[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Emacs-diffs] Changes to emacs/gc/mach_dep.c [Boehm-versions]
From: |
Dave Love |
Subject: |
[Emacs-diffs] Changes to emacs/gc/mach_dep.c [Boehm-versions] |
Date: |
Mon, 16 Jun 2003 11:20:00 -0400 |
Index: emacs/gc/mach_dep.c
diff -c /dev/null emacs/gc/mach_dep.c:1.2.2.1.2.1
*** /dev/null Mon Jun 16 11:20:00 2003
--- emacs/gc/mach_dep.c Mon Jun 16 11:19:52 2003
***************
*** 0 ****
--- 1,591 ----
+ /*
+ * Copyright 1988, 1989 Hans-J. Boehm, Alan J. Demers
+ * Copyright (c) 1991-1994 by Xerox Corporation. All rights reserved.
+ *
+ * THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
+ * OR IMPLIED. ANY USE IS AT YOUR OWN RISK.
+ *
+ * Permission is hereby granted to use or copy this program
+ * for any purpose, provided the above notices are retained on all copies.
+ * Permission to modify the code and to distribute modified code is granted,
+ * provided the above notices are retained, and a notice that the code was
+ * modified is included with the above copyright notice.
+ */
+ /* Boehm, November 17, 1995 12:13 pm PST */
+ # include "private/gc_priv.h"
+ # include <stdio.h>
+ # include <setjmp.h>
+ # if defined(OS2) || defined(CX_UX)
+ # define _setjmp(b) setjmp(b)
+ # define _longjmp(b,v) longjmp(b,v)
+ # endif
+ # ifdef AMIGA
+ # ifndef __GNUC__
+ # include <dos.h>
+ # else
+ # include <machine/reg.h>
+ # endif
+ # endif
+
+ #if defined(__MWERKS__) && !defined(POWERPC)
+
+ asm static void PushMacRegisters()
+ {
+ sub.w #4,sp // reserve space for one parameter.
+ move.l a2,(sp)
+ jsr GC_push_one
+ move.l a3,(sp)
+ jsr GC_push_one
+ move.l a4,(sp)
+ jsr GC_push_one
+ # if !__option(a6frames)
+ // <pcb> perhaps a6 should be pushed if stack frames are not being
used.
+ move.l a6,(sp)
+ jsr GC_push_one
+ # endif
+ // skip a5 (globals), a6 (frame pointer), and a7 (stack pointer)
+ move.l d2,(sp)
+ jsr GC_push_one
+ move.l d3,(sp)
+ jsr GC_push_one
+ move.l d4,(sp)
+ jsr GC_push_one
+ move.l d5,(sp)
+ jsr GC_push_one
+ move.l d6,(sp)
+ jsr GC_push_one
+ move.l d7,(sp)
+ jsr GC_push_one
+ add.w #4,sp // fix stack.
+ rts
+ }
+
+ #endif /* __MWERKS__ */
+
+ # if defined(SPARC) || defined(IA64)
+ /* Value returned from register flushing routine; either sp (SPARC) */
+ /* or ar.bsp (IA64)
*/
+ word GC_save_regs_ret_val;
+ # endif
+
+ /* Routine to mark from registers that are preserved by the C compiler. */
+ /* This must be ported to every new architecture. There is a generic */
+ /* version at the end, that is likely, but not guaranteed to work */
+ /* on your architecture. Run the test_setjmp program to see whether */
+ /* there is any chance it will work. */
+
+ #if !defined(USE_GENERIC_PUSH_REGS) && !defined(USE_ASM_PUSH_REGS)
+ #undef HAVE_PUSH_REGS
+ void GC_push_regs()
+ {
+ # ifdef RT
+ register long TMP_SP; /* must be bound to r11 */
+ # endif
+
+ # ifdef VAX
+ /* VAX - generic code below does not work under 4.2 */
+ /* r1 through r5 are caller save, and therefore */
+ /* on the stack or dead. */
+ asm("pushl r11"); asm("calls $1,_GC_push_one");
+ asm("pushl r10"); asm("calls $1,_GC_push_one");
