can not get gnokii to work

[Homayoun Ahmed]

Hi guys

 

I seem to have fallen at the first hurdle with gnokii. After installing the program I then went about connecting my nokia 6680 to my laptops usb port with the cable that came with the phone.

 

I am running fedora core 5 as a vmware. When I connect the device it appears up on /dev as ttyACM0. I used the following for my configuration file:

 

port  = /dev/ttyACMo

model = 6680

connection = dku2

 

I used dku2 for connection as I did not know which one to use. When I type in gnokii idetify

 

GNOKII Version 0.6.12

LOG: debug mask is 0x1

phone instance config:

model: 6680

port_device: /dev/ttyACM0

connection_type: 0

init_length: 0

serial_baudrate: 19200

serial_write_usleep: -1

hardware_handshake: 0

require_dcd: 0

smsc_timeout: 1000

connect_script:

disconnect_script:

rfcomm_cn: 1

sm_retry: off

Serial device: opening device /dev/ttyACM0

Message sent: 0x01 / 0x0002

00 01                                           |

Message received: 0x01 / 0x0002

00 01                                           |

Received message type 01

gnokii: pkt.c:55: buffer_expand: Assertion `buf->size >= buf->offs + len' failed.

Aborted

 

So I changed the port to the default for the configuration file to ttyS0

 

I then ran the same command and I got the following:

 

GNOKII Version 0.6.12

LOG: debug mask is 0x1

phone instance config:

model: 6680

port_device: /dev/ttyS0

connection_type: 9

init_length: 0

serial_baudrate: 19200

serial_write_usleep: -1

hardware_handshake: 0

require_dcd: 0

smsc_timeout: 1000

connect_script:

disconnect_script:

rfcomm_cn: 1

sm_retry: off

Telephone interface init failed: Function or connection type not supported by the phone.

Quitting.

 

I then tried changing the connection to “connection = dlr3p” but had no luck

 

Could someone help me. Thank you in advance for any help