Re: [Discuss-gnuradio] Any GR MacOS X 10.5 Intel Users?

[Thomas Schmid]

I use SDCC 2.8.0 from macports. Seems to work without any problems.

On Sun, Oct 5, 2008 at 4:31 PM, Michael Dickens <address@hidden> wrote:
> Thomas - Thanks for the feedback; it looks from our testing as if Apple's
> 10.5.5 tweaked some internal USB parameters to tighten down timing or
> something.  Some USRPs' USB transport is "on the sloppy side" now compared
> to 10.5.4 (and previous), while others are not.  Really not sure what the
> issue is, but it seems as though it's very few folks with the issue so I'm
> not going to bother investigating further.
>
> Are you using SDCC 2.8.0 from MacPorts, or some other version?  If the
> latter, could you try the former?  This is reversible if it doesn't work ...
>
> 0) If you have SDCC 2.4.0 installed by my script, then you need to remove it
> first; else go to (1):
>
> curl -o sdcc-2.4.0-i386_rm.sh
> http://www.nd.edu/~mdickens/GNURadio/sdcc-2.4.0-i386_rm.sh
> chmod a+x sdcc-2.4.0-i386_rm.sh
> sudo ./sdcc-2.4.0-i386_rm.sh
>
> 1) now update MacPorts and install its SDCC:
>
> sudo port sync
> sudo port upgrade sdcc
>
> 2) then go to your GNU Radio install trunk:
>
> cd usrp
> make clean
> cd ..
> make
> sudo make install
>
> 3) then go and try the usrp benchmark (in gnuradio-examples/python/usrp) or
> some other USRP / USB transfer demo / example / application.  If it works,
> then I think SDCC 2.8.0 on Intel-Mac is working.  Thanks! - MLD
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>



-- 
"Don't complain; Just work harder" - Randy Pausch

Thomas Schmid, Ph.D. Candidate
Networked & Embedded Systems Laboratory (NESL)
University of California, Los Angeles (UCLA)

http://gresci.blogspot.com/ - Science articles on green technology