Re: [Discuss-gnuradio] USRP2 kit is not detected by desktop's ethernet port at all

[Adeel Anwar]

Swrangsar,

For checking desktop's ethernet interface speed u can use ethtool

sudo apt-get install ethtool
ethtool eth0

-Adeel

On Fri, May 24, 2013 at 1:10 PM, swrangsar basumatary <address@hidden> wrote:

Hi,

We installed the latest UHD-003.005.003 with gnuradio-3.6.4.1 on a 32-bit PC running Ubuntu 11.04, but the USRP2 kit is just not getting detected (the green LED near the ethernet port of the USRP2 kit does not glow).

We even tried gnuradio-3.6.0 and UHD-003.005.002 yet there is no change at all.

We are using a Gigabit ethernet cable, but we are not sure if the desktop's ethernet interface supports gigabit transmission.

Meanwhile, on a macbook pro (running Mac OS X Lion with neither Gnuradio nor the UHD installed), the USRP2's ethernet port green LED was glowing.

Thanks,

swrangsar

_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio