[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] ?==?utf-8?q? USRP X310 frontend name problem
|
From: |
Galland Nicolas |
|
Subject: |
Re: [Discuss-gnuradio] ?==?utf-8?q? USRP X310 frontend name problem |
|
Date: |
Fri, 15 Dec 2017 16:16:21 +0100 |
|
User-agent: |
SOGoMail 2.3.11 |
Le Vendredi 15 Décembre 2017 15:58 CET, "Marcus D. Leech" <address@hidden> a
écrit:
> On 12/15/2017 06:31 AM, Galland Nicolas wrote:
> > Hello everyone !
> >
> > I am using a USRP x310 for more than a year, and for some reasons I had to
> > change the computer. On a new installation of Ubuntu 16.04, I then
> > installed uhd and gnuradio from the source using Marcus Leech's
> > build-gnuradio script. The installation was successful, but I had to load a
> > new FPGA image beause of version compatibility.
> >
> > In the end, I am able to find the x310 and use it for some tests
> > (typically, everythong described on the "Verifying the Operation of the
> > USRP Using UHD and GNU Radio" page of ettus knowledge is working)
> >
> > However, when I want to try the flowgraph I used before reinstallation, I
> > have an error about the frontend name :
> >
> > RuntimeError: RuntimeError: Invalid daughterboard frontend name: A
> >
> > I am using two LFRX and the subdev specification is "A:A B:A". Moreover,
> > it's working with the subdev specification "A:AB B:AB", which is not what I
> > want...
> > When I use the uhd_usrp_probe command, it gives me the name of all the
> > frontends, and A is one of those names.
> >
> > Can it be some problem in the gnuradio uhd library ?
> > Or some parameters I should put somewhere after Installation ?
> >
> > Any help would be useful.
> >
> > Have a nice day !
> >
> > best regards,
> > Nicolas
> >
> >
> > _______________________________________________
> > Discuss-gnuradio mailing list
> > address@hidden
> > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> Could you share the output from uhd_usrp_probe ?
>
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
Helle, here it is. I triex with a very simple flowgraph in RX and in TX with
frontend A, but none of the worked.
linux; GNU C++ version 5.4.0 20160609; Boost_105800;
UHD_003.010.002.000-3-g122bfae1
-- X300 initialization sequence...
-- Determining maximum frame size... 1472 bytes.
-- Setup basic communication...
-- Loading values from EEPROM...
-- Setup RF frontend clocking...
-- Radio 1x clock:200
-- Detecting internal GPSDO.... Found an internal GPSDO: LC_XO, Firmware Rev
0.929a
-- [DMA FIFO] Running BIST for FIFO 0... pass (Throughput: 1290.3MB/s)
-- [DMA FIFO] Running BIST for FIFO 1... pass (Throughput: 1304.6MB/s)
-- [RFNoC Radio] Performing register loopback test... pass
-- [RFNoC Radio] Performing register loopback test... pass
-- [RFNoC Radio] Performing register loopback test... pass
-- [RFNoC Radio] Performing register loopback test... pass
-- Performing timer loopback test... pass
-- Performing timer loopback test... pass
_____________________________________________________
/
| Device: X-Series Device
| _____________________________________________________
| /
| | Mboard: X310
| | revision: 6
| | product: 30410
| | mac-addr0: 00:80:2f:21:20:29
| | mac-addr1: 00:80:2f:21:20:2a
| | gateway: 192.168.10.1
| | ip-addr0: 192.168.88.12
| | subnet0: 255.255.255.0
| | ip-addr1: 192.168.20.2
| | subnet1: 255.255.255.0
| | ip-addr2: 192.168.30.2
| | subnet2: 255.255.255.0
| | ip-addr3: 192.168.40.2
| | subnet3: 255.255.255.0
| | serial: 308C9B9
| | FW Version: 5.1
| | FPGA Version: 33.0
| | RFNoC capable: Yes
| |
| | Time sources: internal, external, gpsdo
| | Clock sources: internal, external, gpsdo
| | Sensors: gps_gpgga, gps_gprmc, gps_time, gps_locked, gps_servo,
ref_locked
| | _____________________________________________________
| | /
| | | RX Dboard: A
| | | ID: LF RX (0x000f)
| | | Serial: E1R12Y1RL
| | | _____________________________________________________
| | | /
| | | | RX Frontend: AB
| | | | Name: LFRX (AB)
| | | | Antennas:
| | | | Sensors:
| | | | Freq range: -32.000 to 32.000 MHz
| | | | Gain Elements: None
| | | | Bandwidth range: 64000000.0 to 64000000.0 step 0.0 Hz
| | | | Connection Type: IQ
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | RX Frontend: BA
| | | | Name: LFRX (BA)
| | | | Antennas:
| | | | Sensors:
| | | | Freq range: -32.000 to 32.000 MHz
| | | | Gain Elements: None
| | | | Bandwidth range: 64000000.0 to 64000000.0 step 0.0 Hz
| | | | Connection Type: QI
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | RX Frontend: A
| | | | Name: LFRX (A)
| | | | Antennas:
| | | | Sensors:
| | | | Freq range: -32.000 to 32.000 MHz
| | | | Gain Elements: None
| | | | Bandwidth range: 32000000.0 to 32000000.0 step 0.0 Hz
| | | | Connection Type: I
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | RX Frontend: B
| | | | Name: LFRX (B)
| | | | Antennas:
| | | | Sensors:
