sysemu.h"
> -#include "hw/boards.h"
> +#include "hw/devices.h"
> #include "hw/char/serial.h"
> -#include "hw/intc/imx_avic.h"
> -#include "hw/arm/imx.h"
> -
> - /* Memory map for Kzm Emulation Baseboard:
> - * 0x00000000-0x00003fff 16k secure ROM IGNORED
> - * 0x00004000-0x00407fff Reserved IGNORED
> - * 0x00404000-0x00407fff ROM IGNORED
> - * 0x00408000-0x0fffffff Reserved IGNORED
> - * 0x10000000-0x1fffbfff RAM aliasing IGNORED
> - * 0x1fffc000-0x1fffffff RAM EMULATED
> - * 0x20000000-0x2fffffff Reserved IGNORED
> - * 0x30000000-0x7fffffff I.MX31 Internal Register Space
> - * 0x43f00000 IO_AREA0
> - * 0x43f90000 UART1 EMULATED
> - * 0x43f94000 UART2 EMULATED
> - * 0x68000000 AVIC EMULATED
> - * 0x53f80000 CCM EMULATED
> - * 0x53f94000 PIT 1 EMULATED
> - * 0x53f98000 PIT 2 EMULATED
> - * 0x53f90000 GPT EMULATED
> - * 0x80000000-0x87ffffff RAM EMULATED
> - * 0x88000000-0x8fffffff RAM Aliasing EMULATED
> - * 0xa0000000-0xafffffff NAND Flash IGNORED
> - * 0xb0000000-0xb3ffffff Unavailable IGNORED
> - * 0xb4000000-0xb4000fff 8-bit free space IGNORED
> - * 0xb4001000-0xb400100f Board control IGNORED
> - * 0xb4001003 DIP switch
> - * 0xb4001010-0xb400101f 7-segment LED IGNORED
> - * 0xb4001020-0xb400102f LED IGNORED
> - * 0xb4001030-0xb400103f LED IGNORED
> - * 0xb4001040-0xb400104f FPGA, UART EMULATED
> - * 0xb4001050-0xb400105f FPGA, UART EMULATED
> - * 0xb4001060-0xb40fffff FPGA IGNORED
> - * 0xb6000000-0xb61fffff LAN controller EMULATED
> - * 0xb6200000-0xb62fffff FPGA NAND Controller IGNORED
> - * 0xb6300000-0xb7ffffff Free IGNORED
> - * 0xb8000000-0xb8004fff Memory control registers IGNORED
> - * 0xc0000000-0xc3ffffff PCMCIA/CF IGNORED
> - * 0xc4000000-0xffffffff Reserved IGNORED
> - */
> -
> -#define KZM_RAMADDRESS (0x80000000)
> -#define KZM_FPGA (0xb4001040)
> +#include "sysemu/qtest.h"
> +
> +/* Memory map for Kzm Emulation Baseboard:
> + * 0x00000000-0x7fffffff See i.MX31 SOC for support
> + * 0x80000000-0x8fffffff RAM EMULATED
> + * 0x90000000-0x9fffffff RAM EMULATED
> + * 0xa0000000-0xafffffff Flash IGNORED
> + * 0xb0000000-0xb3ffffff Unavailable IGNORED
> + * 0xb4000000-0xb4000fff 8-bit free space IGNORED
> + * 0xb4001000-0xb400100f Board control IGNORED
> + * 0xb4001003 DIP switch
> + * 0xb4001010-0xb400101f 7-segment LED IGNORED
> + * 0xb4001020-0xb400102f LED IGNORED
> + * 0xb4001030-0xb400103f LED IGNORED
> + * 0xb4001040-0xb400104f FPGA, UART EMULATED
> + * 0xb4001050-0xb400105f FPGA, UART EMULATED
> + * 0xb4001060-0xb40fffff FPGA IGNORED
> + * 0xb6000000-0xb61fffff LAN controller EMULATED
> + * 0xb6200000-0xb62fffff FPGA NAND Controller IGNORED
> + * 0xb6300000-0xb7ffffff Free IGNORED
> + * 0xb8000000-0xb8004fff Memory control registers IGNORED
> + * 0xc0000000-0xc3ffffff PCMCIA/CF IGNORED
> + * 0xc4000000-0xffffffff Reserved IGNORED
> + */
> +
> +typedef struct imx31_kzm {
CamelCase for Typename. IMX all caps.
