[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] Recover the signal

From: Marcus Müller
Subject: Re: [Discuss-gnuradio] Recover the signal
Date: Thu, 15 Oct 2015 13:54:40 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0

Hi Maksim,

you're right, the raw sample data can't contain any sideband information such as to what the USRP was tuned to.
Maybe you just want to use the "tag debug" block to print out the sample offsets at which an rx_freq tag was seen, and parse that textual information.

Best regards,

On 10/15/2015 12:13 PM, scott tiger wrote:
Dear all,
I tried to implement the frequency hopping and I did it, But I have one problem. After stored the signal in dat file and tried to separate the frequencies in matlab "it is imposible to do that".
Can you tell me please if there is some block in GNUradio which can I use to store the changing frequency to be comparable whith the received signal to cut the received signal according to the generated frequency?

Thank you for any advice

Discuss-gnuradio mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]