[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH 14/18] IPMI: Add a BT low-level interface
From: |
minyard |
Subject: |
[Qemu-devel] [PATCH 14/18] IPMI: Add a BT low-level interface |
Date: |
Thu, 19 Jul 2012 13:53:29 -0500 |
From: Corey Minyard <address@hidden>
This provides the simulation of the BT hardware interface for
IPMI.
Signed-off-by: Corey Minyard <address@hidden>
---
default-configs/i386-softmmu.mak | 1 +
default-configs/x86_64-softmmu.mak | 1 +
hw/Makefile.objs | 1 +
hw/ipmi_bt.c | 360 ++++++++++++++++++++++++++++++++++++
4 files changed, 363 insertions(+), 0 deletions(-)
create mode 100644 hw/ipmi_bt.c
diff --git a/default-configs/i386-softmmu.mak b/default-configs/i386-softmmu.mak
index b549389..f8f8e6d 100644
--- a/default-configs/i386-softmmu.mak
+++ b/default-configs/i386-softmmu.mak
@@ -10,6 +10,7 @@ CONFIG_VMMOUSE=y
CONFIG_IPMI=y
CONFIG_ISA_IPMI=y
CONFIG_IPMI_KCS=y
+CONFIG_IPMI_BT=y
CONFIG_SERIAL=y
CONFIG_PARALLEL=y
CONFIG_I8254=y
diff --git a/default-configs/x86_64-softmmu.mak
b/default-configs/x86_64-softmmu.mak
index af7d2a9..8c1177d 100644
--- a/default-configs/x86_64-softmmu.mak
+++ b/default-configs/x86_64-softmmu.mak
@@ -10,6 +10,7 @@ CONFIG_VMMOUSE=y
CONFIG_IPMI=y
CONFIG_ISA_IPMI=y
CONFIG_IPMI_KCS=y
+CONFIG_IPMI_BT=y
CONFIG_SERIAL=y
CONFIG_PARALLEL=y
CONFIG_I8254=y
diff --git a/hw/Makefile.objs b/hw/Makefile.objs
index 12cc9a2..c6f54fb 100644
--- a/hw/Makefile.objs
+++ b/hw/Makefile.objs
@@ -23,6 +23,7 @@ hw-obj-$(CONFIG_EMPTY_SLOT) += empty_slot.o
hw-obj-$(CONFIG_IPMI) += ipmi.o
hw-obj-$(CONFIG_ISA_IPMI) += isa_ipmi.o
hw-obj-$(CONFIG_IPMI_KCS) += ipmi_kcs.o
+hw-obj-$(CONFIG_IPMI_BT) += ipmi_bt.o
hw-obj-$(CONFIG_SERIAL) += serial.o
hw-obj-$(CONFIG_PARALLEL) += parallel.o
diff --git a/hw/ipmi_bt.c b/hw/ipmi_bt.c
new file mode 100644
index 0000000..530d2ae
--- /dev/null
+++ b/hw/ipmi_bt.c
@@ -0,0 +1,360 @@
+/*
+ * QEMU IPMI BT emulation
+ *
+ * Copyright (c) 2012 Corey Minyard, MontaVista Software, LLC
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+#include "hw.h"
+
+#include "ipmi.h"
+
+/* Control register */
+#define IPMI_BT_CLR_WR_BIT 0
+#define IPMI_BT_CLR_RD_BIT 1
+#define IPMI_BT_H2B_ATN_BIT 2
+#define IPMI_BT_B2H_ATN_BIT 3
+#define IPMI_BT_SMS_ATN_BIT 4
+#define IPMI_BT_HBUSY_BIT 6
+#define IPMI_BT_BBUSY_BIT 7
+
+#define IPMI_BT_CLR_WR_MASK (1 << IPMI_BT_CLR_WR_BIT)
