[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] problem with packet decoder for gmsk
From: |
Martin Braun |
Subject: |
Re: [Discuss-gnuradio] problem with packet decoder for gmsk |
Date: |
Thu, 27 Mar 2014 09:52:53 +0100 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Thunderbird/24.4.0 |
On 03/26/2014 12:30 PM, Ank wrote:
> Hello all,
> I'm working on gmsk transmitter and receiver past 6 months , the problem
> that I'm facing is in the packet decoder.
>
> I tried with wav file and signal source it worked good.
>
> my block is of this type
>
>
> Random_source=>Packet_encoder=>gmsk_modulator=>rational_resamlper_1=>uhd_sink
>
>
> uhd_source=>rational_resampler_2=>low_pass_filter=>gmsk_demodulator=>packet_decoder=>scope_sink/file_sink
There are a lot of things that can go wrong in this setup. Maybe the
sync is not locking fast enough, and destroying the preamble. It's hard
for us to figure this out from a distance.
Try replacing the UHDs with a channel model, and go crazy with that. See
what happens.
M