ltib
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Ltib] Re: LTIB of fc9


From: Vijay Nikam
Subject: [Ltib] Re: LTIB of fc9
Date: Fri, 22 Aug 2008 12:39:10 +0530

Hello,
 
Thanks ... I fixed it ... but now again stuck up again at lkc ...
 
Is there any update available for it ... I check at gpp but it has the same version of lkc-1.4
 
Following is the Log ... during processing lkc ...
 
##################################### LOG Start #########################################################
 

Processing: lkc
=================
rpmbuild --dbpath /opt/freescale/ltib/var/lib/rpm --define '_unpackaged_files_terminate_build 0' --define '_target_cpu i686' --define '__strip strip' --define '_topdir /opt/freescale/ltib/usr/src/rpm' --define '_prefix /opt/freescale/ltib/usr' --define '_tmppath /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/tmp' --define '_mandir /opt/freescale/ltib/usr/share/man' --define '_sysconfdir /opt/freescale/ltib/etc' --define '_localstatedir /var' -bb  --clean --rmsource  /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/dist/lfs-5.1/lkc/lkc.spec
Executing(%prep): /bin/sh -e /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/tmp/rpm-tmp.40399
+ umask 022
+ cd /opt/freescale/ltib/usr/src/rpm/BUILD
+ cd /opt/freescale/ltib/usr/src/rpm/BUILD
+ rm -rf lkc-1.4
+ /bin/gzip -dc /opt/freescale/ltib/usr/src/rpm/SOURCES/lkc-1.4.tar.gz
+ tar -xvvf -
drwxr-sr-x roman/users       0 2003-06-15 22:51 lkc-1.4/
-rw-r--r-- roman/users    5167 2003-06-01 03:43 lkc-1.4/Makefile
-rw-r--r-- roman/users    3805 2003-03-15 22:35 lkc-1.4/Makefile.kernel
-rw-r--r-- roman/users     734 2002-10-21 00:31 lkc-1.4/README
-rw-r--r-- roman/users   10369 2003-06-07 03:30 lkc-1.4/conf.c
-rw-r--r-- roman/users    8878 2003-06-04 05:42 lkc-1.4/confdata.c
drwxr-sr-x roman/users       0 2002-10-21 00:35 lkc-1.4/example/
-rw-r--r-- roman/users     536 2002-10-21 00:15 lkc-1.4/example/miniconf.rb
-rw-r--r-- roman/users     804 2002-10-21 00:15 lkc-1.4/example/query.rb
-rw-r--r-- roman/users   25007 2003-05-13 00:19 lkc-1.4/expr.c
-rw-r--r-- roman/users    4890 2003-05-16 23:35 lkc-1.4/expr.h
-rw-r--r-- roman/users     103 2002-10-20 20:11 lkc-1.4/extconf.rb
-rw-r--r-- roman/users   40325 2003-06-02 02:15 lkc-1.4/gconf.c
-rw-r--r-- roman/users   20978 2003-03-15 19:30 lkc-1.4/gconf.glade
-rw-r--r-- roman/users    6565 2003-03-15 19:30 lkc-1.4/images.c
-rw-r--r-- roman/users    2770 2002-12-08 21:42 lkc-1.4/kconfig.i
-rw-r--r-- roman/users     644 2002-10-28 01:52 lkc-1.4/kconfig_load.c
-rw-r--r-- roman/users    9438 2003-06-01 03:39 lkc-1.4/lkc-language.txt
-rw-r--r-- roman/users    2739 2003-05-25 07:48 lkc-1.4/lkc.h
-rw-r--r-- roman/users    1619 2003-05-26 04:53 lkc-1.4/lkc_proto.h
-rw-r--r-- roman/users   17302 2003-05-29 02:32 lkc-1.4/mconf.c
-rw-r--r-- roman/users   10243 2003-06-05 03:17 lkc-1.4/menu.c
-rw-r--r-- roman/users   30879 2003-06-15 22:51 lkc-1.4/qconf.cc
-rw-r--r-- roman/users    5218 2003-04-21 05:23 lkc-1.4/qconf.h
-rw-r--r-- roman/users   15613 2003-06-07 03:30 lkc-1.4/symbol.c
-rw-r--r-- roman/users    7173 2003-05-26 23:51 lkc-1.4/zconf.l
-rw-r--r-- roman/users   14637 2003-05-26 23:51 lkc-1.4/zconf.y
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd lkc-1.4
+ echo 'Patch #0 (lkc-1.4-lxdialog.patch):'
Patch #0 (lkc-1.4-lxdialog.patch):
+ patch -p1 -s
+ echo 'Patch #1 (lkc-1.4-1.patch):'
Patch #1 (lkc-1.4-1.patch):
+ patch -p1 -s
+ echo 'Patch #2 (lkc-1.4-ncurses.patch):'
Patch #2 (lkc-1.4-ncurses.patch):
+ patch -p1 -s
+ echo 'Patch #3 (lkc-1.4-help.patch):'
Patch #3 (lkc-1.4-help.patch):
+ patch -p1 -s
+ echo 'Patch #4 (lkc-1.4-defaults-4.patch):'
Patch #4 (lkc-1.4-defaults-4.patch):
+ patch -p1 -s
+ echo 'Patch #5 (lkc-1.4-search-5.patch):'
Patch #5 (lkc-1.4-search-5.patch):
+ patch -p1 -s
+ echo 'Patch #6 (lkc-1.4-datestamp.patch):'
Patch #6 (lkc-1.4-datestamp.patch):
+ patch -p1 -s
+ exit 0
Executing(%build): /bin/sh -e /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/tmp/rpm-tmp.40399
+ umask 022
+ cd /opt/freescale/ltib/usr/src/rpm/BUILD
+ cd lkc-1.4
+ make -j1 conf mconf
gcc -O0 -Wall -g -fPIC -c conf.c -o conf.o
bison -l -b zconf -p zconf zconf.y
make: *** [zconf.tab.c] Segmentation fault
error: Bad exit status from /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/tmp/rpm-tmp.40399 (%build)


RPM build errors:
    Bad exit status from /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/tmp/rpm-tmp.40399 (%build)
Build time for lkc: 1 seconds

Failed building lkc
Died at ./ltib line 1192.