+ asm("pushl r9"); asm("calls $1,_GC_push_one");
+ asm("pushl r8"); asm("calls $1,_GC_push_one");
+ asm("pushl r7"); asm("calls $1,_GC_push_one");
+ asm("pushl r6"); asm("calls $1,_GC_push_one");
+ # define HAVE_PUSH_REGS
+ # endif
+ # if defined(M68K) && (defined(SUNOS4) || defined(NEXT))
+ /* M68K SUNOS - could be replaced by generic code */
+ /* a0, a1 and d1 are caller save */
+ /* and therefore are on stack or dead. */
+
+ asm("subqw #0x4,sp"); /* allocate word on top of stack */
+
+ asm("movl a2,sp@"); asm("jbsr _GC_push_one");
+ asm("movl a3,sp@"); asm("jbsr _GC_push_one");
+ asm("movl a4,sp@"); asm("jbsr _GC_push_one");
+ asm("movl a5,sp@"); asm("jbsr _GC_push_one");
+ /* Skip frame pointer and stack pointer */
+ asm("movl d1,sp@"); asm("jbsr _GC_push_one");
+ asm("movl d2,sp@"); asm("jbsr _GC_push_one");
+ asm("movl d3,sp@"); asm("jbsr _GC_push_one");
+ asm("movl d4,sp@"); asm("jbsr _GC_push_one");
+ asm("movl d5,sp@"); asm("jbsr _GC_push_one");
+ asm("movl d6,sp@"); asm("jbsr _GC_push_one");
+ asm("movl d7,sp@"); asm("jbsr _GC_push_one");
+
+ asm("addqw #0x4,sp"); /* put stack back where it was */
+ # define HAVE_PUSH_REGS
+ # endif
+
+ # if defined(M68K) && defined(HP)
+ /* M68K HP - could be replaced by generic code */
+ /* a0, a1 and d1 are caller save. */
+
+ asm("subq.w &0x4,%sp"); /* allocate word on top of stack */
+
+ asm("mov.l %a2,(%sp)"); asm("jsr _GC_push_one");
+ asm("mov.l %a3,(%sp)"); asm("jsr _GC_push_one");
+ asm("mov.l %a4,(%sp)"); asm("jsr _GC_push_one");
+ asm("mov.l %a5,(%sp)"); asm("jsr _GC_push_one");
+ /* Skip frame pointer and stack pointer */
+ asm("mov.l %d1,(%sp)"); asm("jsr _GC_push_one");
+ asm("mov.l %d2,(%sp)"); asm("jsr _GC_push_one");
+ asm("mov.l %d3,(%sp)"); asm("jsr _GC_push_one");
+ asm("mov.l %d4,(%sp)"); asm("jsr _GC_push_one");
+ asm("mov.l %d5,(%sp)"); asm("jsr _GC_push_one");
+ asm("mov.l %d6,(%sp)"); asm("jsr _GC_push_one");
+ asm("mov.l %d7,(%sp)"); asm("jsr _GC_push_one");
+
+ asm("addq.w &0x4,%sp"); /* put stack back where it was */
+ # define HAVE_PUSH_REGS
+ # endif /* M68K HP */
+
+ # if defined(M68K) && defined(AMIGA)
+ /* AMIGA - could be replaced by generic code */
+ /* a0, a1, d0 and d1 are caller save */
+
+ # ifdef __GNUC__
+ asm("subq.w &0x4,%sp"); /* allocate word on top of stack */
+
+ asm("mov.l %a2,(%sp)"); asm("jsr _GC_push_one");
+ asm("mov.l %a3,(%sp)"); asm("jsr _GC_push_one");
+ asm("mov.l %a4,(%sp)"); asm("jsr _GC_push_one");
+ asm("mov.l %a5,(%sp)"); asm("jsr _GC_push_one");
+ asm("mov.l %a6,(%sp)"); asm("jsr _GC_push_one");
+ /* Skip frame pointer and stack pointer */
+ asm("mov.l %d2,(%sp)"); asm("jsr _GC_push_one");
+ asm("mov.l %d3,(%sp)"); asm("jsr _GC_push_one");
+ asm("mov.l %d4,(%sp)"); asm("jsr _GC_push_one");
+ asm("mov.l %d5,(%sp)"); asm("jsr _GC_push_one");
+ asm("mov.l %d6,(%sp)"); asm("jsr _GC_push_one");
+ asm("mov.l %d7,(%sp)"); asm("jsr _GC_push_one");
+
+ asm("addq.w &0x4,%sp"); /* put stack back where it was */
+ # define HAVE_PUSH_REGS
+ # else /* !__GNUC__ */
+ GC_push_one(getreg(REG_A2));
+ GC_push_one(getreg(REG_A3));
+ # ifndef __SASC
+ /* Can probably be changed to #if 0 -Kjetil M. (a4=globals)*/
