[Commit-gnuradio] r7028 - usrp2/trunk/fpga/top/u2_basic

[matt]

Author: matt
Date: 2007-11-26 16:17:18 -0700 (Mon, 26 Nov 2007)
New Revision: 7028

Modified:
   usrp2/trunk/fpga/top/u2_basic/u2_basic.v
Log:
specify fifo sizes at top level


Modified: usrp2/trunk/fpga/top/u2_basic/u2_basic.v
===================================================================
--- usrp2/trunk/fpga/top/u2_basic/u2_basic.v    2007-11-26 23:16:32 UTC (rev 
7027)
+++ usrp2/trunk/fpga/top/u2_basic/u2_basic.v    2007-11-26 23:17:18 UTC (rev 
7028)
@@ -502,7 +502,7 @@
        adc_ovf_b_reg2 <= adc_ovf_b_reg1;
      end // always @ (posedge dsp_clk)
 
-   rx_control rx_control
+   rx_control #(.FIFOSIZE(10)) rx_control
      (.clk(dsp_clk), .rst(dsp_rst),
       .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
       .master_time(master_time),.overrun(overrun),
@@ -516,7 +516,7 @@
       .adc_a(adc_a),.adc_ovf_a(adc_ovf_a),.adc_b(adc_b),.adc_ovf_b(adc_ovf_b),
       .sample(sample_rx), .run(run_rx), .strobe(strobe_rx) );
 
-   tx_control tx_control
+   tx_control #(.FIFOSIZE(10)) tx_control
      (.clk(dsp_clk), .rst(dsp_rst),
       .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
       .master_time(master_time),.underrun(underrun),
@@ -535,14 +535,14 @@
    // 
///////////////////////////////////////////////////////////////////////////////////
    // SERDES
 
-   serdes_tx serdes_tx
+   serdes_tx #(.FIFOSIZE(9)) serdes_tx
      (.clk(dsp_clk),.rst(dsp_rst),
       
.ser_tx_clk(ser_tx_clk),.ser_t(ser_t),.ser_tklsb(ser_tklsb),.ser_tkmsb(ser_tkmsb),
       
.rd_dat_i(rd0_dat),.rd_read_o(rd0_read),.rd_done_o(rd0_done),.rd_error_o(rd0_error),
       .rd_sop_i(rd0_sop),.rd_eop_i(rd0_eop)
       );
    
-   serdes_rx serdes_rx
+   serdes_rx #(.FIFOSIZE(9)) serdes_rx
      (.clk(dsp_clk),.rst(dsp_rst),
       
.ser_rx_clk(ser_rx_clk),.ser_r(ser_r),.ser_rklsb(ser_rklsb),.ser_rkmsb(ser_rkmsb),
       
.wr_dat_o(wr0_dat),.wr_write_o(wr0_write),.wr_done_o(wr0_done),.wr_error_o(wr0_error),