[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [Dvdrtools-users] Reading the data back on a DVD-ROM
From: |
MAL |
Subject: |
RE: [Dvdrtools-users] Reading the data back on a DVD-ROM |
Date: |
06 Aug 2002 10:10:38 +0100 |
<snip>
> I'm creating my iso extended image file in the unix/linux world, and then
> coping it over to a windows machine that holds my dvd-r burner. I use
> windows software to burn the disk, but I can then read it in both worlds.
<snip>
Thanks for the info, but just to clarify, you haven't actually burned a
disk in Linux?
After all, that is what this list is for no?
My problem is that when I burn my ISO 9660 image, (made by mkisofs), to
a DVD-R using dvdrtools, I can only read it back on the DVD-RW drive,
(Pioneer 104). I cannot read it back on my DVD-ROM drive, (Samsung),
under Linux or Windows.
I know that this could just be the quality of my DVD-ROM drive, so I
will try it in a different make, but has anyone successfully done what
i'm trying to do?
Cheers all,
MAL
On Fri, 2002-08-02 at 20:48, Pence, Alan wrote:
> Mal,
>
> I have no problem reading dvd-r disks written using iso format on windows or
> on linux machines. I am however, keeping my fingers crossed, as the iso
> standard was not intended for this many potential files or for this amount
> of data, etc. I am quite worried that it will fail on me one day, not
> because of the process, but from my data. If you can read the disk on the
> same machine that you burned it on, that is my first question. Next
> question would be, how did you create the image (assuming that you used
> mkisofs) and burn it to the disk? Unfortunately, there are several reasons
> for the other drive not to read the disk.
>
> UDF is the newer, replacement format for ISO 9660 (and ISO 9660 with
> extensions), and I would prefer to use it. There are no unix/linux tools
> (that I know of) that will write a raw image file (the way that mkisofs
> does) with the UDF format. There are other applications that will write
> data to the drive in the UDF format, but none in the open source realm
> (unless you are writing to a DVD-RAM or other dvd re-writable format).
>
> I'm creating my iso extended image file in the unix/linux world, and then
> coping it over to a windows machine that holds my dvd-r burner. I use
> windows software to burn the disk, but I can then read it in both worlds.
>
> When I win the lottery, I fully intend to sit down and write an app that
> will create a UDF image file (in the manner of mkisofs). And then all we
> have to do is write that raw image file to dvd-r. :) Well, I have to dream.
> ;)
>
> Cheers,
> Alan Pence
>
>
> -----Original Message-----
> From: MAL [mailto:address@hidden
> Sent: Friday, August 02, 2002 8:43 AM
> To: address@hidden
> Subject: [Dvdrtools-users] Reading the data back on a DVD-ROM
>
>
> Ok, got it working... it was because the DVD-R in the drive was already
> (partially) written to. I would just like to state that dvdrecord telling
> me:
>
> dvdrecord: Data will not fit on any disk.
> dvdrecord: Cannot write CD's >= 100 minutes.
>
> Is possibly one of the less useful messages i've ever encountered :p
>
>
> I burned a 4.3GB iso fine, but I can't read it back on a bog standard
> DVD-ROM drive. Can any of you tell me whether this is a physical limitation
> of the DVD-R format (and/or DVD-ROM drives), or whether it's just the format
> i'm writing them in?
>
> I understand that UDF is the standard format for DVD writing, but I just
> want to be able to read it back on a linux PC with a DVD-ROM drive. Has
> anyone had any success with Linux, UDF, DVD-Rs and reading it back ?
>
> MAL
>
>
> _______________________________________________
> Dvdrtools-users mailing list address@hidden
> http://mail.freesoftware.fsf.org/mailman/listinfo/dvdrtools-users
>
> _______________________________________________
> Dvdrtools-users mailing list
> address@hidden
> http://mail.freesoftware.fsf.org/mailman/listinfo/dvdrtools-users