+ GC_push_one(getreg(REG_A4));
+ # endif
+ GC_push_one(getreg(REG_A5));
+ GC_push_one(getreg(REG_A6));
+ /* Skip stack pointer */
+ GC_push_one(getreg(REG_D2));
+ GC_push_one(getreg(REG_D3));
+ GC_push_one(getreg(REG_D4));
+ GC_push_one(getreg(REG_D5));
+ GC_push_one(getreg(REG_D6));
+ GC_push_one(getreg(REG_D7));
+ # define HAVE_PUSH_REGS
+ # endif /* !__GNUC__ */
+ # endif /* AMIGA */
+
+ # if defined(M68K) && defined(MACOS)
+ # if defined(THINK_C)
+ # define PushMacReg(reg) \
+ move.l reg,(sp) \
+ jsr GC_push_one
+ asm {
+ sub.w #4,sp ; reserve space for one
parameter.
+ PushMacReg(a2);
+ PushMacReg(a3);
+ PushMacReg(a4);
+ ; skip a5 (globals), a6 (frame pointer), and a7 (stack pointer)
+ PushMacReg(d2);
+ PushMacReg(d3);
+ PushMacReg(d4);
+ PushMacReg(d5);
+ PushMacReg(d6);
+ PushMacReg(d7);
+ add.w #4,sp ; fix stack.
+ }
+ # define HAVE_PUSH_REGS
+ # undef PushMacReg
+ # endif /* THINK_C */
+ # if defined(__MWERKS__)
+ PushMacRegisters();
+ # define HAVE_PUSH_REGS
+ # endif /* __MWERKS__ */
+ # endif /* MACOS */
+
+ # if defined(I386) &&!defined(OS2) &&!defined(SVR4) \
+ && (defined(__MINGW32__) || !defined(MSWIN32)) \
+ && !defined(SCO) && !defined(SCO_ELF) \
+ && !(defined(LINUX) && defined(__ELF__)) \
+ && !(defined(FREEBSD) && defined(__ELF__)) \
+ && !(defined(NETBSD) && defined(__ELF__)) \
+ && !(defined(OPENBSD) && defined(__ELF__)) \
+ && !(defined(BEOS) && defined(__ELF__)) \
+ && !defined(DOS4GW) && !defined(HURD)
+ /* I386 code, generic code does not appear to work */
+ /* It does appear to work under OS2, and asms dont */
+ /* This is used for some 38g UNIX variants and for CYGWIN32 */
+ asm("pushl %eax"); asm("call _GC_push_one"); asm("addl $4,%esp");
+ asm("pushl %ecx"); asm("call _GC_push_one"); asm("addl $4,%esp");
+ asm("pushl %edx"); asm("call _GC_push_one"); asm("addl $4,%esp");
+ asm("pushl %ebp"); asm("call _GC_push_one"); asm("addl $4,%esp");
+ asm("pushl %esi"); asm("call _GC_push_one"); asm("addl $4,%esp");
+ asm("pushl %edi"); asm("call _GC_push_one"); asm("addl $4,%esp");
+ asm("pushl %ebx"); asm("call _GC_push_one"); asm("addl $4,%esp");
+ # define HAVE_PUSH_REGS
+ # endif
+
+ # if ( defined(I386) && defined(LINUX) && defined(__ELF__) ) \
+ || ( defined(I386) && defined(FREEBSD) && defined(__ELF__) ) \
+ || ( defined(I386) && defined(NETBSD) && defined(__ELF__) ) \
+ || ( defined(I386) && defined(OPENBSD) && defined(__ELF__) ) \
+ || ( defined(I386) && defined(HURD) && defined(__ELF__) ) \
+ || ( defined(I386) && defined(DGUX) )
+
+ /* This is modified for Linux with ELF (Note: _ELF_ only) */
+ /* This section handles FreeBSD with ELF. */
+ /* Eax is caller-save and dead here. Other caller-save */
+ /* registers could also be skipped. We assume there are no */
+ /* pointers in MMX registers, etc. */
+ /* We combine instructions in a single asm to prevent gcc from */
+ /* inserting code in the middle. */
+ asm("pushl %ecx; call GC_push_one; addl $4,%esp");
+ asm("pushl %edx; call GC_push_one; addl $4,%esp");
+ asm("pushl %ebp; call GC_push_one; addl $4,%esp");
+ asm("pushl %esi; call GC_push_one; addl $4,%esp");