+#define IPMI_BT_GET_CLR_WR(d) (((d) >> IPMI_BT_CLR_WR_BIT) & 0x1)
+#define IPMI_BT_SET_CLR_WR(d, v) (d) = (((d) & ~IPMI_BT_CLR_WR_MASK) | \
+ (((v & 1) << IPMI_BT_CLR_WR_BIT)))
+
+#define IPMI_BT_CLR_RD_MASK (1 << IPMI_BT_CLR_RD_BIT)
+#define IPMI_BT_GET_CLR_RD(d) (((d) >> IPMI_BT_CLR_RD_BIT) & 0x1)
+#define IPMI_BT_SET_CLR_RD(d, v) (d) = (((d) & ~IPMI_BT_CLR_RD_MASK) | \
+ (((v & 1) << IPMI_BT_CLR_RD_BIT)))
+
+#define IPMI_BT_H2B_ATN_MASK (1 << IPMI_BT_H2B_ATN_BIT)
+#define IPMI_BT_GET_H2B_ATN(d) (((d) >> IPMI_BT_H2B_ATN_BIT) & 0x1)
+#define IPMI_BT_SET_H2B_ATN(d, v) (d) = (((d) & ~IPMI_BT_H2B_ATN_MASK) | \
+ (((v & 1) << IPMI_BT_H2B_ATN_BIT)))
+
+#define IPMI_BT_B2H_ATN_MASK (1 << IPMI_BT_B2H_ATN_BIT)
+#define IPMI_BT_GET_B2H_ATN(d) (((d) >> IPMI_BT_B2H_ATN_BIT) & 0x1)
+#define IPMI_BT_SET_B2H_ATN(d, v) (d) = (((d) & ~IPMI_BT_B2H_ATN_MASK) | \
+ (((v & 1) << IPMI_BT_B2H_ATN_BIT)))
+
+#define IPMI_BT_SMS_ATN_MASK (1 << IPMI_BT_SMS_ATN_BIT)
+#define IPMI_BT_GET_SMS_ATN(d) (((d) >> IPMI_BT_SMS_ATN_BIT) & 0x1)
+#define IPMI_BT_SET_SMS_ATN(d, v) (d) = (((d) & ~IPMI_BT_SMS_ATN_MASK) | \
+ (((v & 1) << IPMI_BT_SMS_ATN_BIT)))
+
+#define IPMI_BT_HBUSY_MASK (1 << IPMI_BT_HBUSY_BIT)
+#define IPMI_BT_GET_HBUSY(d) (((d) >> IPMI_BT_HBUSY_BIT) & 0x1)
+#define IPMI_BT_SET_HBUSY(d, v) (d) = (((d) & ~IPMI_BT_HBUSY_MASK) | \
+ (((v & 1) << IPMI_BT_HBUSY_BIT)))
+
+#define IPMI_BT_BBUSY_MASK (1 << IPMI_BT_BBUSY_BIT)
+#define IPMI_BT_GET_BBUSY(d) (((d) >> IPMI_BT_BBUSY_BIT) & 0x1)
+#define IPMI_BT_SET_BBUSY(d, v) (d) = (((d) & ~IPMI_BT_BBUSY_MASK) | \
+ (((v & 1) << IPMI_BT_BBUSY_BIT)))
+
+
+/* Mask register */
+#define IPMI_BT_B2H_IRQ_EN_BIT 0
+#define IPMI_BT_B2H_IRQ_BIT 1
+
+#define IPMI_BT_B2H_IRQ_EN_MASK (1 << IPMI_BT_B2H_IRQ_EN_BIT)
+#define IPMI_BT_GET_B2H_IRQ_EN(d) (((d) >> IPMI_BT_B2H_IRQ_EN_BIT) & 0x1)
+#define IPMI_BT_SET_B2H_IRQ_EN(d, v) (d) = (((d) & ~IPMI_BT_B2H_IRQ_EN_MASK) |
\
+ (((v & 1) << IPMI_BT_B2H_IRQ_EN_BIT)))
+
+#define IPMI_BT_B2H_IRQ_MASK (1 << IPMI_BT_B2H_IRQ_BIT)
+#define IPMI_BT_GET_B2H_IRQ(d) (((d) >> IPMI_BT_B2H_IRQ_BIT) & 0x1)
+#define IPMI_BT_SET_B2H_IRQ(d, v) (d) = (((d) & ~IPMI_BT_B2H_IRQ_MASK) | \
+ (((v & 1) << IPMI_BT_B2H_IRQ_BIT)))
+
+typedef struct IPMIBtInterface {
+ IPMIInterface intf;
+ uint8_t control_reg;
+ uint8_t mask_reg;
+
+ /*
+ * This is a response number that we send with the command to make
+ * sure that the response matches the command.
