Re: [Ltib] Problem starting X on CVS latest LTIB + imx27 ADS

[Rajesh Marathe]

Thanks Stuart.

But is it possible to configure X and tell X not to look for Keyboard at
all. Right now it is looking for keyboard by default and I am not sure
why.

regards,
Rajesh Marathe.

On Wed, 2009-12-30 at 10:41 +0000, Stuart Hughes wrote:
> Hi Rajesh,
> 
> I don't have that board so I'm not sure.  Try an: 'lsmod' on the board 
> and see if anything likely is there, if so modprobe it.  Take a look at 
> Hamilton's reply to you on 28th, maybe there's something there that may 
> help.
> 
> Regards, Stuart
> 
> Rajesh Marathe wrote:
> > Stuart,
> > 
> > Thanks for the information. I will try this out.
> > 
> > One more thing is that, I have selected "MXC Keyboard" as an input
> > driver. Presently it is selected as "M" (Module). So, what is the name
> > for this driver, do you have any idea ? I know that "mxc_ts" gets me MXC
> > Touch screen but I don't know the name for keyboard driver. Please do
> > let me know this one if you are aware.
> > 
> > Thanks for your suggestion so far and I will try out the things
> > mentioned by you.
> > 
> > regards,
> > Rajesh Marathe.
> > 
> > On Wed, 2009-12-30 at 09:30 +0000, Stuart Hughes wrote:
> >> Hi Rajaesh,
> >>
> >> Looks like it can't find a keyboard.  Maybe try with these args:
> >>
> >> Xfbdev -ac -mouse mouse -keybd keyboard &
> >>
> >> If you're using a touch screen you'll need something else maybe along 
> >> the lines of Alan's suggestion here:
> >>
> >> http://lists.gnu.org/archive/html/ltib/2009-12/msg00073.html
> >>
> >> Regards, Stuart
> >>
> >> Rajesh Marathe wrote:
> >>> Hi,
> >>>
> >>> I am using CVS latest LTIB + imx27 ADS board. I have selected "TinyX"
> >>> option while selecting X package. First I type the below commands.
> >>>
> >>> mx27# export
> >>> DISPLAY=:0.0                                                       
> >>> mx27# if [ ! -e /dev/tty0 ]; then ln -s /dev/vc/0 /dev/tty0;
> >>> fi                 
> >>> mx27# if [ ! -e /dev/tty1 ]; then ln -s /dev/vc/1 /dev/tty1;
> >>> fi                 
> >>> mx27# if [ ! -e /dev/tty2 ]; then ln -s /dev/vc/2 /dev/tty2;
> >>> fi                 
> >>>
> >>> I get the following error while running the command "Xfbdev &".
> >>>
> >>> ---------------------------------------------------------------
> >>> mx27# _XSERVTransSocketOpenCOTSServer: Unable to open socket for
> >>> inet6          
> >>> _XSERVTransOpen: transport open failed for
> >>> inet6/freescale:0                    
> >>> _XSERVTransMakeAllCOTSServerListeners: failed to open listener for
> >>> inet6        
> >>> Warning: mode not found, using
> >>> default                                          
> >>> expected keysym, got XF86Battery: line 59 of
> >>> inet                               
> >>> expected keysym, got XF86WLAN: line 60 of
> >>> inet                                  
> >>> expected keysym, got XF86Suspend: line 174 of
> >>> inet                              
> >>> expected keysym, got XF86Battery: line 205 of
> >>> inet                              
> >>> expected keysym, got XF86Bluetooth: line 206 of
> >>> inet                            
> >>> expected keysym, got XF86WLAN: line 207 of
> >>> inet                                 
> >>> expected keysym, got XF86Hibernate: line 214 of
> >>> inet                            
> >>> Couldn't find keyboard driver
> >>> keybd                                             
> >>>                                                                           
> >>>       
> >>> Backtrace (1
> >>> deep):                                                             
> >>> 0: /lib/ld-linux.so.3
> >>> [0x40012e80]                                              
> >>>                                                                           
> >>>       
> >>> Fatal server
> >>> error:                                                             
> >>> Segmentation fault
> >>> caught                                                       
> >>>                                                                           
> >>>       
> >>>                                                                           
> >>>       
> >>> ---------------------------------------------------------------
> >>>
> >>> Can you please tell me what am I doing wrong ?
> >>>
> >>> regards,
> >>> Rajesh Marathe.
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> _______________________________________________
> >>> LTIB home page: http://ltib.org
> >>>
> >>> Ltib mailing list
> >>> address@hidden
> >>> http://lists.nongnu.org/mailman/listinfo/ltib
> >>>
> > 
> >