|
From: | Ron Economos |
Subject: | Re: [Discuss-gnuradio] ssb - question |
Date: | Tue, 08 Sep 2015 10:11:58 -0700 |
User-agent: | Mozilla/5.0 (X11; Linux i686; rv:24.0) Gecko/20100101 Thunderbird/24.6.0 |
http://www.w6rz.net/ssb.grc and the test audio file: http://www.w6rz.net/ssbaudio.wavThe flow graph is set up for LSB. For USB, just swap the Band Pass Filter block with the one that's disabled.
The 10 kHz signal source and multiply blocks are optional. I use this to move the TX signal away from the DC offset spike of my receiver.
Original flow graph is here: https://github.com/argilo/sdr-examples https://github.com/argilo/sdr-examples/blob/master/multi_tx.grc Ron On 09/08/2015 05:48 AM, Przemek Lewandowski wrote:
Hi everybodyIm trying to make SSB modulation with Hilbert transform. And Im using IQ modulatorhere is schema: http://postimg.org/image/gms5srret/And I have a question. In Frequency domain there should be one peak, and on on my plot there is one - that is good, and second that is smaller/suppressed.Is something wrong ?? or is it normal ??Is Hilbert method for creating SSB signal is good ?? or can it be made easier ???thank you very much. Przemek Lewandowski
ssbflow.png
Description: PNG image
[Prev in Thread] | Current Thread | [Next in Thread] |