Started: Fri Aug 22 11:35:41 2008
Ended:   Fri Aug 22 11:38:13 2008
Elapsed: 152 seconds

These packages failed to build:
lkc
Build Failed
############################################# LOG End #########################################################
 

Please suggest some way to proceed ...
 
Kindly please acknowledge ... thank you ...
 
Kind Regards,
Vijay Nikam

 
On 8/20/08, Stuart Hughes <address@hidden> wrote:
Hi Vijay,

You need to contact Freescale for support on ISO versions.  However, it
looks to me like you need an update to your flex spec file (2.5.4).

There's a later version in Savannah CVS.

Regards, Stuart


On Wed, 2008-08-20 at 17:34 +0530, Vijay Nikam wrote:
> Hello,
>
> I am installing LTIB on Fedore Core 9 (fc9) ... the inital
> installation was successful ...
>
> then to complete the installation I need to run './ltib' command but
> it fails at the following place;
>
> ############################### Start
> #################################################
> make: *** [parse.c] Segmentation fault
> error: Bad exit status
> from /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/tmp/rpm-tmp.93818 (%build)
>
>
> RPM build errors:
>     Bad exit status
> from /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/tmp/rpm-tmp.93818 (%build)
> Build time for flex: 1 seconds
>
> Failed building flex
> Died at ./ltib line 1192.
>
> ############################# End
> #####################################################
>
> following is the complete log
>
> ############################### LOG Start
> ###############################################
>
> Updating lpp from local packages
>
> Processing platform: Host support packages
> ============================================
> using /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/config/platform/host/ltib.preconfig
>
> Processing: fake-provides
> ===========================
>
> Processing: mkspooflinks
> ==========================
>
> Processing: bison
> ===================
>
> Processing: flex
> ==================
>
> Cowardly refusing to clobber existing directory:
>      /opt/freescale/ltib/usr/src/rpm/BUILD/flex-2.5.4
> Remove this by hand if you really want to rebuild this package from
> scratch
>
> scbuild/scdeploy already unpacked package
>
> Processing: flex
> ==================
> rpmbuild --dbpath /opt/freescale/ltib/var/lib/rpm --define
> '_unpackaged_files_terminate_build 0' --define '_target_cpu i686'
> --define '__strip strip' --define
> '_topdir /opt/freescale/ltib/usr/src/rpm' --define
> '_prefix /opt/freescale/ltib/usr' --define
> '_tmppath /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/tmp'
> --define '_mandir /opt/freescale/ltib/usr/share/man' --define
> '_sysconfdir /opt/freescale/ltib/etc' --define '_localstatedir /var'
> -bc
> --short-circuit  /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/dist/lfs-5.1/flex/flex.spec
> Executing(%build): /bin/sh
> -e /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/tmp/rpm-tmp.93818
> + umask 022
> + cd /opt/freescale/ltib/usr/src/rpm/BUILD
> + cd flex-2.5.4
> + ./configure --prefix=/opt/freescale/ltib/usr
> loading cache ./config.cache
> checking whether ln -s works... (cached) yes
> checking for bison... (cached) bison -y
> checking for gcc... (cached) gcc
> checking whether we are using GNU C... (cached) yes
> checking whether gcc accepts -g... (cached) yes
> checking for ranlib... (cached) ranlib
> checking for a BSD compatible install... (cached) /usr/bin/install -c
> checking whether make sets $MAKE... (cached) yes
> checking for working const... (cached) yes
> checking how to run the C preprocessor... (cached) gcc -E
> checking whether cross-compiling... (cached) no
> checking for ANSI C header files... (cached) yes
> checking for size_t... (cached) yes
> checking for ANSI C header files... (cached) yes
> checking for string.h... (cached) yes
> checking for malloc.h... (cached) yes
> checking for sys/types.h... (cached) yes
> checking for working alloca.h... (cached) yes
> checking for alloca... (cached) yes
> updating cache ./config.cache
> creating ./config.status
> creating Makefile
> creating config.h
> config.h is unchanged
> + make
> bison -y -d ./parse.y
> make: *** [parse.c] Segmentation fault
> error: Bad exit status
> from /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/tmp/rpm-tmp.93818 (%build)
>
>
> RPM build errors:
>     Bad exit status
> from /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/tmp/rpm-tmp.93818 (%build)
> Build time for flex: 1 seconds
>
> Failed building flex
> Died at ./ltib line 1192.
>
> Started: Wed Aug 20 17:24:19 2008
> Ended:   Wed Aug 20 17:24:24 2008
> Elapsed: 5 seconds
>
> These packages failed to build:
> flex
> Build Failed
>
> ############################### LOG End
> ###############################################
>
> Anyone please suggest some way to proceed ... Kindly please
> acknowledge ... thank you ...
>
> Kind Regards,
>
> Vijay Nikam
>
>
>
>



reply via email to

[Prev in Thread] Current Thread [Next in Thread]