+ asm("pushl %edi; call GC_push_one; addl $4,%esp");
+ asm("pushl %ebx; call GC_push_one; addl $4,%esp");
+ # define HAVE_PUSH_REGS
+ # endif
+
+ # if ( defined(I386) && defined(BEOS) && defined(__ELF__) )
+ /* As far as I can understand from */
+ /* http://www.beunited.org/articles/jbq/nasm.shtml, */
+ /* only ebp, esi, edi and ebx are not scratch. How MMX */
+ /* etc. registers should be treated, I have no idea. */
+ asm("pushl %ebp; call GC_push_one; addl $4,%esp");
+ asm("pushl %esi; call GC_push_one; addl $4,%esp");
+ asm("pushl %edi; call GC_push_one; addl $4,%esp");
+ asm("pushl %ebx; call GC_push_one; addl $4,%esp");
+ # define HAVE_PUSH_REGS
+ # endif
+
+ # if defined(I386) && defined(MSWIN32) && !defined(__MINGW32__) \
+ && !defined(USE_GENERIC)
+ /* I386 code, Microsoft variant */
+ __asm push eax
+ __asm call GC_push_one
+ __asm add esp,4
+ __asm push ebx
+ __asm call GC_push_one
+ __asm add esp,4
+ __asm push ecx
+ __asm call GC_push_one
+ __asm add esp,4
+ __asm push edx
+ __asm call GC_push_one
+ __asm add esp,4
+ __asm push ebp
+ __asm call GC_push_one
+ __asm add esp,4
+ __asm push esi
+ __asm call GC_push_one
+ __asm add esp,4
+ __asm push edi
+ __asm call GC_push_one
+ __asm add esp,4
+ # define HAVE_PUSH_REGS
+ # endif
+
+ # if defined(I386) && (defined(SVR4) || defined(SCO) ||
defined(SCO_ELF))
+ /* I386 code, SVR4 variant, generic code does not appear to work */
+ asm("pushl %eax"); asm("call GC_push_one"); asm("addl $4,%esp");
+ asm("pushl %ebx"); asm("call GC_push_one"); asm("addl $4,%esp");
+ asm("pushl %ecx"); asm("call GC_push_one"); asm("addl $4,%esp");
+ asm("pushl %edx"); asm("call GC_push_one"); asm("addl $4,%esp");
+ asm("pushl %ebp"); asm("call GC_push_one"); asm("addl $4,%esp");
+ asm("pushl %esi"); asm("call GC_push_one"); asm("addl $4,%esp");
+ asm("pushl %edi"); asm("call GC_push_one"); asm("addl $4,%esp");
+ # define HAVE_PUSH_REGS
+ # endif
+
+ # ifdef NS32K
+ asm ("movd r3, tos"); asm ("bsr ?_GC_push_one"); asm ("adjspb $-4");
+ asm ("movd r4, tos"); asm ("bsr ?_GC_push_one"); asm ("adjspb $-4");
+ asm ("movd r5, tos"); asm ("bsr ?_GC_push_one"); asm ("adjspb $-4");
+ asm ("movd r6, tos"); asm ("bsr ?_GC_push_one"); asm ("adjspb $-4");
+ asm ("movd r7, tos"); asm ("bsr ?_GC_push_one"); asm ("adjspb $-4");
+ # define HAVE_PUSH_REGS
+ # endif
+
+ # if defined(SPARC)
+ GC_save_regs_ret_val = GC_save_regs_in_stack();
+ # define HAVE_PUSH_REGS
+ # endif
+
+ # ifdef RT
+ GC_push_one(TMP_SP); /* GC_push_one from r11 */
+
+ asm("cas r11, r6, r0"); GC_push_one(TMP_SP); /* r6 */
+ asm("cas r11, r7, r0"); GC_push_one(TMP_SP); /* through */
+ asm("cas r11, r8, r0"); GC_push_one(TMP_SP); /* r10 */
+ asm("cas r11, r9, r0"); GC_push_one(TMP_SP);
+ asm("cas r11, r10, r0"); GC_push_one(TMP_SP);
+
+ asm("cas r11, r12, r0"); GC_push_one(TMP_SP); /* r12 */
+ asm("cas r11, r13, r0"); GC_push_one(TMP_SP); /* through */
+ asm("cas r11, r14, r0"); GC_push_one(TMP_SP); /* r15 */
+ asm("cas r11, r15, r0"); GC_push_one(TMP_SP);
+ # define HAVE_PUSH_REGS
+ # endif
+
+ # if defined(M68K) && defined(SYSV)
+ /* Once again similar to SUN and HP, though setjmp appears to work.