> + FslImx31State soc;
> + MemoryRegion ram[2];
> + MemoryRegion ram_alias;
> +} imx31_kzm;
> +
> +#define KZM_RAM_ADDR (FSL_IMX31_SDRAM0_ADDR)
> +#define KZM_FPGA_ADDR (FSL_IMX31_CS4_ADDR + 0x1040)
> +#define KZM_LAN9118_ADDR (FSL_IMX31_CS5_ADDR)
>
> static struct arm_boot_info kzm_binfo = {
> - .loader_start = KZM_RAMADDRESS,
> + .loader_start = KZM_RAM_ADDR,
> .board_id = 1722,
> };
>
> static void kzm_init(MachineState *machine)
> {
> - ram_addr_t ram_size = machine->ram_size;
> - const char *cpu_model = machine->cpu_model;
> - const char *kernel_filename = machine->kernel_filename;
> - const char *kernel_cmdline = machine->kernel_cmdline;
> - const char *initrd_filename = machine->initrd_filename;
> - ARMCPU *cpu;
> - MemoryRegion *address_space_mem = get_system_memory();
> - MemoryRegion *ram = g_new(MemoryRegion, 1);
> - MemoryRegion *sram = g_new(MemoryRegion, 1);
> - MemoryRegion *ram_alias = g_new(MemoryRegion, 1);
> - DeviceState *dev;
> - DeviceState *ccm;
> -
> - if (!cpu_model) {
> - cpu_model = "arm1136";
> - }
> -
> - cpu = cpu_arm_init(cpu_model);
> - if (!cpu) {
> - fprintf(stderr, "Unable to find CPU definition\n");
> + imx31_kzm *s = g_new0(imx31_kzm, 1);
> + Error *err = NULL;
> + unsigned int ram_size;
> + unsigned int i;
> +
> + object_initialize(&s->soc, sizeof(s->soc), TYPE_FSL_IMX31);
> + object_property_add_child(OBJECT(machine), "soc", OBJECT(&s->soc),
> + &error_abort);
> +
> + object_property_set_bool(OBJECT(&s->soc), true, "realized", &err);
> + if (err != NULL) {
> + error_report("%s", error_get_pretty(err));
> exit(1);
> }
>
> - /* On a real system, the first 16k is a `secure boot rom' */
> -
> - memory_region_allocate_system_memory(ram, NULL, "kzm.ram", ram_size);
> - memory_region_add_subregion(address_space_mem, KZM_RAMADDRESS, ram);
> -
> - memory_region_init_alias(ram_alias, NULL, "ram.alias", ram, 0, ram_size);
> - memory_region_add_subregion(address_space_mem, 0x88000000, ram_alias);
> -
> - memory_region_init_ram(sram, NULL, "kzm.sram", 0x4000, &error_abort);
> - memory_region_add_subregion(address_space_mem, 0x1FFFC000, sram);
> -
> - dev = sysbus_create_varargs(TYPE_IMX_AVIC, 0x68000000,
> - qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ),
> - qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_FIQ),
> - NULL);
> -
> - imx_serial_create(0, 0x43f90000, qdev_get_gpio_in(dev, 45));
> - imx_serial_create(1, 0x43f94000, qdev_get_gpio_in(dev, 32));
> -
> - ccm = sysbus_create_simple(TYPE_IMX_CCM, 0x53f80000, NULL);
> + /* Check the amount of memory is compatible with the SOC */
> + if (machine->ram_size > (FSL_IMX31_SDRAM0_SIZE + FSL_IMX31_SDRAM1_SIZE))
> {
> + error_report("WARNING: RAM size " RAM_ADDR_FMT " above max
> supported, "
> + "reduced to %x", machine->ram_size,
> + FSL_IMX31_SDRAM0_SIZE + FSL_IMX31_SDRAM1_SIZE);
> + machine->ram_size = FSL_IMX31_SDRAM0_SIZE + FSL_IMX31_SDRAM1_SIZE;
> + }
>
> - imx_timerp_create(0x53f94000, qdev_get_gpio_in(dev, 28), ccm);
> - imx_timerp_create(0x53f98000, qdev_get_gpio_in(dev, 27), ccm);
> - imx_timerg_create(0x53f90000, qdev_get_gpio_in(dev, 29), ccm);
> + ram_size = machine->ram_size;
> + i = 0;
> +
> + /* initialize our memory */
> + while (ram_size && (i < 2)) {
for loop.
