[Ltib] Re: LTIB of fc9

[Stuart Hughes]

Hi Vijay,

You'll need to contact Freescale support, it looks like your combination
of flex/bison etc are mismatched.

Regards, Stuart

On Fri, 2008-08-22 at 12:39 +0530, Vijay Nikam wrote:
> Hello,
>  
> Thanks ... I fixed it ... but now again stuck up again at lkc ...
>  
> Is there any update available for it ... I check at gpp but it has the
> same version of lkc-1.4
>  
> Following is the Log ... during processing lkc ...
>  
> ##################################### LOG Start
> #########################################################
>  
> Processing: lkc
> =================
> rpmbuild --dbpath /opt/freescale/ltib/var/lib/rpm --define
> '_unpackaged_files_terminate_build 0' --define '_target_cpu i686'
> --define '__strip strip' --define
> '_topdir /opt/freescale/ltib/usr/src/rpm' --define
> '_prefix /opt/freescale/ltib/usr' --define
> '_tmppath /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/tmp'
> --define '_mandir /opt/freescale/ltib/usr/share/man' --define
> '_sysconfdir /opt/freescale/ltib/etc' --define '_localstatedir /var'
> -bb  --clean
> --rmsource  
> /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/dist/lfs-5.1/lkc/lkc.spec
> Executing(%prep): /bin/sh
> -e /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/tmp/rpm-tmp.40399
> + umask 022
> + cd /opt/freescale/ltib/usr/src/rpm/BUILD
> + cd /opt/freescale/ltib/usr/src/rpm/BUILD
> + rm -rf lkc-1.4
> + /bin/gzip -dc /opt/freescale/ltib/usr/src/rpm/SOURCES/lkc-1.4.tar.gz
> + tar -xvvf -
> drwxr-sr-x roman/users       0 2003-06-15 22:51 lkc-1.4/
> -rw-r--r-- roman/users    5167 2003-06-01 03:43 lkc-1.4/Makefile
> -rw-r--r-- roman/users    3805 2003-03-15 22:35
> lkc-1.4/Makefile.kernel
> -rw-r--r-- roman/users     734 2002-10-21 00:31 lkc-1.4/README
> -rw-r--r-- roman/users   10369 2003-06-07 03:30 lkc-1.4/conf.c
> -rw-r--r-- roman/users    8878 2003-06-04 05:42 lkc-1.4/confdata.c
> drwxr-sr-x roman/users       0 2002-10-21 00:35 lkc-1.4/example/
> -rw-r--r-- roman/users     536 2002-10-21 00:15
> lkc-1.4/example/miniconf.rb
> -rw-r--r-- roman/users     804 2002-10-21 00:15
> lkc-1.4/example/query.rb
> -rw-r--r-- roman/users   25007 2003-05-13 00:19 lkc-1.4/expr.c
> -rw-r--r-- roman/users    4890 2003-05-16 23:35 lkc-1.4/expr.h
> -rw-r--r-- roman/users     103 2002-10-20 20:11 lkc-1.4/extconf.rb
> -rw-r--r-- roman/users   40325 2003-06-02 02:15 lkc-1.4/gconf.c
> -rw-r--r-- roman/users   20978 2003-03-15 19:30 lkc-1.4/gconf.glade
> -rw-r--r-- roman/users    6565 2003-03-15 19:30 lkc-1.4/images.c
> -rw-r--r-- roman/users    2770 2002-12-08 21:42 lkc-1.4/kconfig.i
> -rw-r--r-- roman/users     644 2002-10-28 01:52 lkc-1.4/kconfig_load.c
> -rw-r--r-- roman/users    9438 2003-06-01 03:39
> lkc-1.4/lkc-language.txt
> -rw-r--r-- roman/users    2739 2003-05-25 07:48 lkc-1.4/lkc.h
> -rw-r--r-- roman/users    1619 2003-05-26 04:53 lkc-1.4/lkc_proto.h
> -rw-r--r-- roman/users   17302 2003-05-29 02:32 lkc-1.4/mconf.c
> -rw-r--r-- roman/users   10243 2003-06-05 03:17 lkc-1.4/menu.c
> -rw-r--r-- roman/users   30879 2003-06-15 22:51 lkc-1.4/qconf.cc
> -rw-r--r-- roman/users    5218 2003-04-21 05:23 lkc-1.4/qconf.h
> -rw-r--r-- roman/users   15613 2003-06-07 03:30 lkc-1.4/symbol.c
> -rw-r--r-- roman/users    7173 2003-05-26 23:51 lkc-1.4/zconf.l
> -rw-r--r-- roman/users   14637 2003-05-26 23:51 lkc-1.4/zconf.y
> + STATUS=0
> + '[' 0 -ne 0 ']'
> + cd lkc-1.4
> + echo 'Patch #0 (lkc-1.4-lxdialog.patch):'
> Patch #0 (lkc-1.4-lxdialog.patch):
> + patch -p1 -s
> + echo 'Patch #1 (lkc-1.4-1.patch):'
> Patch #1 (lkc-1.4-1.patch):
> + patch -p1 -s
> + echo 'Patch #2 (lkc-1.4-ncurses.patch):'
> Patch #2 (lkc-1.4-ncurses.patch):
> + patch -p1 -s
> + echo 'Patch #3 (lkc-1.4-help.patch):'
> Patch #3 (lkc-1.4-help.patch):
> + patch -p1 -s
