RE: [Ltib] Alsaconfig ptoblem with Ubuntu

[Kevin Wells]

Hi Claudio,

ALSA works fine for playback, record, and mixing. So use it regardless of
what the documentation says! :) Be sure to create your alsa device nodes
in /dev/snd if using static device nodes.

Hi Stuart,

> > BTW: this BSP platform builds the kernel every time and asks for
> > configuration, I'm not sure if this is desirable?  If the maintainer for
> > that platform is reading, please consider changing this.
This is an undesirable side effect from too much development work. I'll
remove this - thanks!

Kevin
tft

> Subject: Re: [Ltib] Alsaconfig ptoblem with Ubuntu
> 
> Thanks stuart.
> 
> I will check this, but is that the manual at NXP was saying not to use
> ALSA
> anyway, thank you for help.
> 
> Regards
> Claudio Borges.
> 
> Stuart Hughes wrote:
> > Hi Claudio,
> >
> > I've checked in a change to alsa-utils.spec that fixes this by adding
> > --disable-nls to configure.
> >
> > BTW: this BSP platform builds the kernel every time and asks for
> > configuration, I'm not sure if this is desirable?  If the maintainer for
> > that platform is reading, please consider changing this.
> >
> > Regards, Stuart
> >
> > Claudio wrote:
> >
> >> Hi Stuart i building for PHYCOM LPC3250 (NXP).
> >>
> >> I remove ALSA from LTIB configure and worked well
> >>
> >> Thanks for help.
> >> Regards, Claudio
> >>
> >>
> >> Stuart Hughes wrote:
> >>
> >>> Hi Claudio,
> >>>
> >>> I forgot to ask, what platform are you building for?
> >>>
> >>> I just tried a build on imx27 and it was okay (DreamLinux-3.5 (Debian
> >>> Lenny) single core machine).  It looks to me like a it may be a
> >>> parallel make issue (needing -j1 in the make line).
> >>>
> >>> Regards, Stuart
> >>>
> >>> Claudio wrote:
> >>>
> >>>
> >>>> Hi Stuart,
> >>>>
> >>>> Believe I'm using the latest version of LTIB, because I got the
> >>>> version from CVS yesterday (19/02).
> >>>>
> >>>> Regards.
> >>>>
> >>>> Stuart Hughes wrote:
> >>>>
> >>>>
> >>>>> Hi Claudio,
> >>>>>
> >>>>> Which version of LTIB are you running? (where's it from).
> >>>>>
> >>>>> Regards, Stuart
> >>>>>
> >>>>> Claudio wrote:
> >>>>>
> >>>>>
> >>>>>
> >>>>>> I´m running Ubuntu 9.10 and in the mornig i start to install ltib,
> >>>>>> but now apper a error:
> >>>>>>
> >>>>>> make[1]: Leaving directory
> >>>>>> `/home/claudio/ltib/rpm/BUILD/alsa-utils-1.0.11rc2/include'
> >>>>>> Making all in alsactl
> >>>>>> make[1]: Entering directory
> >>>>>> `/home/claudio/ltib/rpm/BUILD/alsa-utils-1.0.11rc2/alsactl'
> >>>>>> make[1]: Nothing to be done for `all'.
> >>>>>> make[1]: Leaving directory
> >>>>>> `/home/claudio/ltib/rpm/BUILD/alsa-utils-1.0.11rc2/alsactl'
> >>>>>> Making all in alsaconf
> >>>>>> make[1]: Entering directory
> >>>>>> `/home/claudio/ltib/rpm/BUILD/alsa-utils-1.0.11rc2/alsaconf'
> >>>>>> Making all in po
> >>>>>> make[2]: Entering directory
> >>>>>> `/home/claudio/ltib/rpm/BUILD/alsa-utils-1.0.11rc2/alsaconf/po'
> >>>>>> mv: cannot stat `t-ru.gmo': No such file or directory
> >>>>>> make[2]: *** [ru.gmo] Error 1
> >>>>>> make[2]: *** Waiting for unfinished jobs....
> >>>>>> mv: cannot stat `t-ja.gmo': No such file or directory
> >>>>>> make[2]: *** [ja.gmo] Error 1
> >>>>>> make[2]: Leaving directory
> >>>>>> `/home/claudio/ltib/rpm/BUILD/alsa-utils-1.0.11rc2/alsaconf/po'
> >>>>>> make[1]: *** [all-recursive] Error 1
> >>>>>> make[1]: Leaving directory
> >>>>>> `/home/claudio/ltib/rpm/BUILD/alsa-utils-1.0.11rc2/alsaconf'
> >>>>>> make: *** [all-recursive] Error 1
> >>>>>> error: Bad exit status from /home/claudio/ltib/tmp/rpm-tmp.67401
> >>>>>> (%build)
> >>>>>>
> >>>>>>
> >>>>>> RPM build errors:
> >>>>>>    Bad exit status from /home/claudio/ltib/tmp/rpm-tmp.67401
> (%build)
> >>>>>> Build time for alsa-utils: 12 seconds
> >>>>>>
> >>>>>> Failed building alsa-utils
> >>>>>>
> >>>>>>
> >>>>>> f_buildrpms() returned an error, exiting
> >>>>>> traceback:
> >>>>>> main:561
> >>>>>>
> >>>>>>
> >>>>>> Started: Tue Jan 19 17:09:56 2010
> >>>>>> Ended:   Tue Jan 19 17:13:38 2010
> >>>>>> Elapsed: 222 seconds
> >>>>>>
> >>>>>> These packages failed to build:
> >>>>>> alsa-utils
> >>>>>>
> >>>>>> Build Failed
> >>>>>>
> >>>>>>
> >>>>>> Someone can help me?
> >>>>>> (I Have gettext instaled)
> >>>>>>
> >>>>>> Best Regards.
> >>>>>>
> >>>>>>
> >>>>>> _______________________________________________
> >>>>>> LTIB home page: http://ltib.org
> >>>>>>
> >>>>>> Ltib mailing list
> >>>>>> address@hidden
> >>>>>> http://lists.nongnu.org/mailman/listinfo/ltib
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>> .
> >>>>>
> >>>>>
> >>>>>
> >>>>
> >>>>
> >>> .
> >>>
> >>>
> >>>
> >>
> >>
> >
> > .
> >
> >
> 
> 
> 
> 
> _______________________________________________
> LTIB home page: http://ltib.org
> 
> Ltib mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/ltib