[Dvdrtools-users] DW-D26A

[fred]

Hi,
I just picked up some double layer disks (memorex DVD+R 2.4x 15pack) and I 
make coasters:
Thanks in advance for any suggestions.


address@hidden:~$ cat dvdrec
dvdrecord dev="1,1,0" -dao fs=8192k driveropts=burnfree -v -useinfo -speed=4 
-eject -pad -data "/md1/cdtmp/bak3-01.iso"

bits:/home/fred# ./dvdrec
pregap1: -1
dvdrtools v0.2.1
Portions (C) 2002-2005 Ark Linux <address@hidden>
This program is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free Software
Foundation; either version 2, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT 
ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
A PARTICULAR PURPOSE.  See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with
this program; see the file COPYING.  If not, write to the Free Software
Foundation, 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
Based on:
Cdrecord 1.11a15 (i386-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '1,1,0'
scsibus: 1 target: 1 lun: 0
Linux sg driver version: 3.1.25
Using libscg version 'bero-0.5a'
dvdrecord: Warning: using inofficial version of libscg (bero-0.5a 
'@(#)scsitransp.c     1.81 01/04/20 Copyright 1988,1995,2000 J. Schilling').
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'SONY    '
Identifikation : 'DVD RW DW-D26A  '
Revision       : 'JYS2'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags   : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1373184 = 1341 KB
FIFO size      : 16777216 = 16384 KB
Track 01: data  7821 MB         padsize:  30 KB
Total size:     8982 MB (889:57.21) = 4004791 sectors
Lout start:     8983 MB (889:59/16) = 4004791 sectors
Current Secsize: 2048
  ATIP start of lead out: 296550 (65:56/00)
Blocks total: 4173824 Blocks current: 4173824 Blocks remaining: 169033
Starting to write CD/DVD at speed 8 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is ON.
dvdrecord: Turning BURN-Free on
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 4004966
Track 01:   0 of 7821 MB written.dvdrecord: Input/output error. write_g1: scsi 
sendcmd: no error
CDB:  2A 00 00 3D 1C 66 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (logical block address out of range) [No matching 
qualifier] Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.003s timeout 200s

write track data: error after 0 bytes
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
Writing  time:   47.009s
Fixating...
Fixating time:    0.001s
dvdrecord: fifo had 255 puts and 1 gets.
dvdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.