> + echo 'Patch #4 (lkc-1.4-defaults-4.patch):'
> Patch #4 (lkc-1.4-defaults-4.patch):
> + patch -p1 -s
> + echo 'Patch #5 (lkc-1.4-search-5.patch):'
> Patch #5 (lkc-1.4-search-5.patch):
> + patch -p1 -s
> + echo 'Patch #6 (lkc-1.4-datestamp.patch):'
> Patch #6 (lkc-1.4-datestamp.patch):
> + patch -p1 -s
> + exit 0
> Executing(%build): /bin/sh
> -e /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/tmp/rpm-tmp.40399
> + umask 022
> + cd /opt/freescale/ltib/usr/src/rpm/BUILD
> + cd lkc-1.4
> + make -j1 conf mconf
> gcc -O0 -Wall -g -fPIC -c conf.c -o conf.o
> bison -l -b zconf -p zconf zconf.y
> make: *** [zconf.tab.c] Segmentation fault
> error: Bad exit status
> from /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/tmp/rpm-tmp.40399 
> (%build)
> 
> 
> RPM build errors:
>     Bad exit status
> from /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/tmp/rpm-tmp.40399 
> (%build)
> Build time for lkc: 1 seconds
> 
> Failed building lkc
> Died at ./ltib line 1192.
> 
> Started: Fri Aug 22 11:35:41 2008
> Ended:   Fri Aug 22 11:38:13 2008
> Elapsed: 152 seconds
> 
> These packages failed to build:
> lkc 
> Build Failed
> ############################################# LOG End
> ######################################################### 
> 
> Please suggest some way to proceed ... 
>  
> Kindly please acknowledge ... thank you ...
>  
> Kind Regards,
> Vijay Nikam 
> 
>  
> On 8/20/08, Stuart Hughes <address@hidden> wrote: 
>         Hi Vijay,
>         
>         You need to contact Freescale for support on ISO
>         versions.  However, it
>         looks to me like you need an update to your flex spec file
>         (2.5.4).
>         
>         There's a later version in Savannah CVS.
>         
>         Regards, Stuart
>         
>         
>         On Wed, 2008-08-20 at 17:34 +0530, Vijay Nikam wrote:
>         > Hello,
>         >
>         > I am installing LTIB on Fedore Core 9 (fc9) ... the inital
>         > installation was successful ...
>         >
>         > then to complete the installation I need to run './ltib'
>         command but
>         > it fails at the following place;
>         >
>         > ############################### Start
>         > #################################################
>         > make: *** [parse.c] Segmentation fault
>         > error: Bad exit status
>         >
>         from 
> /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/tmp/rpm-tmp.93818 (%build)
>         >
>         >
>         > RPM build errors:
>         >     Bad exit status
>         >
>         from 
> /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/tmp/rpm-tmp.93818 (%build)
>         > Build time for flex: 1 seconds
>         >
>         > Failed building flex
>         > Died at ./ltib line 1192.
>         >
>         > ############################# End
>         > #####################################################
>         >
>         > following is the complete log
>         >
>         > ############################### LOG Start
>         > ###############################################
>         >
>         > Updating lpp from local packages
>         >
>         > Processing platform: Host support packages
>         > ============================================
>         >
>         using 
> /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/config/platform/host/ltib.preconfig
>         >
>         > Processing: fake-provides
>         > ===========================
>         >
>         > Processing: mkspooflinks
>         > ==========================
>         >
>         > Processing: bison
>         > ===================
>         >
>         > Processing: flex
>         > ==================
>         >
>         > Cowardly refusing to clobber existing directory:
>         >      /opt/freescale/ltib/usr/src/rpm/BUILD/flex-2.5.4
