Re: [Protux-devel] protux hangs during soundcard detection.

[Remon Sijrier]

Just a hint,

The last time I saw your output, you seemed to use plughw. Now your MADM is 
using the "hw" device. Change "tryPlughw = no" in MADM into "tryPlughw = 
yes", or wait until Luciano has made it read from GlobalProperties. Seems 
that many sound-cards needs specific values to get to work with the "hw" 
device. Actually its ALSA who needs those values, else it doesn't work.

Remon



On Sunday 05 October 2003 22:54, address@hidden wrote:
> On Saturday 27 September 2003 12:31 am, booker wrote:
> > Am Donnerstag, 25. September 2003 03:45 schrieb Luciano Giordana:
> > > I think I found a bug that was causing it, besides the artsd stuff.
> > > Please update MADM.
> >
> > Yes, you managed it ... protux is running! :-)
> >
> > greetings
> > Reinhard
>
> Ok, since this was fixed on my other machine using a creative
> soundblaster128 (no emu chip, just a es1371)  ....
>
> address@hidden protux-0.19.5]$ lspcidrake -v | fgrep AUDIO
> es1371          : Ensoniq|CT5880 [MULTIMEDIA_AUDIO] (vendor:1274
> device:5880 subv:1274 subd:2000)
>
>
> .... I can start protux, but can't choose a bus, because there are no one
> available!
> So I will show you the shell output below:
> .....
> LEAVING MustuxAudioBus.cc::valid_mode
> [ --- Summary of all valid bus for this project ( 44100 Hz , STEREO, 16
> bits --- ]
> [ --- Buses not listed on this summary will be disable for this project ---
> ] LEAVING Mixer (CONSTRUCTOR)
> ......
>
>
>
>
> But MADM seems to find my card, right?
>
>
> ENTERING MustuxAudioDeviceMapper.cc::init
>          [ Found ALSA supported Card : ENS1371 - Ensoniq AudioPCI ]
>          [ PLABACK Bus 0 [ card 0 ] : "ENS1371 - 1st OUT (hw:0,1)" created
> ] [ PLABACK Bus 1 [ card 0 ] : "ENS1371 - 2nd OUT (hw:0,0)" created ] [
> MustuxAudioDeviceMapper::CAPTURE Bus 0 [ card 0 ] : "ENS1371 - 1st IN
> (hw:0,0)" created ]
>
>
>
>
> And ...Probing CAPTURE Buses shows this .....
>
>
>
> [ Probing CAPTURE Buses ------------------------------------------------ ]
>          ENTERING MustuxAudioBus.cc::probe_valid_modes
>             [ Probing valid modes for bus hw:0,0 ... ]
>             [   Trying 22050 Hz MONO 16 bits :  FAILED :
> ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
>             [   Trying 32000 Hz MONO 16 bits :  OK ]
>             [   Trying 44100 Hz MONO 16 bits :  FAILED :
> ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
>             [   Trying 44100 Hz MONO 20 bits :  FAILED :
> ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
>             [   Trying 44100 Hz MONO 24 bits :  FAILED :
> ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
>             [   Trying 44100 Hz MONO 32 bits :  FAILED :
> ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
>             [   Trying 44100 Hz MONO 32 bits :  FAILED :
> ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
>             [   Trying 44100 Hz MONO 64 bits :  FAILED :
> ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
>             [   Trying 48000 Hz MONO 16 bits :  OK ]
>             [   Trying 48000 Hz MONO 20 bits :  FAILED :
> ERROR_BUS_DOES_NOT_SUPPORT_THIS_BIT_DEPTH ]
>             [   Trying 48000 Hz MONO 24 bits :  FAILED :
> ERROR_BUS_DOES_NOT_SUPPORT_THIS_BIT_DEPTH ]
>             [   Trying 48000 Hz MONO 32 bits :  FAILED :
> ERROR_BUS_DOES_NOT_SUPPORT_THIS_BIT_DEPTH ]
>             [   Trying 48000 Hz MONO 64 bits :  FAILED :
> ERROR_BUS_DOES_NOT_SUPPORT_THIS_BIT_DEPTH ]
>             [   Trying 48000 Hz MONO 16 bits :  OK ]
>             [   Trying 96000 Hz MONO 20 bits :  FAILED :
> ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
>             [   Trying 96000 Hz MONO 24 bits :  FAILED :
> ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
>             [   Trying 96000 Hz MONO 32 bits :  FAILED :
> ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
>             [   Trying 96000 Hz MONO 64 bits :  FAILED :
> ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
>             [   Trying 22050 Hz STEREO 16 bits :  FAILED :
> ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
>             [   Trying 32000 Hz STEREO 16 bits :  OK ]
>             [   Trying 44100 Hz STEREO 16 bits :  FAILED :
> ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
>             [   Trying 44100 Hz STEREO 20 bits :  FAILED :
> ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
>             [   Trying 44100 Hz STEREO 24 bits :  FAILED :
> ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
>             [   Trying 44100 Hz STEREO 32 bits :  FAILED :
> ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
>             [   Trying 44100 Hz STEREO 32 bits :  FAILED :
> ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
>             [   Trying 44100 Hz STEREO 64 bits :  FAILED :
> ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
>             [   Trying 48000 Hz STEREO 16 bits :  OK ]
>             [   Trying 48000 Hz STEREO 20 bits :  FAILED :
> ERROR_BUS_DOES_NOT_SUPPORT_THIS_BIT_DEPTH ]
>             [   Trying 48000 Hz STEREO 24 bits :  FAILED :
> ERROR_BUS_DOES_NOT_SUPPORT_THIS_BIT_DEPTH ]
>             [   Trying 48000 Hz STEREO 32 bits :  FAILED :
> ERROR_BUS_DOES_NOT_SUPPORT_THIS_BIT_DEPTH ]
>             [   Trying 48000 Hz STEREO 64 bits :  FAILED :
> ERROR_BUS_DOES_NOT_SUPPORT_THIS_BIT_DEPTH ]
>             [   Trying 48000 Hz STEREO 16 bits :  OK ]
>             [   Trying 96000 Hz STEREO 20 bits :  FAILED :
> ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
>             [   Trying 96000 Hz STEREO 24 bits :  FAILED :
> ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
>             [   Trying 96000 Hz STEREO 32 bits :  FAILED :
> ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
>             [   Trying 96000 Hz STEREO 64 bits :  FAILED :
> ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
>          LEAVING MustuxAudioBus.cc::probe_valid_modes
>
>
> Does that mean this card can't support 44100Hz, 16 bit ?
>
> However ... I switched the sample rate <SP> to 48000 Hz and it works (also
> recording) although there is still no bus available in [BN] or [VB] ... is
> this ok?
>
> greetings
> Reinhard
>
>
> _______________________________________________
> Protux-devel mailing list
> address@hidden
> http://mail.nongnu.org/mailman/listinfo/protux-devel