[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] Problems closing a valve block with a Python Block
From: |
Juan Pimentel |
Subject: |
[Discuss-gnuradio] Problems closing a valve block with a Python Block |
Date: |
Tue, 08 Sep 2015 19:15:39 +0200 |
Hello:
We have successfully used a GUI block to open (or close) a valve by
pressing the mouse button.
Now we want to open (or close) the valve from a Python block that we
are writing after comparing two messages. If the messages are the same,
we want to open the valve, otherwise the valve should remain closed.
Below is the xml definition of our Python block as well as the Python
code. The problem we are having is that GRC does not allow us to compile
the code. The variable beacon_tx is not recognized by the valve block.
Can somebody help u with this issue?
Thanks.
XML FILE
***************************************************
<?xml version="1.0"?>
<block>
<name>compare</name>
<key>conditions_compare</key>
<category>conditions</category>
<import>import conditions</import>
<make>conditions.compare()</make>
<!-- Make one 'param' node for every Parameter you want settable from
the GUI.
Sub-nodes:
* name
* key (makes the value accessible as $keyname, e.g. in the make
node)
* type -->
<!-- Make one 'sink' node per input. Sub-nodes:
* name (an identifier for the GUI)
* type
* vlen
* optional (set to 1 for optional inputs) -->
<sink>
<name>in</name>
<type>int</type>
</sink>
<sink>beacon_tx
<name>in</name>
<type>int</type>
</sink>
<!-- Make one 'source' node per output. Sub-nodes:
* name (an identifier for the GUI)
* type
* vlen
* optional (set to 1 for optional inputs) -->
</block>
****************************************************************
PYTHON CODE
***************************************************************
import numpy
import smbus
import time
import subprocess
beacon_tx
from gnuradio import gr
class compare(gr.sync_block):
"""
docstring for block compare
"""
def __init__(self):
gr.sync_block.__init__(self,
name="compare",beacon_tx
in_sig=[numpy.int,numpy.int],beacon_tx
out_sig=None)
def work(self, input_items, output_items):
in0 = input_items[0]
in1 = input_items[1]
if numpy.array_equal(in0,in1):
self.beacon_tx = True
pr.sync_block):
"""
docstring for block compare
"""
def __init__(self):
gr.sync_block.__init__(self,
name="compare",
in_sig=[numpy.int,numpy.int],
out_sig=None)
def work(self, input_items, output_items):
in0 = input_items[0]
in1 = input_items[1]
if numpy.array_equal(in0,in1):
self.beacon_tx = True
print True
else:
self.beacon_tx = False
print False
# <+signal processing here+>
return len(self.beacon_tx)
--
Posted via http://www.ruby-forum.com/.
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Discuss-gnuradio] Problems closing a valve block with a Python Block,
Juan Pimentel <=