>         > Remove this by hand if you really want to rebuild this
>         package from
>         > scratch
>         >
>         > scbuild/scdeploy already unpacked package
>         >
>         > Processing: flex
>         > ==================
>         > rpmbuild --dbpath /opt/freescale/ltib/var/lib/rpm --define
>         > '_unpackaged_files_terminate_build 0' --define '_target_cpu
>         i686'
>         > --define '__strip strip' --define
>         > '_topdir /opt/freescale/ltib/usr/src/rpm' --define
>         > '_prefix /opt/freescale/ltib/usr' --define
>         >
>         '_tmppath /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/tmp'
>         > --define '_mandir /opt/freescale/ltib/usr/share/man'
>         --define
>         > '_sysconfdir /opt/freescale/ltib/etc' --define
>         '_localstatedir /var'
>         > -bc
>         >
>         --short-circuit  
> /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/dist/lfs-5.1/flex/flex.spec
>         > Executing(%build): /bin/sh
>         >
>         -e /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/tmp/rpm-tmp.93818
>         > + umask 022
>         > + cd /opt/freescale/ltib/usr/src/rpm/BUILD
>         > + cd flex-2.5.4
>         > + ./configure --prefix=/opt/freescale/ltib/usr
>         > loading cache ./config.cache
>         > checking whether ln -s works... (cached) yes
>         > checking for bison... (cached) bison -y
>         > checking for gcc... (cached) gcc
>         > checking whether we are using GNU C... (cached) yes
>         > checking whether gcc accepts -g... (cached) yes
>         > checking for ranlib... (cached) ranlib
>         > checking for a BSD compatible install...
>         (cached) /usr/bin/install -c
>         > checking whether make sets $MAKE... (cached) yes
>         > checking for working const... (cached) yes
>         > checking how to run the C preprocessor... (cached) gcc -E
>         > checking whether cross-compiling... (cached) no
>         > checking for ANSI C header files... (cached) yes
>         > checking for size_t... (cached) yes
>         > checking for ANSI C header files... (cached) yes
>         > checking for string.h... (cached) yes
>         > checking for malloc.h... (cached) yes
>         > checking for sys/types.h... (cached) yes
>         > checking for working alloca.h... (cached) yes
>         > checking for alloca... (cached) yes
>         > updating cache ./config.cache
>         > creating ./config.status
>         > creating Makefile
>         > creating config.h
>         > config.h is unchanged
>         > + make
>         > bison -y -d ./parse.y
>         > make: *** [parse.c] Segmentation fault
>         > error: Bad exit status
>         >
>         from 
> /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/tmp/rpm-tmp.93818 (%build)
>         >
>         >
>         > RPM build errors:
>         >     Bad exit status
>         >
>         from 
> /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/tmp/rpm-tmp.93818 (%build)
>         > Build time for flex: 1 seconds
>         >
>         > Failed building flex
>         > Died at ./ltib line 1192.
>         >
>         > Started: Wed Aug 20 17:24:19 2008
>         > Ended:   Wed Aug 20 17:24:24 2008
>         > Elapsed: 5 seconds
>         >
>         > These packages failed to build:
>         > flex
>         > Build Failed
>         >
>         > ############################### LOG End
>         > ###############################################
>         >
>         > Anyone please suggest some way to proceed ... Kindly please
>         > acknowledge ... thank you ...
>         >
>         > Kind Regards,
>         >
>         > Vijay Nikam
>         >
>         >
>         >
>         >
>         
>