+ --Parag
+ */
+ # ifdef __GNUC__
+ asm("subqw #0x4,%sp"); /* allocate word on top of stack */
+
+ asm("movl %a2,%sp@"); asm("jbsr GC_push_one");
+ asm("movl %a3,%sp@"); asm("jbsr GC_push_one");
+ asm("movl %a4,%sp@"); asm("jbsr GC_push_one");
+ asm("movl %a5,%sp@"); asm("jbsr GC_push_one");
+ /* Skip frame pointer and stack pointer */
+ asm("movl %d1,%sp@"); asm("jbsr GC_push_one");
+ asm("movl %d2,%sp@"); asm("jbsr GC_push_one");
+ asm("movl %d3,%sp@"); asm("jbsr GC_push_one");
+ asm("movl %d4,%sp@"); asm("jbsr GC_push_one");
+ asm("movl %d5,%sp@"); asm("jbsr GC_push_one");
+ asm("movl %d6,%sp@"); asm("jbsr GC_push_one");
+ asm("movl %d7,%sp@"); asm("jbsr GC_push_one");
+
+ asm("addqw #0x4,%sp"); /* put stack back where it was */
+ # define HAVE_PUSH_REGS
+ # else /* !__GNUC__*/
+ asm("subq.w &0x4,%sp"); /* allocate word on top of stack */
+
+ asm("mov.l %a2,(%sp)"); asm("jsr GC_push_one");
+ asm("mov.l %a3,(%sp)"); asm("jsr GC_push_one");
+ asm("mov.l %a4,(%sp)"); asm("jsr GC_push_one");
+ asm("mov.l %a5,(%sp)"); asm("jsr GC_push_one");
+ /* Skip frame pointer and stack pointer */
+ asm("mov.l %d1,(%sp)"); asm("jsr GC_push_one");
+ asm("mov.l %d2,(%sp)"); asm("jsr GC_push_one");
+ asm("mov.l %d3,(%sp)"); asm("jsr GC_push_one");
+ asm("mov.l %d4,(%sp)"); asm("jsr GC_push_one");
+ asm("mov.l %d5,(%sp)"); asm("jsr GC_push_one");
+ asm("mov.l %d6,(%sp)"); asm("jsr GC_push_one");
+ asm("mov.l %d7,(%sp)"); asm("jsr GC_push_one");
+
+ asm("addq.w &0x4,%sp"); /* put stack back where it was */
+ # define HAVE_PUSH_REGS
+ # endif /* !__GNUC__ */
+ # endif /* M68K/SYSV */
+
+ # if defined(PJ)
+ {
+ register int * sp asm ("optop");
+ extern int *__libc_stack_end;
+
+ GC_push_all_stack (sp, __libc_stack_end);
+ # define HAVE_PUSH_REGS
+ /* Isn't this redundant with the code to push the stack? */
+ }
+ # endif
+
+ /* other machines... */
+ # if !defined(HAVE_PUSH_REGS)
+ --> We just generated an empty GC_push_regs, which
+ --> is almost certainly broken. Try defining
+ --> USE_GENERIC_PUSH_REGS instead.