+ */
+ uint8_t waiting_rsp;
+ uint8_t waiting_seq;
+} IPMIBtInterface;
+
+#define IPMI_CMD_GET_BT_INTF_CAP 0x36
+
+static void ipmi_bt_handle_event(IPMIInterface *s)
+{
+ IPMIBtInterface *bt = DO_UPCAST(IPMIBtInterface, intf, s);
+
+ ipmi_lock(s);
+ if (s->inlen < 4) {
+ goto out;
+ }
+ /* Note that overruns are handled by handle_command */
+ if (s->inmsg[0] != (s->inlen - 1)) {
+ /* Length mismatch, just ignore. */
+ IPMI_BT_SET_BBUSY(bt->control_reg, 1);
+ s->inlen = 0;
+ goto out;
+ }
+ if ((s->inmsg[1] == (IPMI_NETFN_APP << 2)) &&
+ (s->inmsg[3] == IPMI_CMD_GET_BT_INTF_CAP)) {
+ /* We handle this one ourselves. */
+ s->outmsg[0] = 9;
+ s->outmsg[1] = s->inmsg[1] | 0x04;
+ s->outmsg[2] = s->inmsg[2];
+ s->outmsg[3] = s->inmsg[3];
+ s->outmsg[4] = 0;
+ s->outmsg[5] = 1; /* Only support 1 outstanding request. */
+ if (sizeof(s->inmsg) > 0xff) { /* Input buffer size */
+ s->outmsg[6] = 0xff;
+ } else {
+ s->outmsg[6] = (unsigned char) sizeof(s->inmsg);
+ }
+ if (sizeof(s->outmsg) > 0xff) { /* Output buffer size */
+ s->outmsg[7] = 0xff;
+ } else {
+ s->outmsg[7] = (unsigned char) sizeof(s->outmsg);
+ }
+ s->outmsg[8] = 10; /* Max request to response time */
+ s->outmsg[9] = 0; /* Don't recommend retries */
+ s->outlen = 10;
+ IPMI_BT_SET_BBUSY(bt->control_reg, 0);
+ IPMI_BT_SET_B2H_ATN(bt->control_reg, 1);
+ if (s->use_irq && s->irqs_enabled &&
+ !IPMI_BT_GET_B2H_IRQ(bt->mask_reg) &&
+ IPMI_BT_GET_B2H_IRQ_EN(bt->mask_reg)) {
+ IPMI_BT_SET_B2H_IRQ(bt->mask_reg, 1);
+ qemu_irq_raise(s->irq);
+ }
+ goto out;
+ }
+ bt->waiting_seq = s->inmsg[2];
+ s->inmsg[2] = s->inmsg[1];
+ {
+ IPMIBmcClass *bk = IPMI_BMC_GET_CLASS(s->bmc);
+ bk->handle_command(s->bmc, s->inmsg + 2, s->inlen - 2,
sizeof(s->inmsg),
+ bt->waiting_rsp);
+ }
+ out:
+ ipmi_unlock(s);
+}
+
+static void ipmi_bt_handle_rsp(IPMIInterface *s, uint8_t msg_id,
+ unsigned char *rsp, unsigned int rsp_len)
+{
+ IPMIBtInterface *bt = DO_UPCAST(IPMIBtInterface, intf, s);
+
+ /* ipmi_lock is already claimed. */
+ if (bt->waiting_rsp == msg_id) {
+ bt->waiting_rsp++;
+ if (rsp_len > (sizeof(s->outmsg) - 2)) {
+ s->outmsg[0] = 4;
+ s->outmsg[1] = rsp[0];
+ s->outmsg[2] = bt->waiting_seq;
+ s->outmsg[3] = rsp[1];
+ s->outmsg[4] = IPMI_CC_CANNOT_RETURN_REQ_NUM_BYTES;
+ s->outlen = 5;
+ } else {
+ s->outmsg[0] = rsp_len + 1;
+ s->outmsg[1] = rsp[0];
+ s->outmsg[2] = bt->waiting_seq;
+ memcpy(s->outmsg + 3, rsp + 1, rsp_len - 1);
+ s->outlen = rsp_len + 2;
+ }
+ IPMI_BT_SET_BBUSY(bt->control_reg, 0);
+ IPMI_BT_SET_B2H_ATN(bt->control_reg, 1);
+ if (s->use_irq && s->irqs_enabled &&
