Re: [Discuss-gnuradio] GNU Radio + UHD install

[Vlad Stoianovici]

Never mind, I managed to answer my own question:
For those of you who might be interested, the UHD images can be found
locally if you used the above script at (at least on my computer):
/usr/local/share/uhd/images
while if you want to download the UHD images manually you can go to 
http://code.ettus.com/redmine/ettus/projects/uhd/wiki
http://code.ettus.com/redmine/ettus/projects/uhd/wiki  a then click on the
blue link that says "Download images from master branch". 
In the downloaded archive you will find images for USRP1, USRP2, USRP E100,
N200 and N210 both for FPGA and for firmaware (fw).



Vlad Stoianovici wrote:
> 
> Hi Marcus, 
> I figured that the firmware might be out of date especially since they are
> almost a year old (this is why I mentioned them).
> Since I'm new to UHD could you tell me where exactly are they located in
> the UHD folder. 
> Is there any further compiling necessary in order to obtain the .bin files
> (as I suspect there is)?
> How would I normally get those images (without using the build-uhd
> script)?
> 
> 
>> 
>> If what you report about your firmware images is accurate, then they're
>> horribly out of date.
>> 
>> The build-gnuradio script will have downloaded the latest firmware
>> images, which you should program
>>   into your USRP2.
>> 
>> Also, you're using the wrong source block in GRC--you need a UHD block,
>> not a (traditional) USRP2
>>   block.  UHD has a completely different set of source/sink blocks than
>> "traditional", although the
>>   "traditional" blocks are still there in GRC.
>> 
>> 
> 
> 

-- 
View this message in context: 
http://old.nabble.com/GNU-Radio-%2B-UHD-install-tp29561741p31611803.html
Sent from the GnuRadio mailing list archive at Nabble.com.