> + unsigned int size;
> + char ram_name[20];
> + static const struct {
> + hwaddr addr;
> + unsigned int size;
> + } ram[2] = {
> + { FSL_IMX31_SDRAM0_ADDR, FSL_IMX31_SDRAM0_SIZE },
> + { FSL_IMX31_SDRAM1_ADDR, FSL_IMX31_SDRAM1_SIZE },
> + };
> +
> + if (ram_size > ram[i].size) {
> + size = ram[i].size;
> + } else {
> + size = ram_size;
> + }
> +
> + sprintf(ram_name, "kzm.ram%d", i);
> +
> + ram_size -= size;
> +
> + memory_region_init_ram(&s->ram[i], NULL, ram_name, size,
> + &error_abort);
> + vmstate_register_ram_global(&s->ram[i]);
memory_region_allocate_system_memory().
> + memory_region_add_subregion(get_system_memory(), ram[i].addr,
> + &s->ram[i]);
> + if (size < ram[i].size) {
> + memory_region_init_alias(&s->ram_alias, NULL, "ram.alias",
> + &s->ram[i], 0, ram[i].size - size);
> + memory_region_add_subregion(get_system_memory(),
> + ram[i].addr + size, &s->ram_alias);
> + }
> +
> + i++;
> + }
>
> if (nd_table[0].used) {
> - lan9118_init(&nd_table[0], 0xb6000000, qdev_get_gpio_in(dev, 52));
> + lan9118_init(&nd_table[0], KZM_LAN9118_ADDR,
> + qdev_get_gpio_in(DEVICE(&s->soc.avic), 52));
> }
>
> if (serial_hds[2]) { /* touchscreen */
Curious to how this does a touchscreen? Looks like a 3rd UART in an
attached FPGA?
Regards,
Peter
> - serial_mm_init(address_space_mem, KZM_FPGA+0x10, 0,
> - qdev_get_gpio_in(dev, 52),
> - 14745600, serial_hds[2],
> - DEVICE_NATIVE_ENDIAN);
> + serial_mm_init(get_system_memory(), KZM_FPGA_ADDR+0x10, 0,
> + qdev_get_gpio_in(DEVICE(&s->soc.avic), 52),
> + 14745600, serial_hds[2], DEVICE_NATIVE_ENDIAN);
> }
>
> - kzm_binfo.ram_size = ram_size;
> - kzm_binfo.kernel_filename = kernel_filename;
> - kzm_binfo.kernel_cmdline = kernel_cmdline;
> - kzm_binfo.initrd_filename = initrd_filename;
> + kzm_binfo.ram_size = machine->ram_size;
> + kzm_binfo.kernel_filename = machine->kernel_filename;
> + kzm_binfo.kernel_cmdline = machine->kernel_cmdline;
> + kzm_binfo.initrd_filename = machine->initrd_filename;
> kzm_binfo.nb_cpus = 1;
> - arm_load_kernel(cpu, &kzm_binfo);
> +
> + if (!qtest_enabled()) {
> + arm_load_kernel(&s->soc.cpu, &kzm_binfo);
> + }
> }
>
> static QEMUMachine kzm_machine = {
> diff --git a/include/hw/arm/imx.h b/include/hw/arm/imx.h
> deleted file mode 100644
> index b7aa4b6..0000000
> --- a/include/hw/arm/imx.h
> +++ /dev/null
> @@ -1,72 +0,0 @@
> -/*
> - * i.MX31 emulation
> - *
> - * Copyright (C) 2012 Peter Chubb
> - * NICTA
> - *
> - * This code is released under the GPL, version 2.0 or later
> - * See the file `../COPYING' for details.