+ # endif
+ }
+ #endif /* !USE_GENERIC_PUSH_REGS && !USE_ASM_PUSH_REGS */
+
+ #if defined(USE_GENERIC_PUSH_REGS)
+ void GC_generic_push_regs(cold_gc_frame)
+ ptr_t cold_gc_frame;
+ {
+ {
+ # ifdef HAVE_BUILTIN_UNWIND_INIT
+ /* This was suggested by Richard Henderson as the way to */
+ /* force callee-save registers and register windows onto */
+ /* the stack. */
+ __builtin_unwind_init();
+ # else /* !HAVE_BUILTIN_UNWIND_INIT */
+ /* Generic code */
+ /* The idea is due to Parag Patel at HP. */
+ /* We're not sure whether he would like */
+ /* to be he acknowledged for it or not. */
+ jmp_buf regs;
+ register word * i = (word *) regs;
+ register ptr_t lim = (ptr_t)(regs) + (sizeof regs);
+
+ /* Setjmp doesn't always clear all of the buffer. */
+ /* That tends to preserve garbage. Clear it. */
+ for (; (char *)i < lim; i++) {
+ *i = 0;
+ }
+ # if defined(POWERPC) || defined(MSWIN32) || defined(MSWINCE) \
+ || defined(UTS4) || defined(LINUX) || defined(EWS4800)
+ (void) setjmp(regs);
+ # else
+ (void) _setjmp(regs);
+ # endif
+ # endif /* !HAVE_BUILTIN_UNWIND_INIT */
+ # if (defined(SPARC) && !defined(HAVE_BUILTIN_UNWIND_INIT)) \
+ || defined(IA64)
+ /* On a register window machine, we need to save register */
+ /* contents on the stack for this to work. The setjmp */
+ /* is probably not needed on SPARC, since pointers are */
+ /* only stored in windowed or scratch registers. It is */
+ /* needed on IA64, since some non-windowed registers are */
+ /* preserved. */
+ {
+ GC_save_regs_ret_val = GC_save_regs_in_stack();
+ /* On IA64 gcc, could use __builtin_ia64_flushrs() and */
+ /* __builtin_ia64_flushrs(). The latter will be done */
+ /* implicitly by __builtin_unwind_init() for gcc3.0.1 */
+ /* and later. */
+ }
+ # endif
+ GC_push_current_stack(cold_gc_frame);
+ }
+ }
+ #endif /* USE_GENERIC_PUSH_REGS */
+
+ /* On register window machines, we need a way to force registers into
*/
+ /* the stack. Return sp. */
+ # ifdef SPARC
+ asm(" .seg \"text\"");
+ # if defined(SVR4) || defined(NETBSD)
+ asm(" .globl GC_save_regs_in_stack");
+ asm("GC_save_regs_in_stack:");
+ asm(" .type GC_save_regs_in_stack,#function");
+ # else
+ asm(" .globl _GC_save_regs_in_stack");
+ asm("_GC_save_regs_in_stack:");
+ # endif
+ # if defined(__arch64__) || defined(__sparcv9)
+ asm(" save %sp,-128,%sp");
+ asm(" flushw");
+ asm(" ret");
+ asm(" restore %sp,2047+128,%o0");
+ # else
+ asm(" ta 0x3 ! ST_FLUSH_WINDOWS");
+ asm(" retl");
+ asm(" mov %sp,%o0");
+ # endif
+ # ifdef SVR4
+ asm(" .GC_save_regs_in_stack_end:");
+ asm(" .size
GC_save_regs_in_stack,.GC_save_regs_in_stack_end-GC_save_regs_in_stack");
+ # endif
+ # ifdef LINT
+ word GC_save_regs_in_stack() { return(0 /* sp really */);}
+ # endif
+ # endif
+
+ /* On IA64, we also need to flush register windows. But they end */
+ /* up on the other side of the stack segment. */
+ /* Returns the backing store pointer for the register stack. */
+ /* We now implement this as a separate assembly file, since inline */
+ /* assembly code here doesn't work with either the Intel or HP
