Re: [Protux-devel] protux hangs during soundcard detection.

[address@hidden]

On Saturday 27 September 2003 12:31 am, booker wrote:
> Am Donnerstag, 25. September 2003 03:45 schrieb Luciano Giordana:
> > I think I found a bug that was causing it, besides the artsd stuff.
> > Please update MADM.
>
> Yes, you managed it ... protux is running! :-)
>
> greetings
> Reinhard


Ok, since this was fixed on my other machine using a creative soundblaster128 
(no emu chip, just a es1371)  ....

address@hidden protux-0.19.5]$ lspcidrake -v | fgrep AUDIO
es1371          : Ensoniq|CT5880 [MULTIMEDIA_AUDIO] (vendor:1274 device:5880 
subv:1274 subd:2000)


.... I can start protux, but can't choose a bus, because there are no one 
available!
So I will show you the shell output below:
.....
LEAVING MustuxAudioBus.cc::valid_mode
[ --- Summary of all valid bus for this project ( 44100 Hz , STEREO, 16 bits 
--- ]
[ --- Buses not listed on this summary will be disable for this project --- ]
LEAVING Mixer (CONSTRUCTOR)
......




But MADM seems to find my card, right?


ENTERING MustuxAudioDeviceMapper.cc::init
         [ Found ALSA supported Card : ENS1371 - Ensoniq AudioPCI ]
         [ PLABACK Bus 0 [ card 0 ] : "ENS1371 - 1st OUT (hw:0,1)" created ]
         [ PLABACK Bus 1 [ card 0 ] : "ENS1371 - 2nd OUT (hw:0,0)" created ]
         [ MustuxAudioDeviceMapper::CAPTURE Bus 0 [ card 0 ] : "ENS1371 - 1st 
IN (hw:0,0)" created ]




And ...Probing CAPTURE Buses shows this .....



[ Probing CAPTURE Buses ------------------------------------------------ ]
         ENTERING MustuxAudioBus.cc::probe_valid_modes
            [ Probing valid modes for bus hw:0,0 ... ]
            [   Trying 22050 Hz MONO 16 bits :  FAILED : 
ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
            [   Trying 32000 Hz MONO 16 bits :  OK ]
            [   Trying 44100 Hz MONO 16 bits :  FAILED : 
ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
            [   Trying 44100 Hz MONO 20 bits :  FAILED : 
ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
            [   Trying 44100 Hz MONO 24 bits :  FAILED : 
ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
            [   Trying 44100 Hz MONO 32 bits :  FAILED : 
ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
            [   Trying 44100 Hz MONO 32 bits :  FAILED : 
ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
            [   Trying 44100 Hz MONO 64 bits :  FAILED : 
ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
            [   Trying 48000 Hz MONO 16 bits :  OK ]
            [   Trying 48000 Hz MONO 20 bits :  FAILED : 
ERROR_BUS_DOES_NOT_SUPPORT_THIS_BIT_DEPTH ]
            [   Trying 48000 Hz MONO 24 bits :  FAILED : 
ERROR_BUS_DOES_NOT_SUPPORT_THIS_BIT_DEPTH ]
            [   Trying 48000 Hz MONO 32 bits :  FAILED : 
ERROR_BUS_DOES_NOT_SUPPORT_THIS_BIT_DEPTH ]
            [   Trying 48000 Hz MONO 64 bits :  FAILED : 
ERROR_BUS_DOES_NOT_SUPPORT_THIS_BIT_DEPTH ]
            [   Trying 48000 Hz MONO 16 bits :  OK ]
            [   Trying 96000 Hz MONO 20 bits :  FAILED : 
ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
            [   Trying 96000 Hz MONO 24 bits :  FAILED : 
ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
            [   Trying 96000 Hz MONO 32 bits :  FAILED : 
ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
            [   Trying 96000 Hz MONO 64 bits :  FAILED : 
ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
            [   Trying 22050 Hz STEREO 16 bits :  FAILED : 
ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
            [   Trying 32000 Hz STEREO 16 bits :  OK ]
            [   Trying 44100 Hz STEREO 16 bits :  FAILED : 
ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
            [   Trying 44100 Hz STEREO 20 bits :  FAILED : 
ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
            [   Trying 44100 Hz STEREO 24 bits :  FAILED : 
ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
            [   Trying 44100 Hz STEREO 32 bits :  FAILED : 
ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
            [   Trying 44100 Hz STEREO 32 bits :  FAILED : 
ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
            [   Trying 44100 Hz STEREO 64 bits :  FAILED : 
ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
            [   Trying 48000 Hz STEREO 16 bits :  OK ]
            [   Trying 48000 Hz STEREO 20 bits :  FAILED : 
ERROR_BUS_DOES_NOT_SUPPORT_THIS_BIT_DEPTH ]
            [   Trying 48000 Hz STEREO 24 bits :  FAILED : 
ERROR_BUS_DOES_NOT_SUPPORT_THIS_BIT_DEPTH ]
            [   Trying 48000 Hz STEREO 32 bits :  FAILED : 
ERROR_BUS_DOES_NOT_SUPPORT_THIS_BIT_DEPTH ]
            [   Trying 48000 Hz STEREO 64 bits :  FAILED : 
ERROR_BUS_DOES_NOT_SUPPORT_THIS_BIT_DEPTH ]
            [   Trying 48000 Hz STEREO 16 bits :  OK ]
            [   Trying 96000 Hz STEREO 20 bits :  FAILED : 
ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
            [   Trying 96000 Hz STEREO 24 bits :  FAILED : 
ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
            [   Trying 96000 Hz STEREO 32 bits :  FAILED : 
ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
            [   Trying 96000 Hz STEREO 64 bits :  FAILED : 
ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
         LEAVING MustuxAudioBus.cc::probe_valid_modes


Does that mean this card can't support 44100Hz, 16 bit ?

However ... I switched the sample rate <SP> to 48000 Hz and it works (also 
recording) although there is still no bus available in [BN] or [VB] ... is 
this ok?

greetings
Reinhard