+ !IPMI_BT_GET_B2H_IRQ(bt->mask_reg) &&
+ IPMI_BT_GET_B2H_IRQ_EN(bt->mask_reg)) {
+ IPMI_BT_SET_B2H_IRQ(bt->mask_reg, 1);
+ qemu_irq_raise(s->irq);
+ }
+ }
+}
+
+
+static uint32_t ipmi_bt_ioport_read(void *opaque, uint32_t addr)
+{
+ IPMIBtInterface *bt = opaque;
+ IPMIInterface *s = &bt->intf;
+ uint32_t ret = 0xff;
+
+ ipmi_lock(s);
+ switch (addr & 3) {
+ case 0:
+ ret = bt->control_reg;
+ break;
+ case 1:
+ if (s->outpos < s->outlen) {
+ ret = s->outmsg[s->outpos];
+ s->outpos++;
+ if (s->outpos == s->outlen) {
+ s->outpos = 0;
+ s->outlen = 0;
+ }
+ } else {
+ ret = 0xff;
+ }
+ break;
+ case 2:
+ ret = bt->mask_reg;
+ break;
+ }
+ ipmi_unlock(s);
+ return ret;
+}
+
+static void ipmi_bt_ioport_write(void *opaque, uint32_t addr, uint32_t val)
+{
+ IPMIBtInterface *bt = opaque;
+ IPMIInterface *s = &bt->intf;
+
+ ipmi_lock(s);
+ switch (addr & 3) {
+ case 0:
+ if (IPMI_BT_GET_CLR_WR(val)) {
+ s->inlen = 0;
+ }
+ if (IPMI_BT_GET_CLR_RD(val)) {
+ s->outpos = 0;
+ }
+ if (IPMI_BT_GET_B2H_ATN(val)) {
+ IPMI_BT_SET_B2H_ATN(bt->control_reg, 0);
+ }
+ if (IPMI_BT_GET_SMS_ATN(val)) {
+ IPMI_BT_SET_SMS_ATN(bt->control_reg, 0);
+ }
+ if (IPMI_BT_GET_HBUSY(val)) {
+ /* Toggle */
+ IPMI_BT_SET_HBUSY(bt->control_reg,
+ !IPMI_BT_GET_HBUSY(bt->control_reg));
+ }
+ if (IPMI_BT_GET_H2B_ATN(val)) {
+ IPMI_BT_SET_BBUSY(bt->control_reg, 1);
+ ipmi_signal(s);
+ }
+ break;
+
+ case 1:
+ if (s->inlen < sizeof(s->inmsg)) {
+ s->inmsg[s->inlen] = val;
+ }
+ s->inlen++;
+ break;
+
+ case 2:
+ if (IPMI_BT_GET_B2H_IRQ_EN(val) !=
+ IPMI_BT_GET_B2H_IRQ_EN(bt->mask_reg)) {
+ if (IPMI_BT_GET_B2H_IRQ_EN(val)) {
+ if (IPMI_BT_GET_B2H_ATN(bt->control_reg) ||
+ IPMI_BT_GET_SMS_ATN(bt->control_reg)) {
+ IPMI_BT_SET_B2H_IRQ(bt->mask_reg, 1);
+ qemu_irq_raise(s->irq);
+ }
+ IPMI_BT_SET_B2H_IRQ_EN(bt->mask_reg, 1);
+ } else {
+ if (IPMI_BT_GET_B2H_IRQ(bt->mask_reg)) {
+ IPMI_BT_SET_B2H_IRQ(bt->mask_reg, 0);
+ qemu_irq_lower(s->irq);
+ }
+ IPMI_BT_SET_B2H_IRQ_EN(bt->mask_reg, 0);
+ }
+ }
+ if (IPMI_BT_GET_B2H_IRQ(val) && IPMI_BT_GET_B2H_IRQ(bt->mask_reg)) {
+ IPMI_BT_SET_B2H_IRQ(bt->mask_reg, 0);
+ qemu_irq_lower(s->irq);
+ }
+ break;
+ }
+ ipmi_unlock(s);
+}
+
+static const MemoryRegionPortio ipmi_bt_portio[] = {
+ { 0, 3, 1, .read = ipmi_bt_ioport_read, .write = ipmi_bt_ioport_write },
+ PORTIO_END_OF_LIST()
+};
+
+static const MemoryRegionOps ipmi_bt_io_ops = {
+ .old_portio = ipmi_bt_portio
+};
+
+static void ipmi_bt_set_atn(IPMIInterface *s, int val, int irq)
+{
+ IPMIBtInterface *bt = DO_UPCAST(IPMIBtInterface, intf, s);
+