*/
+ /* compilers. */
+ # if 0
+ # ifdef LINUX
+ asm(" .text");
+ asm(" .psr abi64");
+ asm(" .psr lsb");
+ asm(" .lsb");
+ asm("");
+ asm(" .text");
+ asm(" .align 16");
+ asm(" .global GC_save_regs_in_stack");
+ asm(" .proc GC_save_regs_in_stack");
+ asm("GC_save_regs_in_stack:");
+ asm(" .body");
+ asm(" flushrs");
+ asm(" ;;");
+ asm(" mov r8=ar.bsp");
+ asm(" br.ret.sptk.few rp");
+ asm(" .endp GC_save_regs_in_stack");
+ # endif /* LINUX */
+ # if 0 /* Other alternatives that don't work on HP/UX */
+ word GC_save_regs_in_stack() {
+ # if USE_BUILTINS
+ __builtin_ia64_flushrs();
+ return __builtin_ia64_bsp();
+ # else
+ # ifdef HPUX
+ _asm(" flushrs");
+ _asm(" ;;");
+ _asm(" mov r8=ar.bsp");
+ _asm(" br.ret.sptk.few rp");
+ # else
+ asm(" flushrs");
+ asm(" ;;");
+ asm(" mov r8=ar.bsp");
+ asm(" br.ret.sptk.few rp");
+ # endif
+ # endif
+ }
+ # endif
+ # endif
+
+ /* GC_clear_stack_inner(arg, limit) clears stack area up to limit and */
+ /* returns arg. Stack clearing is crucial on SPARC, so we supply */
+ /* an assembly version that's more careful. Assumes limit is hotter */
+ /* than sp, and limit is 8 byte aligned. */
+ #if defined(ASM_CLEAR_CODE)
+ #ifndef SPARC
+ --> fix it
+ #endif
+ # ifdef SUNOS4
+ asm(".globl _GC_clear_stack_inner");
+ asm("_GC_clear_stack_inner:");
+ # else
+ asm(".globl GC_clear_stack_inner");
+ asm("GC_clear_stack_inner:");
+ asm(".type GC_save_regs_in_stack,#function");
+ # endif
+ #if defined(__arch64__) || defined(__sparcv9)
+ asm("mov %sp,%o2"); /* Save sp */
+ asm("add %sp,2047-8,%o3"); /* p = sp+bias-8 */
+ asm("add %o1,-2047-192,%sp"); /* Move sp out of the way, */
+ /* so that traps still work. */
+ /* Includes some extra words */
+ /* so we can be sloppy below. */
+ asm("loop:");
+ asm("stx %g0,[%o3]"); /* *(long *)p = 0 */
+ asm("cmp %o3,%o1");
+ asm("bgu,pt %xcc, loop"); /* if (p > limit) goto loop */
+ asm("add %o3,-8,%o3"); /* p -= 8 (delay slot) */
+ asm("retl");
+ asm("mov %o2,%sp"); /* Restore sp., delay slot */
+ #else
+ asm("mov %sp,%o2"); /* Save sp */
+ asm("add %sp,-8,%o3"); /* p = sp-8 */
+ asm("clr %g1"); /* [g0,g1] = 0 */
+ asm("add %o1,-0x60,%sp"); /* Move sp out of the way, */
+ /* so that traps still work. */
+ /* Includes some extra words */
+ /* so we can be sloppy below. */
+ asm("loop:");
+ asm("std %g0,[%o3]"); /* *(long long *)p = 0 */
+ asm("cmp %o3,%o1");
+ asm("bgu loop "); /* if (p > limit) goto loop */
+ asm("add %o3,-8,%o3"); /* p -= 8 (delay slot) */
+ asm("retl");
+ asm("mov %o2,%sp"); /* Restore sp., delay slot */
+ #endif /* old SPARC */
+ /* First argument = %o0 = return value */
+ # ifdef SVR4
+ asm(" .GC_clear_stack_inner_end:");
+ asm(" .size
GC_clear_stack_inner,.GC_clear_stack_inner_end-GC_clear_stack_inner");
+ # endif
+
+ # ifdef LINT
+ /*ARGSUSED*/
+ ptr_t GC_clear_stack_inner(arg, limit)
+ ptr_t arg; word limit;
+ { return(arg); }
+ # endif
+ #endif
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Emacs-diffs] Changes to emacs/gc/mach_dep.c [Boehm-versions],
Dave Love <=