> - */
> -
> -#ifndef IMX_H
> -#define IMX_H
> -
> -#include "hw/qdev-core.h"
> -#include "hw/sysbus.h"
> -#include "hw/char/imx_serial.h"
> -#include "hw/misc/imx_ccm.h"
> -#include "hw/timer/imx_epit.h"
> -#include "hw/timer/imx_gpt.h"
> -
> -/***
> - * This Qdev construction helper is going to be removed soon
> - */
> -static inline void imx_serial_create(int uart, const hwaddr addr, qemu_irq
> irq)
> -{
> - /* uart parameter is not used anymore */
> - DeviceState *dev;
> -
> - dev = qdev_create(NULL, TYPE_IMX_SERIAL);
> -
> - if (dev) {
> - SysBusDevice *bus;
> -
> - bus = SYS_BUS_DEVICE(dev);
> -
> - qdev_init_nofail(dev);
> -
> - if (addr != (hwaddr)-1) {
> - sysbus_mmio_map(bus, 0, addr);
> - }
> -
> - sysbus_connect_irq(bus, 0, irq);
> - }
> -}
> -
> -static inline
> -void imx_timerp_create(const hwaddr addr,
> - qemu_irq irq,
> - DeviceState *ccm)
> -{
> - IMXEPITState *pp;
> - DeviceState *dev;
> -
> - dev = sysbus_create_simple(TYPE_IMX_EPIT, addr, irq);
> - pp = IMX_EPIT(dev);
> - pp->ccm = ccm;
> -}
> -
> -static inline
> -void imx_timerg_create(const hwaddr addr,
> - qemu_irq irq,
> - DeviceState *ccm)
> -{
> - IMXGPTState *pp;
> - DeviceState *dev;
> -
> - dev = sysbus_create_simple(TYPE_IMX_GPT, addr, irq);
> - pp = IMX_GPT(dev);
> - pp->ccm = ccm;
> -}
> -
> -#endif /* IMX_H */
> --
> 2.1.4
>
>
- [Qemu-devel] [PATCH v10 10/21] i.MX: Fix Coding style for EPIT emulator, (continued)
- [Qemu-devel] [PATCH v10 10/21] i.MX: Fix Coding style for EPIT emulator, Jean-Christophe Dubois, 2015/07/05
- [Qemu-devel] [PATCH v10 09/21] i.MX: Move Qdev EPIT construction helper as inline function., Jean-Christophe Dubois, 2015/07/05
- [Qemu-devel] [PATCH v10 11/21] i.MX: Split GPT emulator in a header file and a source file, Jean-Christophe Dubois, 2015/07/05
- [Qemu-devel] [PATCH v10 12/21] i.MX: Move Qdev GPT construction helper as inline function., Jean-Christophe Dubois, 2015/07/05
- [Qemu-devel] [PATCH v10 13/21] i.MX: Fix Coding style for GPT emulator, Jean-Christophe Dubois, 2015/07/05
- [Qemu-devel] [PATCH v10 14/21] i.MX: Add SOC support for i.MX31, Jean-Christophe Dubois, 2015/07/05
- [Qemu-devel] [PATCH v10 15/21] i.MX: KZM now uses the standalone i.MX31 SOC support, Jean-Christophe Dubois, 2015/07/05
- Re: [Qemu-devel] [PATCH v10 15/21] i.MX: KZM now uses the standalone i.MX31 SOC support,
Peter Crosthwaite <=
- [Qemu-devel] [PATCH v10 16/21] i.MX: Add I2C controller emulator, Jean-Christophe Dubois, 2015/07/05
- [Qemu-devel] [PATCH v10 17/21] i.MX: Add FEC Ethernet Emulator, Jean-Christophe Dubois, 2015/07/05
- [Qemu-devel] [PATCH v10 18/21] i.MX: Add SOC support for i.MX25, Jean-Christophe Dubois, 2015/07/05
- [Qemu-devel] [PATCH v10 19/21] i.MX: Add the i.MX25 3DS PDK plateform, Jean-Christophe Dubois, 2015/07/05