[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] byte-wide ADC transfers
From: |
Clark Pope |
Subject: |
Re: [Discuss-gnuradio] byte-wide ADC transfers |
Date: |
Mon, 13 Feb 2006 20:28:07 -0500 |
It just under/overflows. Basically hangs without updating the fft.
----Original Message Follows----
From: Eric Blossom <address@hidden>
To: Clark Pope <address@hidden>
CC: address@hidden
Subject: Re: [Discuss-gnuradio] byte-wide ADC transfers
Date: Mon, 13 Feb 2006 14:22:39 -0800
On Sun, Feb 12, 2006 at 10:36:24PM -0500, Clark Pope wrote:
> I was able to get it work if I comment out the call to make_format and
hard
> coding the format:
>
> if options.width_8:
> width = 8
> shift = 8
> #format = self.u.make_format(width, shift)
> format = 0x288
> print "format =", hex(format)
> r = self.u.set_format(format)
> print "set_format =", r
>
>
> However, it still doesn't work at the 16 MHz data rate even though 8 Mhz
> 16-bit data rate does work?
When you say "doesn't work" what do you mean?
Eric
_________________________________________________________________
FREE pop-up blocking with the new MSN Toolbar get it now!
http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/
- Re: [Discuss-gnuradio] byte-wide ADC transfers, Clark Pope, 2006/02/12
- Re: [Discuss-gnuradio] byte-wide ADC transfers, Eric Blossom, 2006/02/13
- Re: [Discuss-gnuradio] byte-wide ADC transfers, Clark Pope, 2006/02/18
- Re: [Discuss-gnuradio] byte-wide ADC transfers, Eric Blossom, 2006/02/18
- Re: [Discuss-gnuradio] byte-wide ADC transfers, Clark Pope, 2006/02/19
- Re: [Discuss-gnuradio] byte-wide ADC transfers, Eric Blossom, 2006/02/19
- Re: [Discuss-gnuradio] byte-wide ADC transfers, Clark Pope, 2006/02/20
- Re: [Discuss-gnuradio] byte-wide ADC transfers, Eric Blossom, 2006/02/20
Re: [Discuss-gnuradio] byte-wide ADC transfers, Eric Blossom, 2006/02/13