Message: 1
Date: Tue, 11 Oct 2011 18:18:34 +0300
From: Tasos Sagiotis<address@hidden>
To: address@hidden
Subject: [Paparazzi-devel] Can't use manual mode
Message-ID:<address@hidden>
Content-Type: text/plain; charset="iso-8859-1"; Format="flowed"
Hello,
I use a Tiny v2.11 autopilot wired according to this diagram
<http://paparazzi.enac.fr/wiki/Image:Diagram.png>. I am using the PPM
method with a Futaba T6EXAP transmiter (radio) and a Futaba R136F
Receiver. The autopilot works fine at the AUTO 2 mode with the PPM's LED
staying constantly on. When powering on the transmiter, the PPM's LED
works as expected blinking at 3Hz but I can't turn to manual mode nor
with the 3-possition switch nor by turning to manual mode via the CGS.
The servo wont do anything when I am moving the transmiter' s sticks.
Any ideas?
-------------- next part --------------
An HTML attachment was scrubbed...
URL:<https://lists.nongnu.org/archive/html/paparazzi-devel/attachments/20111011/c2e2b87d/attachment.html>
------------------------------
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
End of Paparazzi-devel Digest, Vol 91, Issue 32
***********************************************