[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[lwip-users] Re: [lwip] SLIP support in Windows
From: |
Fabio Fumi |
Subject: |
[lwip-users] Re: [lwip] SLIP support in Windows |
Date: |
Thu, 09 Jan 2003 00:01:34 -0000 |
My problem is that even before the first AT command, a
string of some repeated characters (something like
'±±±±±±±ááááááá...') is sent to the modem, as a
start-up handshake procedure, I guess. If the modem
dosen't answer to that, the connection is stopped with
a message like 'modem not responding'. What should be
the answer to that string? A simple \r is enough? Did
you have such a problem? Thanks.
bye
Fabio
--- James Roth <address@hidden> ha scritto: >
> I just humor windows with an OK\r reply to most
> commands. Windows
> sends the AT... command followed by a \r. The ATDT
> command or the
> CLIENT string (with no \r) cause me to go into SLIP
> mode. I also put
> delays in the AT code for realism.
>
> while (1)
> {
> if (got ATDT...)
> {
> write ("CONNECT\r")
> break;
> }
> else if (got AT...) /* an AT other than ATDT */
> {
> write ("OK\r")
> }
> else if (got CLIENT)
> {
> write ("CLIENTSERVER")
> break;
> }
> }
>
> do_slip()
>
> Good luck!
>
> --
> James Roth
> Shugyo Design Technologies
> http://www.shugyodesign.com/
>
>
>
> [This message was sent through the lwip discussion
list.]
______________________________________________________________________
Iscriviti al Club Nokia, è gratis!
http://it.yahoo.com/mail_it/foot/?http://www.club.nokia.it/
[This message was sent through the lwip discussion list.]
- [lwip-users] Re: [lwip] SLIP support in Windows, Adam Dunkels, 2003/01/08
- [lwip-users] Re: [lwip] SLIP support in Windows, Conny Öhult, 2003/01/08
- [lwip-users] Re: [lwip] SLIP support in Windows, James Roth, 2003/01/08
- [lwip-users] Re: [lwip] SLIP support in Windows, Conny Öhult, 2003/01/08
- [lwip-users] Re: [lwip] SLIP support in Windows, Fabio Fumi, 2003/01/08
- [lwip-users] Re: [lwip] SLIP support in Windows, Conny Öhult, 2003/01/08
- [lwip-users] Re: [lwip] SLIP support in Windows, Conny Öhult, 2003/01/08
- [lwip-users] Re: [lwip] SLIP support in Windows, Fabio Fumi, 2003/01/08
- [lwip-users] Re: [lwip] SLIP support in Windows, Fabio Fumi, 2003/01/08
- [lwip-users] Re: [lwip] SLIP support in Windows,
Fabio Fumi <=
- [lwip-users] Re: [lwip] SLIP support in Windows, Fabio Fumi, 2003/01/09
- [lwip-users] Re: [lwip] SLIP support in Windows, James Roth, 2003/01/09
- [lwip-users] Re: [lwip] SLIP support in Windows, Phil Dempster, 2003/01/09
- [lwip-users] Re: [lwip] SLIP support in Windows, Conny Öhult, 2003/01/09
- [lwip-users] Re: [lwip] SLIP support in Windows, James Roth, 2003/01/09
- [lwip-users] Re: [lwip] SLIP support in Windows, James Roth, 2003/01/09
- [lwip-users] Re: [lwip] SLIP support in Windows, James Roth, 2003/01/09