[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: RE: [MXE-Octave]Build Failed on CentOS6.6 64bit
From: |
Yuji.I |
Subject: |
Re: RE: [MXE-Octave]Build Failed on CentOS6.6 64bit |
Date: |
Sun, 14 Jun 2015 19:29:33 -0700 (PDT) |
tmacchant wrote
> ----- Original Message -----
>
>> From: Yuji.I
>> To: octave-maintainers> Cc:
>> Date: 2015/6/15, Mon 10:28
>> Subject: RE: RE: [MXE-Octave]Build Failed on CentOS6.6 64bit
>>
>> JohnD wrote
>>>> -----Original Message-----
>>>> From: Tatsuro MATSUOKA [mailto:
>>
>>> address@hidden
>>
>>> ]
>>>> Sent: Sunday, June 14, 2015 2:12 AM
>>>> To: JohnD;
>>
>>> octave-maintainers@
>>
>>> ; 'Yuji.I'
>>>> Subject: Re: RE: [MXE-Octave]Build Failed on CentOS6.6 64bit
>>>>
>>>> ----- Original Message -----
>>>>
>>>> > From: JohnD
>>>> > To: octave-maintainers 'Yuji.I'
>>>> > Cc:
>>>> > Date: 2015/6/13, Sat 02:38
>>>> > Subject: RE: RE: [MXE-Octave]Build Failed on CentOS6.6 64bit
>>>> >
>>>> >>
>>>> >> Message: 2
>>>> >> Date: Fri, 12 Jun 2015 07:43:11 -0700 (PDT)
>>>> >> From: "Yuji.I" <
>>
>>> using923@
>>
>>> >
>>>> >> To:
>>
>>> octave-maintainers@
>>
>>>> >> Subject: RE: [MXE-Octave]Build Failed on CentOS6.6 64bit
>>>> >> Message-ID: <
>>
>>> address@hidden
>>
>>>>
>>>> >> Content-Type: text/plain; charset=us-ascii
>>>> >>
>>>> >> this is config.log
>>>> >>
>> <http://octave.1599824.n4.nabble.com/file/n4670862/config.log>
>>>> in
>>>> >> tmp-gnutls/gnutls-3.3.15/
>>>> >>
>>>> >>
>>>> >
>>>> > Still doesn't look like it is picking up the path for pkg
>> config files.
>>>> > This is still running with the change to Makefile.in ?
>>>> >
>>>> > In src/gnutls.mk, modify line 42 to be cd '$(1)'
>> &&
>>>> > PKG_CONFIG_PATH='$(HOST_LIBDIR)/pkgconfig'
>>>> > ./configure \
>>>> >
>>>>
>>>> Find where your nettle.pc is e.g.
>>>>
>>>> $ locate nettle.pc
>>>>
>>>> Perhaps two versions of libnettle are installed on your PC.
>>>> Specify which nettle.pc is for ver. 2.7 and set PKG_CONFIG_PATH
>>>>
>>>> $ export PKG_CONFIG_PATH=(path ver. 2.7 nettle.pc exist
>>>> ):$PKG_CONFIG_PATH (assuming bash shell)
>>>>
>>>> and try mxe-octave.
>>>>
>>>> Tatsuro
>>>
>>> The correct version of nettle should be installed in
>>> '$(HOST_LIBDIR)/pkgconfig' as part of the build rule from
>> nettle.mk, so
>>> should probally check that it was indeed installed :)
>>>
>>> export PKG_CONFIG_PATH probably wont work, as part of the makefile.in
>>> unexports a number of exports as they either may conflict with mxe
>>> tools
>>> or
>>> are set in Makefile.in
>>
>> Thank you for advice,
>> and Sorry for the late reply...It has installed Libnettle2.7.1, but it
>> can't find it.
>
>>
>> I tried modified line 42 to be
>> cd '$(1)' && PKG_CONFIG_PATH='$(HOST_LIBDIR)/pkgconfig'
>> ./configure \
>> but it falied with the same error.
>>
>> I make sure that there is libnettle.so in mxe-octave/usr/lib64/ .
>>
>
>
>> I make sure that there is libnettle.so in mxe-octave/usr/lib64/ .
>
> The problem comes from pkg-config detection so that you have to find also
> nettle.pc.
>
>
> You wrote in the first post:
>> It has installed Libnettle2.7.1, but it can't find it.
>
>
> If you install Libnettle2.7.1 with "dev" tools, you must have nettle.pc
> for libnettle 2.7.1 in appropriate place.
>
> If you cannot find nettle.pc for Libnettle2.7.1, your installation of
> Libnettle2.7.1 failed
> and it might be origin of the error.
>
> Tatsuro
>
> Tatsuro
> You wrote in the first post:
>> It has installed Libnettle2.7.1, but it can't find it.
Sorry, I wrote misleading sentence.
I wrote "It" means "MXE-Octave".
I installed nettle and nettle-devel on system by yum before I sent this
forum.
however, those have no influence on this matter.
I guess the cause is environmental variable in MXE-Octave
or unsuitable Makefile (and *.mk files) for CentOS6.6.
--
View this message in context:
http://octave.1599824.n4.nabble.com/MXE-Octave-Build-Failed-on-CentOS6-6-64bit-tp4670812p4670927.html
Sent from the Octave - Maintainers mailing list archive at Nabble.com.
- RE: [MXE-Octave]Build Failed on CentOS6.6 64bit, (continued)
- Re: RE: [MXE-Octave]Build Failed on CentOS6.6 64bit, address@hidden, 2015/06/12
- RE: [MXE-Octave]Build Failed on CentOS6.6 64bit, JohnD, 2015/06/12
- RE: RE: [MXE-Octave]Build Failed on CentOS6.6 64bit, JohnD, 2015/06/12
- Re: RE: [MXE-Octave]Build Failed on CentOS6.6 64bit, Tatsuro MATSUOKA, 2015/06/14
- RE: RE: [MXE-Octave]Build Failed on CentOS6.6 64bit, JohnD, 2015/06/14
- RE: RE: [MXE-Octave]Build Failed on CentOS6.6 64bit, Yuji.I, 2015/06/14
- Re: RE: [MXE-Octave]Build Failed on CentOS6.6 64bit, Tatsuro MATSUOKA, 2015/06/14
- Re: RE: [MXE-Octave]Build Failed on CentOS6.6 64bit,
Yuji.I <=
- Re: RE: [MXE-Octave]Build Failed on CentOS6.6 64bit, Tatsuro MATSUOKA, 2015/06/14
- Re: RE: [MXE-Octave]Build Failed on CentOS6.6 64bit, Tatsuro MATSUOKA, 2015/06/15
- Re: RE: [MXE-Octave]Build Failed on CentOS6.6 64bit, Yuji.I, 2015/06/15
- Re: RE: [MXE-Octave]Build Failed on CentOS6.6 64bit, Tatsuro MATSUOKA, 2015/06/15
- Re: RE: [MXE-Octave]Build Failed on CentOS6.6 64bit, Yuji.I, 2015/06/16
- Re: RE: [MXE-Octave]Build Failed on CentOS6.6 64bit, Tatsuro MATSUOKA, 2015/06/17
- RE: [MXE-Octave]Build Failed on CentOS6.6 64bit, tmacchant, 2015/06/17
- Re: RE: [MXE-Octave]Build Failed on CentOS6.6 64bit, Tatsuro MATSUOKA, 2015/06/17
- Re: RE: [MXE-Octave]Build Failed on CentOS6.6 64bit, tmacchant, 2015/06/18
- Re: [MXE-Octave]Build Failed on CentOS6.6 64bit, John W. Eaton, 2015/06/18