| | | | Freq range: -32.000 to 32.000 MHz
| | | | Gain Elements: None
| | | | Bandwidth range: 32000000.0 to 32000000.0 step 0.0 Hz
| | | | Connection Type: Q
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | RX Codec: A
| | | | Name: ads62p48
| | | | Gain range digital: 0.0 to 6.0 step 0.5 dB
| | _____________________________________________________
| | /
| | | RX Dboard: B
| | | ID: LF RX (0x000f)
| | | Serial: EDR12YBRL
| | | _____________________________________________________
| | | /
| | | | RX Frontend: AB
| | | | Name: LFRX (AB)
| | | | Antennas:
| | | | Sensors:
| | | | Freq range: -32.000 to 32.000 MHz
| | | | Gain Elements: None
| | | | Bandwidth range: 64000000.0 to 64000000.0 step 0.0 Hz
| | | | Connection Type: IQ
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | RX Frontend: BA
| | | | Name: LFRX (BA)
| | | | Antennas:
| | | | Sensors:
| | | | Freq range: -32.000 to 32.000 MHz
| | | | Gain Elements: None
| | | | Bandwidth range: 64000000.0 to 64000000.0 step 0.0 Hz
| | | | Connection Type: QI
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | RX Frontend: A
| | | | Name: LFRX (A)
| | | | Antennas:
| | | | Sensors:
| | | | Freq range: -32.000 to 32.000 MHz
| | | | Gain Elements: None
| | | | Bandwidth range: 32000000.0 to 32000000.0 step 0.0 Hz
| | | | Connection Type: I
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | RX Frontend: B
| | | | Name: LFRX (B)
| | | | Antennas:
| | | | Sensors:
| | | | Freq range: -32.000 to 32.000 MHz
| | | | Gain Elements: None
| | | | Bandwidth range: 32000000.0 to 32000000.0 step 0.0 Hz
| | | | Connection Type: Q
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | RX Codec: B
| | | | Name: ads62p48
| | | | Gain range digital: 0.0 to 6.0 step 0.5 dB
| | _____________________________________________________
| | /
| | | TX Dboard: A
| | | ID: Basic TX (0x0000)
| | | Serial: EAR03XFTB
| | | _____________________________________________________
| | | /
| | | | TX Frontend: AB
| | | | Name: BasicTX (AB)
| | | | Antennas:
| | | | Sensors:
| | | | Freq range: -250.000 to 250.000 MHz
| | | | Gain Elements: None
| | | | Bandwidth range: 500000000.0 to 500000000.0 step 0.0 Hz
| | | | Connection Type: IQ
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | TX Frontend: BA
| | | | Name: BasicTX (BA)
| | | | Antennas:
| | | | Sensors:
| | | | Freq range: -250.000 to 250.000 MHz
| | | | Gain Elements: None
| | | | Bandwidth range: 500000000.0 to 500000000.0 step 0.0 Hz
| | | | Connection Type: QI
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | TX Frontend: A
| | | | Name: BasicTX (A)
| | | | Antennas:
| | | | Sensors:
| | | | Freq range: -250.000 to 250.000 MHz
| | | | Gain Elements: None
| | | | Bandwidth range: 250000000.0 to 250000000.0 step 0.0 Hz
| | | | Connection Type: I
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | TX Frontend: B
| | | | Name: BasicTX (B)
| | | | Antennas:
| | | | Sensors:
| | | | Freq range: -250.000 to 250.000 MHz
| | | | Gain Elements: None
| | | | Bandwidth range: 250000000.0 to 250000000.0 step 0.0 Hz
| | | | Connection Type: Q
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | TX Codec: A
| | | | Name: ad9146
| | | | Gain Elements: None
| | _____________________________________________________
| | /
| | | TX Dboard: B
| | | ID: Basic TX (0x0000)
| | | Serial: E0R04X5TB
| | | _____________________________________________________
| | | /
| | | | TX Frontend: AB
| | | | Name: BasicTX (AB)
| | | | Antennas:
| | | | Sensors:
| | | | Freq range: -250.000 to 250.000 MHz
| | | | Gain Elements: None
| | | | Bandwidth range: 500000000.0 to 500000000.0 step 0.0 Hz
| | | | Connection Type: IQ
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | TX Frontend: BA
| | | | Name: BasicTX (BA)
| | | | Antennas:
| | | | Sensors:
| | | | Freq range: -250.000 to 250.000 MHz
| | | | Gain Elements: None
| | | | Bandwidth range: 500000000.0 to 500000000.0 step 0.0 Hz
| | | | Connection Type: QI
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | TX Frontend: A
| | | | Name: BasicTX (A)
| | | | Antennas:
| | | | Sensors:
| | | | Freq range: -250.000 to 250.000 MHz
| | | | Gain Elements: None
| | | | Bandwidth range: 250000000.0 to 250000000.0 step 0.0 Hz
| | | | Connection Type: I
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | TX Frontend: B
| | | | Name: BasicTX (B)
| | | | Antennas:
| | | | Sensors:
| | | | Freq range: -250.000 to 250.000 MHz
| | | | Gain Elements: None
| | | | Bandwidth range: 250000000.0 to 250000000.0 step 0.0 Hz
| | | | Connection Type: Q
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | TX Codec: B
| | | | Name: ad9146
| | | | Gain Elements: None
| | _____________________________________________________
| | /
| | | RFNoC blocks on this device:
| | |
| | | * DmaFIFO_0
| | | * Radio_0
| | | * Radio_1
| | | * DDC_0
| | | * DDC_1
| | | * DUC_0
| | | * DUC_1