+ if (!!val == IPMI_BT_GET_SMS_ATN(bt->control_reg)) {
+ return;
+ }
+
+ IPMI_BT_SET_SMS_ATN(bt->control_reg, val);
+ if (val) {
+ if (irq && s->use_irq && s->irqs_enabled &&
+ !IPMI_BT_GET_B2H_ATN(bt->control_reg) &&
+ IPMI_BT_GET_B2H_IRQ_EN(bt->mask_reg)) {
+ IPMI_BT_SET_B2H_IRQ(bt->mask_reg, 1);
+ qemu_irq_raise(s->irq);
+ }
+ } else {
+ if (!IPMI_BT_GET_B2H_ATN(bt->control_reg) &&
+ IPMI_BT_GET_B2H_IRQ(bt->mask_reg)) {
+ IPMI_BT_SET_B2H_IRQ(bt->mask_reg, 0);
+ qemu_irq_lower(s->irq);
+ }
+ }
+}
+
+static int ipmi_bt_init(IPMIInterface *s)
+{
+ if (!s->io_base) {
+ s->io_base = 0xe4;
+ }
+ s->io_length = 3;
+
+ memory_region_init_io(&s->io, &ipmi_bt_io_ops,
+ DO_UPCAST(IPMIBtInterface, intf, s), "ipmi-bt", 3);
+
+ return 0;
+}
+
+static void ipmi_bt_class_init(ObjectClass *klass, void *data)
+{
+ IPMIInterfaceClass *k = IPMI_INTERFACE_CLASS(klass);
+
+ k->init = ipmi_bt_init;
+ k->smbios_type = IPMI_SMBIOS_BT;
+ k->set_atn = ipmi_bt_set_atn;
+ k->handle_rsp = ipmi_bt_handle_rsp;
+ k->handle_if_event = ipmi_bt_handle_event;
+}
+
+static TypeInfo ipmi_bt_type = {
+ .name = "ipmi-interface-bt",
+ .parent = TYPE_IPMI_INTERFACE,
+ .instance_size = sizeof(IPMIBtInterface),
+ .class_init = ipmi_bt_class_init,
+};
+
+static void ipmi_bt_register_types(void)
+{
+ type_register_static(&ipmi_bt_type);
+}
+
+type_init(ipmi_bt_register_types)
--
1.7.4.1
- Re: [Qemu-devel] [PATCH 09/18] qdev: Add a pre-firmware init capability, (continued)
- [Qemu-devel] [PATCH 05/18] qemu-char: Allow a chardev to reconnect if disconnected, minyard, 2012/07/19
- [Qemu-devel] [PATCH 11/18] Add a base IPMI interface, minyard, 2012/07/19
- [Qemu-devel] [PATCH 03/18] vl: Move init_timer_alarm() earlier, minyard, 2012/07/19
- [Qemu-devel] [PATCH 02/18] pc: move SMBIOS setup to after device init, minyard, 2012/07/19
- [Qemu-devel] [PATCH 14/18] IPMI: Add a BT low-level interface,
minyard <=
- [Qemu-devel] [PATCH 18/18] IPMI: Add documentation., minyard, 2012/07/19
- [Qemu-devel] [PATCH 12/18] IPMI: Add a PC ISA type structure, minyard, 2012/07/19
- [Qemu-devel] [PATCH 17/18] IPMI: Add tests, minyard, 2012/07/19
- [Qemu-devel] [PATCH 08/18] qemu-char: Close fd at end of file, minyard, 2012/07/19
- [Qemu-devel] [PATCH 16/18] IPMI: Add an external connection simulation interface, minyard, 2012/07/19
- [Qemu-devel] [PATCH 13/18] IPMI: Add a KCS low-level interface, minyard, 2012/07/19
- [Qemu-devel] [PATCH 15/18] IPMI: Add a local BMC simulation, minyard, 2012/07/19
- Re: [Qemu-devel] Third shot at adding IPMI to qemu, Paolo Bonzini, 2012/07/20